☆ 4.6 Article

Polypropylene Color Masterbatches Containing Layered Double Hydroxide Modified with Quinacridone and Phthalocyanine Pigments-Rheological, Thermal and Application Properties

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Polypropylene and Graphene Nanocomposites: Effects of Selected 2D-Nanofiller's Plate Sizes on Fundamental Physicochemical Properties

Sarat Chandra Patra et al.

Summary: The authors developed a nanocomposite by using a melt mixing method to combine polypropylene (PP) and graphene nanoplatelets (GNPs). The study found that all three sizes of GNPs could enhance the mechanical strength of the polymer composite. Increasing the size of the nanofiller decreased tensile strength and modulus, increased flexural strength and modulus, and increased impact strength. Graphene improved the crystalline phases and structure of PP, and increased thermal stability.

INVENTIONS (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Injection-Molded Isotactic Polypropylene Colored with Green Transparent and Opaque Pigments

Vaclav Janostik et al.

Summary: This study investigates the effect of transparent/opaque green masterbatches (MBs) and their concentration on the physico-mechanical and optical properties of PP produced by injection molding. The results showed that selected pigments had different nucleating abilities, affecting the dimensional stability and crystallinity of the product. The selection of appropriate pigments for PP should be considered, especially in areas where dimensional and color stability, as well as product safety, are highly important.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Design and Preparation of Antibacterial Polymer Brushes with Phthalocyanine Pigments

Yu Zhou et al.

Summary: To solve the problems of low polarity, poor dispersion in water, and easy agglomeration of phthalocyanine pigments in waterborne coating applications, the pigments were encapsulated with a copolymer and further grafted with an antibacterial polymer. The encapsulation improved the dispersion of the pigments in water and their compatibility with the resin. The grafting of the antibacterial polymer enhanced the antibacterial properties of the pigments.

COATINGS (2023)

添加到收藏夹

Article Materials Science, Composites

Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers

Antonio J. Paleo et al.

Summary: The electrical conductivity and Seebeck coefficient of melt-processed polypropylene composites filled with 5 wt.% of industrial-grade carbon nanofibers (CNFs) were investigated at temperatures from 40 ffiC to 100 ffiC. The structural differences of two types of Pyrograf (R) III CNFs resulted in different effects on the composite materials. The PP/CNF24 composite exhibited higher electrical conductivity and a more negative Seebeck coefficient compared to the PP/CNF19 composite, indicating better thermoelectric properties.

JOURNAL OF COMPOSITES SCIENCE (2023)

添加到收藏夹

Article Construction & Building Technology

Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions

Ellina Bernard et al.

Summary: Experimental observation showed that MgO in cementitious materials precipitates as poorly crystalline hydrotalcite, but the lack of consistent thermodynamic data for hydrotalcite makes geochemical modelling challenging. Synthesizing hydrotalcites with different anions indicated varying levels of crystallinity. The stability of hydrotalcite structure with temperature was found to depend on the incorporated anion.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Review Chemistry, Applied

Recent advances in the nonlinear optical (NLO) properties of phthalocyanines: A review

Mohamed Yahya et al.

Summary: Phthalocyanines are a type of robust macrocycles dyes with high thermal and chemical stability, offering a wide range of applications due to their structural flexibility and ability to incorporate various elements. Tuning specific properties can lead to high-performance materials, making them promising for nonlinear optical applications.

DYES AND PIGMENTS (2022)

添加到收藏夹

Article Polymer Science

The effect of masterbatch pigments on the crystallisation, morphology, and shrinkage behaviour of Isotactic Polypropylene

Jawad Ullah et al.

Summary: Variations in mould shrinkage when using different types of pigments in semicrystalline polymers have been studied. The presence of pigments as nucleating agents affects the crystallisation and subsequently the shrinkage of the polymers. This can lead to interference fit issues between parts and problems in automated equipment. The study showed that masterbatch pigments have an influence on crystallisation and shrinkage behaviour, with red and purple pigments acting as strong nucleating agents and white pigments having less influence.

JOURNAL OF POLYMER RESEARCH (2022)

添加到收藏夹

Article Polymer Science

Effects of Modified Layered Double Hydroxides on the Thermal Degradation and Combustion Behaviors of Intumescent Flame Retardant Polyethylene Nanocomposites

Tiefeng Zhang et al.

Summary: The flame retardant effectiveness of Mg-Al LDH in polyethylene (PE) was improved by introducing 2-carboxy ethyl (phenyl) phosphinic acid (CEPPA) as a flame retardant modifier to prepare CEPPA-intercalated LDH (CLDH), which was then dispersed in PE through melt blending. The compact and fully developed char of the PE/IFR/CLDH composites were mainly attributed to the reactions between CLDH and the intumescent flame retardant (IFR), enhancing the flame retardancy of the composites.

POLYMERS (2022)

添加到收藏夹

Article Materials Science, Composites

Simultaneous attainment of particle dispersion and surface modification of Al2O3nanoparticles via wet-jet milling

Chaofu Zhang et al.

Summary: The good dispersion and chemical modification of alumina nanoparticles as a filler were achieved through a wet-jet milling process, improving their effectiveness in polymeric composites. Optimization of nanoparticle dispersion, chemical modification, and mixing process can enhance the mechanical properties of the Al2O3/epoxy composite.

JOURNAL OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Injection Molded PP Foams Using Food Ingredients for Food Packaging Applications

Artemis Tsagdi et al.

Summary: A new method using food grade foaming agents coated on PP pellets was developed to create PP based foaming materials. Through lab and industrial scale tests, PP articles with significantly increased void fraction and decreased thermal conductivity were successfully produced.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Applied

Suppressing aggregation of quinacridone pigment and improving its color strength by using chitosan nanofibers

Yasuko Saito et al.

Summary: This study investigated the potential of chitin and chitosan nanofibers as dispersants for quinacridone pigments. It was found that chitosan nanofibers adsorbed more quinacridone and inhibited its aggregation, while chitin nanofibers did not have the same effect.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

The inhibiting effect of basalt powder on crystallization behavior and the structure-property relationship of α-nucleated polypropylene composites

Mateusz Barczewski et al.

Summary: The study analyzed the influence of adding different amounts of basalt powder and a sorbitol-based nucleating agent on the structure and properties of polypropylene composites. It was found that the reaction between the two components limited the network formation, but the samples still exhibited good mechanical properties and adhesion between the polymer and the filler.

POLYMER TESTING (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Phthalocyanines: An Old Dog Can Still Have New (Photo)Tricks!

Andrea M. Schmidt et al.

Summary: Phthalocyanines, as exquisite compounds with favorable properties, have seen steady growth in applications, particularly in cutting-edge technologies relying on their great photophysical properties. The spotlight remains on phthalocyanines, with many researchers providing vivid reports on their innovative use in photo-applications.

MOLECULES (2021)

添加到收藏夹

Article Polymer Science

The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites

Mateusz Barczewski et al.

Summary: In this study, thermally expanded vermiculite (TE-VMT) was modified and used as a filler in composites with a polylactide (PLA) matrix. The modification improved dispersion and interfacial adhesion of vermiculite in the matrix, resulting in enhanced impact strength and thermal-mechanical stability of the composites.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of phthalocyanine nanostructure on photovoltaic performance of its polymer composite thin films

A. K. Zeinidenov et al.

Summary: Doping PTB7-Th:ITIC photoactive layer with phthalocyanine nanoribbons can enhance the performance of PEDOT:PSS/PTB7-Th:ITIC:MPc/Al composite organic solar cells, including increase in short-circuit current density, boost in power conversion efficiency, and improvement in charge transport dynamics.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Polymer Science

Nanocomposites Materials of PLA Reinforced with Nanoclays Using a Masterbatch Technology: A Study of the Mechanical Performance and Its Sustainability

Helena Oliver-Ortega et al.

Summary: Packaging accounts for about 40% of total plastic production, and there is a shift towards biopolymers in food packaging due to environmental concerns. Improving barrier properties of Poly (lactic acid) (PLA) for competition with other polymers is being researched, with a focus on dispersion. Pre-dispersion and concentrated compounds show promise in enhancing mechanical performance and sustainability of materials in food trays.

POLYMERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Biochar/polypropylene composites: A study on the effect of pyrolysis temperature on crystallization kinetics, crystalline structure, and thermal stability

Abdulaziz A. Alghyamah et al.

Summary: The study found that biochar particles can act as nucleating agents, accelerating the crystallization rate of polypropylene composites. The thermal stability of BC/PP composites is significantly improved, up to 80 degrees Celsius higher than pure PP samples.

JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

Mechanical, Thermal, and Morphological Properties of Graphene Nanoplatelet-Reinforced Polypropylene Nanocomposites: Effects of Nanofiller Thickness

Harekrushna Sutar et al.

Summary: The mechanical properties of polypropylene (PP) were improved by blending with graphene nanoplatelets (GNPs) of different thicknesses and surface areas, especially in terms of tensile, flexural strength, and Young's modulus. Furthermore, the thickness of GNPs significantly affects the dispersion and agglomeration of the composite material.

JOURNAL OF COMPOSITES SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Organo-modified LDH fillers endowing multi-functionality to bio-based poly (butylene succinate): An extended study from the laboratory to possible market

Adam A. Marek et al.

APPLIED CLAY SCIENCE (2020)

添加到收藏夹

Review Crystallography

Morphology, Thermal Stability, and Flammability Properties of Polymer-Layered Double Hydroxide (LDH) Nanocomposites: A Review

Mokgaotsa Jonas Mochane et al.

CRYSTALS (2020)

添加到收藏夹

Article Chemistry, Physical

Pigmentation and Degradative Activity of TiO2on Polyethylene Films Using Masterbatches Fabricated Using Variable-Frequency Ultrasound-Assisted Melt-Extrusion

Christian J. Cabello-Alvarado et al.

MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Characterization and properties of new color-tunable hybrid pigments based on layered double hydroxides (LDH) and 1,2-dihydroxyanthraquinone dye

Anna Marzec et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

High temperature-stability of organic thin-film transistors based on quinacridone pigments

Yasin Kanbur et al.

ORGANIC ELECTRONICS (2019)

添加到收藏夹

Article Chemistry, Applied

Synthesis and application of novel dispersant using a dichlorotriazine azo moiety and Dodecan-1-ol

Christiana Agbo et al.

PROGRESS IN ORGANIC COATINGS (2019)

添加到收藏夹

Article Polymer Science

Methodology for determining selected characteristics of polyethylene dyeing using CIELab system

Mateusz Chorobinski et al.

POLIMERY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Ball milling: a green technology for the preparation and functionalisation of nanocellulose derivatives

Carmen C. Piras et al.

NANOSCALE ADVANCES (2019)

添加到收藏夹

Article Engineering, Chemical

Effect of filler load and high-energy ball milling process on properties of plasticized wheat gluten/olive pomace biocomposite

Asma Boudria et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Polymer Science

Fluorescent LDPE and PLA nanocomposites containing fluorescein-modified layered double hydroxides and their ON/OFF responsive behavior towards humidity

Serena Coiai et al.

EUROPEAN POLYMER JOURNAL (2018)

添加到收藏夹

Article Polymer Science

Thermal, thermo-oxidative and thermomechanical degradation of PLA: A comparative study based on rheological, chemical and thermal properties

A. A. Cuadri et al.

POLYMER DEGRADATION AND STABILITY (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Optimization of the preparation process of biodegradable masterbatches and characterization of their rheological and application properties

Chen-yao Chen et al.

POLYMER TESTING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phthalocyanine green aluminum pigment prepared by inorganic acid radical/radical polymerization for waterborne textile applications

Benjamin Tawiah et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY (2017)

添加到收藏夹

Article Chemistry, Physical

Adsorption capability for anionic dyes on 2-hydroxyethylammonium acetate-intercalated layered double hydroxide

Ran Bu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

添加到收藏夹

Article Polymer Science

Isotactic polypropylene modified with sorbitol-based derivative and siloxane-silsesquioxane resin

Monika Dobrzynska-Mizera et al.

EUROPEAN POLYMER JOURNAL (2016)

添加到收藏夹

Article Mechanics

Rheology of compatibilized immiscible blends with droplet-matrix and cocontinuous morphologies during coarsening

Carlos R. Lopez-Barron et al.

JOURNAL OF RHEOLOGY (2014)

添加到收藏夹

Article Thermodynamics

The thermal properties and the flammability of pigmented elastomeric materials

Agnieszka Pajak et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

添加到收藏夹

Article Polymer Science

Stabilization of polypropylene using dye modified layered double hydroxides

Burak Kutlu et al.

POLYMER DEGRADATION AND STABILITY (2014)

添加到收藏夹

Article Chemistry, Physical

Polypropylene/layered double hydroxide nanocomposites

Qiang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

添加到收藏夹

Article Chemistry, Physical

Effect of adsorbed/intercalated anionic dyes into the mechanical properties of PVA: Layered zinc hydroxide nitrate nanocomposites

Rafael Marangoni et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)

添加到收藏夹

Article Polymer Science

On Continuous Relaxation Spectrum. Method of Calculation

A. Ya. Malkin et al.

POLYMER SCIENCE SERIES A (2010)

添加到收藏夹

Article Chemistry, Physical

Organic inorganic dye filler for polymer:: Blue-coloured layered double hydroxides into polystyrene

Rafael Marangoni et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation and characterization of dye-intercalated Zn-Al-layered double hydroxide and its surface modification by silica coating

Sung-Ho Hwang et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2008)

添加到收藏夹

Article Chemistry, Applied

The influence of additives on the structure of polypropylene fibres

Jan Broda et al.

DYES AND PIGMENTS (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystal structures of quinacridones

Erich F. Paulus et al.

CRYSTENGCOMM (2007)

添加到收藏夹

Article Polymer Science

Structure of polypropylene fibres coloured with a mixture of pigments with different nucleating ability

J Broda

POLYMER (2003)

添加到收藏夹

Article Polymer Science

Influence of pigments on super-molecular structure of polypropylene fibres

J Broda et al.

EUROPEAN POLYMER JOURNAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.