☆ 4.6 Article

FEM Simulations of Fatigue Crack Initiation in the Oligocrystalline Microstructure of Stents

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Cycle Number Estimation Method on Fatigue Crack Initiation using Voronoi Tessellation and the Tanaka Mura Model

M. R. A. Rahim et al.

Summary: This paper investigates the short crack initiation of 9Cr-1Mo material under cyclic loading at different temperatures and estimates the short crack initiation Wohler (S/N) Curve. The influence of microstructures on crack initiation is analyzed to derive their initiation curves. A representative microstructural model is generated using the Voronoi tessellation method and the non-uniform stress distribution is calculated by Finite Element Method. The number of cycles needed for crack initiation is estimated based on the stress distribution in the microstructural model using the Tanaka-Mura model. The research demonstrates that the number of cycles required for crack initiation is significantly higher at room temperature compared to elevated temperatures.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Yet Another Approach to Fatigue Crack Growth Simulation

Peter Zobec et al.

Summary: The analysis of a material under variable loads is a complex subject, typically addressed separately by fatigue and fracture mechanics. In this study, we attempt to extend the applicability of the conventional fatigue approach (strain-life) to include fracture. This is achieved by introducing a zero thickness cohesive contact element coupled with a damage parameter derived from material observations of strain controlled fatigue experiments. The presented simulation framework demonstrates predictable crack growth direction on a compact tension specimen, although further experimentation is needed to validate the proposed approach.

METALS (2022)

添加到收藏夹

Article Mechanics

Modeling of Contact Fatigue Damage Accumulation and Wear between Contacting Imperfectly Smooth Surfaces

I. G. Goryacheva et al.

Summary: This paper constructs a model for contact fatigue damage accumulation in an elastic half-space that is in sliding contact with a periodic one-level system of rigid spherical asperities. The research indicates that the damage accumulation rate, the thickness of the most damaged layer, and the delamination wear kinetics of the elastic body are influenced by the roughness density and nominal pressure.

PHYSICAL MESOMECHANICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fatigue Crack Propagation Study of Bridge Steel Q345qD Based on XFEM Considering the Influence of the Stress Ratio

Baoya Cao et al.

Summary: This paper studies the influence of stress ratio on the FCP life of steel Q345qD in bridges, deriving an FCP equation based on the energy release rate and validating its adaptability. The study determines material parameters and analyzes the effects of mesh size in numerical simulations, demonstrating the impact of stress ratio on crack growth rate and fatigue life.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct comparison of microstructure-sensitive fatigue crack initiation via crystal plasticity simulations and in situ high-energy X-ray experiments

Veerappan Prithivirajan et al.

Summary: This paper introduces a methodology to validate the location of microstructure-sensitive fatigue crack initiation as predicted by crystal plasticity finite element simulations using high-energy X-ray diffraction and tomography experiments. The results show an unambiguous one-to-one correlation between the location of failure predicted using extreme values of failure metrics and the experimentally observed location of crack-initiation for models with statistical twin instantiations.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Multidisciplinary Sciences

An assessment of phase field fracture: crack initiation and growth

Philip K. Kristensen et al.

Summary: The phase field fracture methods, in combination with Griffith's energy balance, have become popular for predicting solid fracture. These methods can accurately predict crack initiation, growth, and propagation stages, in agreement with classical fracture mechanics theory.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Newly Discovered Relation between the Critical Resolved Shear Stress and the Fatigue Endurance Limit for Metallic Materials

Marijo Mlikota et al.

METALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural analysis and fatigue crack initiation modelling of additively manufactured 316L after different heat treatments

Chola Elangeswaran et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Mechanics

BENDING ANALYSIS OF STENTED CORONARY ARTERY: THE INTERACTION BETWEEN STENT AND VESSEL

X. Shen et al.

JOURNAL OF MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Calculation of the Wohler (S-N) curve using a two-scale model

M. Mlikota et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Proceedings Paper Engineering, Marine

A review of fatigue crack propagation modelling techniques using FEM and XFEM

K. Rege et al.

FIRST CONFERENCE OF COMPUTATIONAL METHODS IN OFFSHORE TECHNOLOGY (COTECH2017) (2017)

添加到收藏夹

Article Engineering, Biomedical

Mechanical response of cardiovascular stents under vascular dynamic bending

Jiang Xu et al.

BIOMEDICAL ENGINEERING ONLINE (2016)

添加到收藏夹

Article Engineering, Biomedical

Effects of fatigue on the chemical and mechanical degradation of model stent sub-units

Maureen L. Dreher et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)

添加到收藏夹

Article Engineering, Biomedical

Fatigue of Metallic Stents: From Clinical Evidence to Computational Analysis

F. Auricchio et al.

ANNALS OF BIOMEDICAL ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Finite Element Analysis of Crack Propagation in AlSi7%Mg0.3% Cast Alloys using Macro-and Micro-Scale Levels

Galina Lasko et al.

ADVANCED ENGINEERING MATERIALS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fatigue crack nucleation: Mechanistic modelling across the length scales

F. P. E. Dunne

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic modelling of crack initiation on twin boundaries in α-titanium under external tensile loading along various orientations

H. Wang et al.

PHILOSOPHICAL MAGAZINE LETTERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the numerical investigation of cardiovascular balloon-expandable stent using finite element method

M. Azaouzi et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

添加到收藏夹

Article Engineering, Biomedical

Fatigue life assessment of cardiovascular balloon-expandable stents: A two-scale plasticity-damage model approach

H. A. F. Argente dos Santos et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing

R. Quey et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)

添加到收藏夹

Article Mechanics

Extension of the Tanaka-Mura model for fatigue crack initiation in thermally cut martensitic steels

J. Kramberger et al.

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Engineering, Mechanical

Microstructure-sensitive computational modeling of fatigue crack formation

D. L. McDowell et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Engineering, Mechanical

Numerical simulation of micro-crack initiation of martensitic steel under fatigue loading

Angelika Brueckner-Foit et al.

INTERNATIONAL JOURNAL OF FATIGUE (2006)

添加到收藏夹

Article Biophysics

Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method

WQ Wang et al.

JOURNAL OF BIOMECHANICS (2006)

添加到收藏夹

Article Biophysics

Cardiovascular stent design and vessel stresses: a finite element analysis

C Lally et al.

JOURNAL OF BIOMECHANICS (2005)

添加到收藏夹

Article Engineering, Biomedical

A predictive study of the mechanical behaviour of coronary stents by computer modelling

F Migliavacca et al.

MEDICAL ENGINEERING & PHYSICS (2005)

添加到收藏夹

Article Surgery

Finite element analysis and fatigue of stents

M Perry et al.

MINIMALLY INVASIVE THERAPY & ALLIED TECHNOLOGIES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.