☆ 4.7 Article

The Re-/Up-Cycling of Wood Waste in Wood-Polymer Composites (WPCs) for Common Applications

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Synthesis, characterization and performance of nanocopper impregnated sawdust-reinforced nanocomposite

Md. Eyazul Haque et al.

Summary: By impregnating copper nanoparticles into Swietenia mahagoni sawdust, novel nanocomposites with improved mechanical properties, antifungal activity, and durability have been developed, showing potential as alternatives to wood in various industries.

POLYMER BULLETIN (2023)

添加到收藏夹

Article Materials Science, Composites

Determination of technological properties of wood plastic nanocomposites produced by flat press reinforced with nano MgO

Emre Birinci

Summary: Wood plastic nanocomposites (WPNC) reinforced with nano magnesium oxide (MgO) were produced using the dry blending method in a flat press. Technological properties of the produced WPNC panels were investigated, including density, water absorption, thickness swelling, tensile strength, bending strength, modulus of elasticity, surface roughness and Shore D hardness. The use of MAPP and nano MgO positively affected the water resistance and mechanical properties of WPNC panels. SEM micrographs showed that voids in WPNC panels were reduced with the increase of MAPP reinforcement and nano MgO ratio. Future studies are recommended to explore the biological resistance of nano MgO reinforced WPNCs due to its antibacterial, catalytic and photocatalytic properties.

JOURNAL OF COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Engineering, Environmental

Influences of Polycarboxylic Acid EDTA on the Compatibility and Physical Properties of Sandal Wood Flour Reinforced Poly(lactic acid)/poly(butylene adipate-co-terephthalate) Biocomposites

Yong-Gan Fang et al.

Summary: Different ratios of PLA/PBAT/SWF ternary biocomposites were prepared using melt reactive extrusion. EDTA was incorporated as a reactive compatibilizer to improve the interfacial adhesion between SWF and PLA/PBAT. The addition of EDTA improved the mechanical properties of the composites by forming a chemical bonding interface.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2023)

添加到收藏夹

Article Materials Science, Textiles

Plant Waste as Green Reinforcement for Polymer Composites: A Case Study of Pteris Vittata Roots

Irene Bavasso et al.

Summary: Waste roots of Pteris vittata were collected and used to develop composite materials based on high-density polyethylene. The composites with 20 wt.% filler content and coupling agent exhibited significant improvements in mechanical properties, including a 54% increase in tensile strength, 100% increase in Young's modulus, 46% increase in flexural strength, and 45% increase in flexural modulus. These findings demonstrate the potential of utilizing Pteris vittata waste roots for sustainable composite materials production.

JOURNAL OF NATURAL FIBERS (2023)

添加到收藏夹

Article Polymer Science

Competition of shearing and cavitation effects on the deformation behavior of isotactic polypropylene during stretching

YanXu Wang et al.

Summary: In this study, the influence of crystalline structures on the cavitation and shearing effects of alpha-iPP under tensile loading was investigated. It was found that the size of alpha-spherulite played a significant role in determining the dominant deformation behavior. Additionally, four typical deformation behaviors of alpha-iPP resulting from the competition between intra-spherulitic deformation and inter-spherulitic deformation were identified. The findings provide guidance for producing iPP films with desired structures and tunable functionalities.

POLYMER (2023)

添加到收藏夹

Review Forestry

Wood modification with nanoparticles fortified polymeric resins for producing nano-wood composites: a review

P. Nagraik et al.

Summary: Wood is a renewable building material that can meet the growing demand for sustainable materials. However, the wood-based sector is facing challenges in meeting the market demand due to scarce supply and legal restrictions on harvesting trees in natural forests. Fast-growing plantation trees are being studied as a potential raw material source, but the timber extracted from them has drawbacks that limit its usage. To overcome these issues, wood can be modified with thermoset and thermoplastic resins through impregnation. Nanomaterials can also be used to improve wood properties. Combining traditional wood modification techniques with nanotechnology can greatly enhance the properties of wood. Therefore, nano-wood composites made with nanoparticle-infused resins have the potential to replace high-quality wood for various applications.

JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2023)

添加到收藏夹

Article Materials Science, Composites

Effect of immidazolium-based green solvents on the moisture absorption and thickness swelling behavior of wood flour/polyethylene composites

Behzad Kord et al.

Summary: This study investigated the water transport kinetics and moisture-induced thickness swelling behavior of wood-plastic composites (WPCs) in the presence of two imidazolium-based ionic liquids (ILs). It was found that treating the composites with ILs reduced water absorption and thickness swelling. The presence of ILs improved the quality of adhesion between the polymer matrix and the cellulosic materials.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Polymer Science

A Critical Review on Wood-Based Polymer Composites: Processing, Properties, and Prospects

Manickam Ramesh et al.

Summary: Waste recycling is crucial for boosting circular economy, and wood-polymer composites (WPC) offer a wide range of applications with low environmental impact. Rheological characterization techniques are used to evaluate WPC quality. Bio-based adhesives can be used for manufacturing wood composites. WPC plays significant roles in various sectors such as construction and flooring.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Evaluation of microscopic structural changes during strain hardening of polyethylene solids using In situ Raman, SAXS, and WAXD measurements under step-cycle test

Takumitsu Kida et al.

Summary: In this study, the mechanism of strain hardening of polyethylene (PE) was investigated using in situ Raman spectroscopy, small-angle X-ray scattering, and wide-angle X-ray diffraction measurements. It was found that a stable fibrillar structure formed at the onset of strain hardening, and the fraction of long-consecutive trans chains increased and decreased during the stretching and unloading steps, respectively. The peak shift and broadening of the C-C stretching mode in the Raman spectrum indicated the concentration of stretching load on the taut-tie chains. Based on these findings, it was concluded that strain hardening in PE is caused by the increase in the number of taut-tie chains resulting from chain pull-out from the crystalline structure.

POLYMER (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recycling end-of-life WPC products into ultra-high-filled, high-performance wood fiber/polyethylene composites: a sustainable strategy for clean and cyclic processing in the WPC industry

Haiyang Zhou et al.

Summary: This study investigates the feasibility of recycling waste wood-plastic composites (WPCs) and improves the material's performance by adding a compatibilizer, enhancing water resistance, creep resistance, and dimensional stability. The results show that the recycled and reprocessed composites have better tensile and flexural properties compared to the waste materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Composites

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

Satya Guha Nukala et al.

Summary: The depletion of natural resources has led to increasing research on developing green and sustainable products using eco-friendly materials. This study utilized recycled plastic waste and recycled wood waste to develop wood polymer composites. The results showed that these composites exhibited good mechanical, thermal, and wettability properties, making them a promising environmentally-friendly material.

JOURNAL OF COMPOSITES SCIENCE (2022)

添加到收藏夹

Article Construction & Building Technology

Rheological behavior and mechanical properties of ultra-high-filled wood fiber/polypropylene composites using waste wood sawdust and recycled polypropylene as raw materials

Wei Tang et al.

Summary: This study successfully fabricated low-cost and high-strength ultra-high-filled wood fiber/polypropylene composites using recycled polypropylene and wood fiber, showing excellent mechanical properties and creep resistance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Tensile deformation mechanism of propylene-1-butene random copolymer: The role of initial crystalline morphology

Chengao Qian et al.

Summary: The structural evolution of two propylene 1-butene random copolymer (iPPBu) films with different initial crystalline morphology during uniaxial deformation was investigated. The initial morphology was found to influence the structural evolution of the samples, impacting cavitation, molecular chain orientation behavior, mesophase occurrence, and crystallinity reduction. The presence of nodular morphology in iPPBu led to differences in cavitation and crystallinity compared to samples with spherulitic morphology.

POLYMER (2021)

添加到收藏夹

Article Forestry

Wood plastic composites with improved electrical and thermal conductivity

Rathish Rajan et al.

Summary: Graphene nanoplatelets (GNP) are used to enhance the electrical and thermal conductivity of wood plastic composites (WPC), particularly in hybrids containing 20% wood flour. The addition of wood flour aids in the dispersion of GNP within the composite, improving electrical and thermal properties. Different cooling rates during hot pressing affect the surface resistivity of the composite materials.

WOOD SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

Md. Musharof Hussain Khan et al.

Summary: This study analyzes the environmental impacts of producing composite pallets made of wood and plastic waste and compares them with conventional wooden and plastic pallets. The results show that wood-polymer composite pallets have the lowest environmental impact in multiple categories, making them a better choice over plastic and wooden pallets.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2021)

添加到收藏夹

Article Polymer Science

Graphene nanoplatelets/organic wood dust hybrid composites: physical, mechanical and thermal characterization

Santosh Kumar et al.

Summary: The study found that adding a relatively low concentration of graphene nanoplatelets can significantly enhance the physical, mechanical, thermal, and fracture properties of microwood particle-reinforced epoxy composites, while higher wood particle loading can cause agglomeration and weaken the bonding with the epoxy matrix, leading to decreased properties.

IRANIAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Materials Science, Composites

Physical, mechanical, and thermal properties of Dalbergia sissoo wood waste-filled poly(lactic acid) composites

Tej Singh et al.

Summary: The study found that increasing wood waste content resulted in certain properties of the composite materials increasing, such as modulus, porosity, and water absorption, while other properties decreased such as density, tensile strength, impact strength, and stress at break. However, the flexural strength of the composites remained relatively constant. Differential scanning calorimetry analysis showed that wood waste helped increase the glass transition and cold crystallization temperature of PLA composites.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Polymer Science

Properties of Low-Cost WPCs Made from Alien Invasive Trees and rLDPE for Interior Use in Social Housing

Abubakar Sadiq Mohammed et al.

Summary: Low-cost wood-plastic composites (WPCs) were developed using invasive trees and recycled low-density polyethylene for affordable building materials in South Africa. The study demonstrated the feasibility of producing WPCs with satisfactory properties without the need for pre-processing or expensive modifiers, by utilizing the entire biomass of Acacia saligna and low-grade recycled polyethylene.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Cascading Recycling of Wood Waste: A Review

Arnaud Besserer et al.

Summary: Wood is a sought-after renewable resource, with waste wood being used for new material production. However, improvements in legislation and recycling processes are necessary to maximize reuse and enhance recycled wood properties. Innovations in sorting techniques, cleaning processes, and bioremediation are being developed in Europe to address these challenges.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Mechanical properties of fire retardant wood-plastic composites: A review

T. C. Mokhena et al.

Summary: This paper reviews the available literature on flame retardant WPCs in developing an optimum condition between the flammability and mechanical properties. It concentrates on the recent advances in the mechanical properties and flammability studies of wood flour-polymer composite products, highlighting the applications and durability of these flame retardant WPCs with future remarks.

EXPRESS POLYMER LETTERS (2021)

添加到收藏夹

Review Materials Science, Composites

Modified hemp fibers intended for fiber-reinforced polymer composites used in structural applications-A review. I. Methods of modification

Fulga Tanasa et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Production of wood-plastic composites using cedrela odorata sawdust waste and recycled thermoplastics mixture from post-consumer products - A sustainable approach for cleaner production in Cuba

Yonny Martinez Lopez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Environmental Sciences

Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites

Dildare Basalp et al.

WASTE AND BIOMASS VALORIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development and characterization of WPCs produced with high amount of wood residue

Josiane Dantas Viana Barbos et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Chemistry, Physical

Biochars from Post-Production Biomass and Waste from Wood Management: Analysis of Carbonization Products

Wojciech Kosakowski et al.

MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Mechanical, moisture absorption, biodegradation and physical properties of nanoclay-reinforced wood/plant oil composites

Moon Mandal et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Engineering, Civil

Flame-retardant wood polymer composites (WPCs) as potential fire safe bio-based materials for building products: Preparation, flammability and mechanical properties

Ehsan N. Kalali et al.

FIRE SAFETY JOURNAL (2019)

添加到收藏夹

Article Materials Science, Composites

Wood plastic composites made from post-used polystyrene foam and agricultural waste

Koay Seong Chun et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Mechanics

The effect of the use of construction and demolition waste on the mechanical and moisture properties of a wood-plastic composite

Marko Hyvarinen et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Manufacturing

The effect of fibreboard (MDF) disintegration technique on wood polymer composites (WPC) produced with recovered wood particles

Fahriye Yagmur Buetuen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Polymer Science

Biodegradable composites of recycled thermoplastic starch and sawdust: the effect of cellulose nanofibers, nanoclay and temperature

Salomeh E. Saieh et al.

IRANIAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Promoting Recycling of Mixed Waste Polymers in Wood-Polymer Composites Using Compatibilizers

Ossi Martikka et al.

RECYCLING (2019)

添加到收藏夹

Article Forestry

Effect of colloidal silica nanoparticles extracted from agricultural waste on physical, mechanical and antifungal properties of wood polymer composite

Maryam Ghorbani et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Potential use of different kinds of carbon in production of decayed wood plastic composite

Sheng-bo Ge et al.

ARABIAN JOURNAL OF CHEMISTRY (2018)

添加到收藏夹

Article Materials Science, Paper & Wood

Multi-component Polymer Systems Comprising Wood as Bio-based Component and Thermoplastic Polymer Matrices – An Overview

Carmen Alice Teaca et al.

BioResources (2018)

添加到收藏夹

Article Polymer Science

Wood-based composites with thermoplastic polyurethane as matrix polymer

Sylvia Diestel et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Engineering, Environmental

The use of waste materials in wood-plastic composites and their impact on the profitability of the product

Anna Keskisaari et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

添加到收藏夹

Article Engineering, Environmental

Influence of Organically Modified Nanoclay on Thermal and Combustion Properties of Bagasse Reinforced HDPE Nanocomposites

Behzad Kord et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)

添加到收藏夹

Article Engineering, Environmental

Life cycle assessment of wood-plastic composites: Analysing alternative materials and identifying an environmental sound end-of-life option

Philipp F. Sommerhuber et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

添加到收藏夹

Article Agricultural Engineering

Potential use of decayed wood in production of wood plastic composite

Nadir Ayrilmis et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

添加到收藏夹

Article Engineering, Environmental

Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites

Philipp F. Sommerhuber et al.

WASTE MANAGEMENT (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile strength of pine needles and their feasibility as reinforcement in composite materials

Chensong Dong et al.

JOURNAL OF MATERIALS SCIENCE (2014)

添加到收藏夹

Article Engineering, Environmental

Assessment of the coherence of the Swiss waste wood management

Francis C. Bergeron

RESOURCES CONSERVATION AND RECYCLING (2014)

添加到收藏夹

Article Chemistry, Physical

Cavitation during tensile deformation of isothermally crystallized polypropylene and high-density polyethylene

Andrzej Pawlak

COLLOID AND POLYMER SCIENCE (2013)

添加到收藏夹

Article Polymer Science

PHYSICOCHEMICAL AND MECHANICAL BEHAVIOR OF CELLULOSIC PINE NEEDLE-BASED BIOCOMPOSITES

V. K. Thakur et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2011)

添加到收藏夹

Article Polymer Science

Composite Boards from Isocyanate Bonded Pine Needles

M. Gupta et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

添加到收藏夹

Article Polymer Science

The Effects of Clay Dispersion on the Mechanical, Physical, and Flame-Retarding Properties of Wood Fiber/Polyethylene/Clay Nanocomposites

Yoon H. Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

添加到收藏夹

Article Polymer Science

Cavitation and Morphological Changes in Polypropylene Deformed at Elevated Temperatures

Andrzej Pawlak et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)

添加到收藏夹

Article Agricultural Engineering

The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing

Goekay Nemli et al.

BIORESOURCE TECHNOLOGY (2008)

添加到收藏夹

Article Polymer Science

Thermal, mechanical and morphological properties of polypropylene/clay/wood flour nanocomposites

S. Y. Lee et al.

EXPRESS POLYMER LETTERS (2008)

添加到收藏夹

Article Polymer Science

Effect of cavitation on the plastic deformation and failure of isotactic polypropylene

Bing Na et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

Article Polymer Science

Structure and properties of polymer-wood composites based on an aliphatic copolyamide and secondary polyethylenes

Y. Mamunya et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

添加到收藏夹

Article Materials Science, Composites

Maleated wood-fiber/high-density-polyethylene composites: Coupling mechanisms and interfacial characterization

JZ Lu et al.

COMPOSITE INTERFACES (2005)

添加到收藏夹

Article Polymer Science

Thermal stability and flammability of polypropylene/montmorillonite composites

HL Qin et al.

POLYMER DEGRADATION AND STABILITY (2004)

添加到收藏夹

Article Chemistry, Applied

The preparation and characterisation of a series of chemically modified potato starches

JM Fang et al.

CARBOHYDRATE POLYMERS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.