4.7 Article

Agar-based optical sensors for electric current measurements

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Microstructured Optical Fiber Made From Biodegradable and Biocompatible Poly(D,L-Lactic Acid) (PDLLA)

Agnieszka Gierej et al.

Summary: We have prepared and characterized microstructured biodegradable and biocompatible polymer optical fibers using commercially available poly(D,L-lactic acid) (PDLLA). The preparation of preforms by transfer molding and fiber manufacturing was reported and the influence of polymer processing on the molar mass decrease of PDLLA was investigated. The in vitro degradation of the fabricated fibers in phosphate buffered saline (PBS) was studied, showing molar mass loss of 21%, 25%, and 43% over 105 days for fibers with diameters of 400, 200, and 100 μm, respectively. Cutback measurements revealed an attenuation coefficient of 0.065 dB/cm at 898 nm for a microstructured fiber with a diameter of 219 +/- 27 μm. After immersion in PBS at 37 degrees C, the optical loss increased by 0.4 dB/cm at 950 nm after 6 h and by 0.8 dB/cm after 17 h.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2023)

Article Engineering, Environmental

A conductive hydrogel based on nature polymer agar with self-healing ability and stretchability for flexible sensors

Zhen Nie et al.

Summary: In this work, a conductive hydrogel was constructed using dynamic crosslinking between agar and borax, along with hydrogen bonds between agar chains. The introduction of MXene nanosheets further improved the mechanical properties and ionic conductivity of the hydrogel. The assembled flexible sensor with Agar/Borax hydrogel and 0.15 wt% MXene exhibited a wide strain detection range, high sensitivity, and good stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Review Physics, Applied

Silk materials at the convergence of science, sustainability, healthcare, and technology

Giulia Guidetti et al.

Summary: Bombyx mori silk fibroin is a widely used material with unique properties that make it suitable for various applications in fields such as biomedical devices, optics, and electronics. This review discusses the significance and advantages of silk-based devices and provides a roadmap for future developments.

APPLIED PHYSICS REVIEWS (2022)

Article Optics

Optical fiber specklegram sensor for multi-point curvature measurements

Eric Fujiwara et al.

Summary: We present a multi-point curvature sensor based on optical fiber specklegram measurements. The proposed sensor uses an ordinary multimode fiber as a reflection probe and discretizes the waveguide into segments for simplified correlation analyses. The sensor demonstrates high resolution and small errors in curvature measurements.

APPLIED OPTICS (2022)

Article Materials Science, Multidisciplinary

Temperature sensing properties of a Fabry-Perot fiber probe based on agar film

Run Yang et al.

MATERIALS LETTERS (2022)

Article Optics

Oscillating optical fiber speckle patterns: modeling and application

Eric Fujiwara et al.

Summary: The speckle patterns produced by the interference between optical fiber modes contain detailed information about waveguide characteristics. In this study, a reflection-type setup using a fiber coupler and mirror generated oscillating specklegrams that cycled consistently. An analytical model derived from a multimode fiber Fabry-Perot interferometer was used to investigate the effects of cavity length, refractive index, and laser wavelength on the correlation coefficient. Experimental results confirmed that the distance between the fiber and mirror influenced the changes in the specklegrams. Furthermore, the presented system functioned as a precise displacement sensor with a resolution of 3 nm and a linear response range of 70 μm, achieved through an extended correlation algorithm.

OPTICS CONTINUUM (2022)

Article Engineering, Biomedical

Thermally drawn biodegradable fibers with tailored topography for biomedical applications

Syamak Farajikhah et al.

Summary: The study reports a scalable and inexpensive fiber fabrication technique for generating PCL fibers of various geometries with the potential for biomedical applications and tissue engineering. The fibers demonstrate stable optical propagation loss and support cell growth, making them attractive for optical neural interfacing in biomedical applications. The ability to tailor the surface morphology of biodegradable PCL fibers and their non-cytotoxicity enhance their suitability for diverse biomedical applications and tissue engineering.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

Review Chemistry, Analytical

An overview on the recent applications of agarose as a green biopolymer in micro-extraction-based sample preparation techniques

Hadi Tabani et al.

Summary: The introduction of a variety of chemicals in different industrial fields has made sample preparation inevitable for trace analysis. Traditional extraction techniques face challenges such as tedious procedures and hazards to personnel and the environment, leading to the introduction of microextraction techniques. Agarose, as a natural material, has been utilized in solid phase microextraction, micro-solid phase extraction, and liquid phase microextraction techniques, showing advantages such as easy fabrication, adjustability, inertness, and biodegradability.

TALANTA (2021)

Review Chemistry, Physical

Cellulose for Light Manipulation: Methods, Applications, and Prospects

Martin Reimer et al.

Summary: Cellulose, as one of the most abundant biopolymers on earth, is being increasingly recognized for its sustainable and renewable properties. Its derivatives are widely used in optical applications and for manipulating light, making it a potential candidate for replacing fossil-based polymers in optoelectronic devices.

ADVANCED ENERGY MATERIALS (2021)

Review Nanoscience & Nanotechnology

Biodegradable Materials for Sustainable Health Monitoring Devices

Ensieh S. Hosseini et al.

Summary: The recent emergence of biodegradable materials has opened up significant opportunities to revolutionize healthcare technologies with naturally degrading sensors. These systems eliminate the need for extraction or reoperation, reducing chronic inflammatory responses and environmental impact. The discussion also covers the challenges and future prospects of clinical applications of biodegradable sensors, particularly for implantable devices with wireless capabilities.

ACS APPLIED BIO MATERIALS (2021)

Article Optics

Edible lens made of agar

Miyu Nomura et al.

OPTICAL REVIEW (2020)

Review Nanoscience & Nanotechnology

Multifunctional materials for implantable and wearable photonic healthcare devices

Geon-Hui Lee et al.

NATURE REVIEWS MATERIALS (2020)

Article Multidisciplinary Sciences

Agarose-based structured optical fibre

Eric Fujiwara et al.

SCIENTIFIC REPORTS (2020)

Review Chemistry, Multidisciplinary

Biodegradable Materials and Green Processing for Green Electronics

Wenhui Li et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

All-optical, an ultra-thin endoscopic photoacoustic sensor using multi-mode fiber

Nadav Shabairou et al.

Scientific Reports (2020)

Article Multidisciplinary Sciences

Control of the temporal and polarization response of a multimode fiber

Mickael Mounaix et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Light-Guiding Biomaterials for Biomedical Applications

Soroush Shabahang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Applied

Agarose-based biomaterials for tissue engineering

Payam Zarrintaj et al.

CARBOHYDRATE POLYMERS (2018)

Article Neurosciences

Global electromyographic signal characteristics depend on maximal isometric contraction method in the knee extensors

Patrick M. Tomko et al.

JOURNAL OF ELECTROMYOGRAPHY AND KINESIOLOGY (2018)

Article Computer Science, Software Engineering

Edible fiducial marker made of edible retroreflector

Hiromasa Oku et al.

COMPUTERS & GRAPHICS-UK (2018)

Article Optics

Polymer optical fiber specklegram strain sensor with extended dynamic range

Eric Fujiwara et al.

OPTICAL ENGINEERING (2018)

Article Engineering, Electrical & Electronic

Vibration and Magnetic Field Sensing Using a Long-Period Grating

Ivo M. Nascimento et al.

IEEE SENSORS JOURNAL (2017)

Article Engineering, Electrical & Electronic

Electrical Characterization of Glycerin: Water Mixtures: Implications for Use as a Coupling Medium in Microwave Tomography

Paul M. Meaney et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2017)

Article Optics

Light transfer in agar immobilized microalgae cell cultures

Razmig Kandilian et al.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2017)

Article Optics

Spatial beam self-cleaning in multimode fibres

K. Krupa et al.

NATURE PHOTONICS (2017)

Article Engineering, Biomedical

Flexible biodegradable citrate-based polymeric step-index optical fiber

Dingying Shan et al.

BIOMATERIALS (2017)

Article Optics

Agarose coated spherical micro resonator for humidity measurements

Arun Kumar Mallik et al.

OPTICS EXPRESS (2016)

Article Multidisciplinary Sciences

Active dynamics of colloidal particles in time-varying laser speckle patterns

Silvio Bianchi et al.

SCIENTIFIC REPORTS (2016)

Article Chemistry, Multidisciplinary

Step-Index Optical Fiber Made of Biocompatible Hydrogels

Myunghwan Choi et al.

ADVANCED MATERIALS (2015)

Review Biochemical Research Methods

Miniaturized optogenetic neural implants: a review

B. Fan et al.

LAB ON A CHIP (2015)

Article Materials Science, Biomaterials

Comparison of electrical conductivities of various brain phantom gels: Developing a 'brain gel model'

Madhuvanthi A. Kandadai et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)

Review Chemistry, Multidisciplinary

Optical Current Sensors for High Power Systems: A Review

Ricardo M. Silva et al.

APPLIED SCIENCES-BASEL (2012)

Article Materials Science, Biomaterials

NaCl doping and the conductivity of agar phantoms

D. Bennett

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Article Biophysics

On-chip electrical impedance tomography for imaging biological cells

Tao Sun et al.

BIOSENSORS & BIOELECTRONICS (2010)

Article Biotechnology & Applied Microbiology

Facile Fabrication of Gelatin-Based Biopolymeric Optical Waveguides

Amy K. Manocchi et al.

BIOTECHNOLOGY AND BIOENGINEERING (2009)

Article Optics

The copula: a tool for simulating speckle dynamics

Donald D. Duncan et al.

JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION (2008)

Article Multidisciplinary Sciences

Long-term motor cortex plasticity induced by an electronic neural implant

Andrew Jackson et al.

NATURE (2006)

Article Food Science & Technology

Sensory texture related to large-strain rheological properties of agar/glycerol gels as a model food

Lisa M. Barrangou et al.

JOURNAL OF TEXTURE STUDIES (2006)