☆ 4.6 Article

Vibration Analysis and Damping Effect of Blade-Hard Coating Composite Structure Based on Base Excitation

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

Dongxu Du et al.

Summary: This study develops discontinuous arc connections with different connecting stiffness to simulate actual mistuning connections. The dynamic model of rotational mistuning-connecting disk-drum coupling structures is derived and verified. The mistuning connections induce changes in mode order, frequency division, and vibration localization. Mistuning also affects the key information in Campbell diagrams.

APPLIED MATHEMATICAL MODELLING (2023)

添加到收藏夹

Article Engineering, Mechanical

Single-sensor-based dynamic response reconstruction of blades under base excitation

Kai Zhou et al.

Summary: This paper proposes a method to reconstruct the dynamic response of blades under base excitation by measuring the dynamic response. The method includes two steps, which are divided into single-frequency response components using empirical mode decomposition and combining the time-domain and frequency-domain response transmissibility matrices. The results of the study demonstrate the feasibility of the response reconstruction method for blades under base excitation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Fatigue crack retardation by the application of hard damping coating to blades under resonance

Qing-yu Zhu et al.

Summary: This paper proposes a hard damping coating via atmospheric plasma spraying (APS) method to inhibit crack propagation of blade specimens. Fatigue tests show that the hard damping coating has the ability to retard crack growth. A finite element (FE) model of standard blade specimens with breathing crack is established and verified, and the crack propagation model is introduced. The effects of coating thickness, elastic modulus, and density on crack growth are discussed, as well as the influence of coating treatment on crack propagation in different stages.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2023)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear vibration analysis of coated blisks in the presence of stiffness mistuning identification

Xianfei Yan et al.

Summary: This paper explores the modelling methods of coated blisks and validates the linear and nonlinear ROMs through experimental tests. Additionally, it analyzes the impact of nonlinear strain dependence characteristics on the forced responses of coated blisks with different loss factor substrate.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Detection of blade substrate crack parameters of hard-coated blisk based on mistuning identification technology

Kunpeng Xu et al.

Summary: This study presents a novel method to detect the parameters of blade substrate cracks in hard-coated blisks, utilizing mistuning identification technique and finite element simulation to establish basic data sets. The method proves to effectively detect crack parameters for all blades with high efficiency, showing higher accuracy in crack location detection than crack size detection. The proposed method exhibits good and stable identification accuracy for cracks within a specific size and location range.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Vibration Reduction Characteristics and Vibration Control of Aviation Hydraulic Pipeline by Hard Coating

Zhining Cui et al.

Summary: Aviation hydraulic pipelines are prone to fatigue damage failure due to long-term exposure to complex vibration environments, posing a threat to aircraft safety. This study proposes the use of hard coatings as a new vibration reduction method. Through modeling, finite element analysis, and experimental research, the optimal solution is obtained, and it is proven that the hard coating can meet the demands of vibration control in practical engineering.

COATINGS (2022)

添加到收藏夹

Article Acoustics

Vibration prediction of rotating composite fan blades comprising viscoelastic damping treatments

Lucie Rouleau et al.

Summary: A numerical tool has been developed to predict the structural damping of dynamic rotating composite fan blades with constrained viscoelastic patches under varying temperature and rotation speed. This study will help quantify the influence of temperature and rotation speed on the efficiency of passive damping treatment and contribute to the design of higher performing blades.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Chemistry, Physical

A hard yet tough CrAlSiN nanocomposite coating for blades deposited by filtered cathode vacuum arc

Y. F. Zhang et al.

Summary: The CrAlSiN nanocomposite coatings prepared in the study exhibited high hardness and toughness, with refined grain size and well-defined nanocrystalline/amorphous phase separation.

SURFACES AND INTERFACES (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Damage evolution behavior of TiN/Ti multilayer coatings under high-speed impact conditions

Zhanwei Yuan et al.

Summary: This study evaluated the mechanical properties and erosion resistance of TiN monolayer and TiN/Ti multilayer coatings. The multilayer coatings exhibited better erosion resistance due to the plastic deformation of the Ti layer dissipating impact energy and inhibiting crack propagation at the interfaces.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Experimental investigation on fatigue of blade specimen subjected to resonance and effect of a damping hard coating treatment

Chen Yu-gang et al.

Summary: This paper presents experimental results of fatigue behavior of compressor blade specimen subjected to resonance, along with the effects of a damping hard coating on relieving fatigue progress. Significant nonlinear features were observed in the spectrum of the blade with a fatigue crack, and a finite element model was established to simulate the vibration behavior of the cracked blade. Depositing a NiCrAlY coating on the blade was shown to increase its fatigue life in the experiments.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

添加到收藏夹

Article Engineering, Aerospace

Control of mistuning level using hard coating for blisks based on mistuning identification technique

Kunpeng Xu et al.

Summary: A novel control method using hard coating is proposed to control the mistuning level of blisks, where the thickness of the hard coating is designed according to the mistuning state of blisk substrate. The method effectively reduces vibration localization and controls mistuning levels in the designed coated blisks.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Topology Optimization of Hard-Coating Thin Plate for Maximizing Modal Loss Factors

Haitao Luo et al.

Summary: Hard coating structures are widely studied as a new passive damping method. Local coverage can achieve better vibration reduction effect and save material costs. The proposed topology optimization method for hard coated composite plates aims to maximize modal loss factors, with numerical examples demonstrating its effectiveness.

COATINGS (2021)

添加到收藏夹

Article Acoustics

Identification and influence factors analysis of blade crack mistuning in hard-coated blisk based on modified component mode mistuning reduced-order model

Kunpeng Xu et al.

Summary: Blade cracks in hard-coated blisks can lead to severe mistuning and vibration localization. A mistuning identification method based on a modified component mode mistuning reduced-order model is proposed to identify crack mistuning and analyze factors such as crack location, length, radial position, and modal data type influencing mistuning. The results show that crack length affects mistuning, with crack position and modal data type also impacting mistuning significantly.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2021)

添加到收藏夹

Article Acoustics

A new finite element model for vibration analysis of a coated blisk with variable coating thickness

Xianfei Yan et al.

Summary: A new laminated element is developed in this paper to address the issue of changing coating thickness in the damping design of blisks with hard coating. By introducing additional virtual layers to simulate the variations of coating thickness, the inconvenience of regenerating node coordinates is avoided.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2021)

添加到收藏夹

Article Engineering, Aerospace

Vibration characteristics of rotating pretwisted composite tapered blade with graphene coating layers

W. Zhang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear finite element modeling and vibration analysis of the blisk deposited strain-dependent hard coating

Feng Gao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Aerospace

A nonlinear analytical formula for forced vibration analysis of the hard-coating cylindrical shell based on the strain energy density principle

Yue Zhang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Aerospace

The equivalent modeling of hard-coating blisk based on mistuning identification

Kunpeng Xu et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Mechanics

Optimal design of the hard-coating blisk using nonlinear dynamic analysis and multi-objective genetic algorithm

Feng Gao et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theoretical Study on the Influence of Hard Coating on Vibration Characteristics of Fiber-Reinforced Composite Thin Shell

Hui Li et al.

COATINGS (2018)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear vibration analysis of a hard-coating cylindrical shell with elastic constraints by finite element method

Yue Zhang et al.

NONLINEAR DYNAMICS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reduced-Order Modeling for and Vibration Characteristics Analysis of a Hard-Coated Mistuned Blisk

Feng Gao et al.

COATINGS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Vibration Characteristics and Damping Analysis of the Blisk-Deposited Hard Coating Using the Rayleigh-Ritz Method

Feng Gao et al.

COATINGS (2017)

添加到收藏夹

Article Engineering, Aerospace

Vibration and damping analysis of the bladed disk with damping hard coating on blades

Yugang Chen et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Acoustics

Frequency-based structural modification for the case of base excitation

Martin Cesnik et al.

JOURNAL OF SOUND AND VIBRATION (2013)

添加到收藏夹

Article Engineering, Civil

Response of vibration-isolated object to ground motions with intense vertical accelerations

Yoshikazu Araki et al.

ENGINEERING STRUCTURES (2011)

添加到收藏夹

Article Mechanics

Dynamic instability of a circular cylindrical shell carrying a top mass under base excitation: Experiments and theory

Francesco Pellicano

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

添加到收藏夹

Article Mechanics

Determination of mechanical properties of non-linear coatings from measurements with coated beams

Peter J. Torvik

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

添加到收藏夹

Article Acoustics

The evaluation of the damping characteristics of a hard coating on titanium

Christopher Blackwell et al.

SHOCK AND VIBRATION (2007)

添加到收藏夹

Article Materials Science, Ceramics

Study of the amplitude-dependent mechanical behaviour of yttria-stabilised zirconia thermal barrier coatings

N. Tassini et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ceramic coatings: A phenomenological modeling for damping behavior related to microstructural features

N. Tassini et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Mechanics

Damping efficiency of the coating structure

LM Yu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.