☆ 4.6 Article

Numerical Study of Low-Velocity Impact Response of a Fiber Composite Honeycomb Sandwich Structure

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Study on Dynamic Mechanical Properties of Carbon Fiber-Reinforced Polymer Laminates at Ultra-Low Temperatures

Wenhao Zhao et al.

Summary: This study explores the dynamic mechanical properties and damage evolution of CFRP laminates at ultra-low temperatures using experimental methods, theoretical research, and numerical prediction. Through the establishment of an ultra-low temperature dynamic experimental platform and the Split Hopkinson Pressure Bar (SHPB) device, the dynamic mechanical properties of the laminates were tested, and the damage evolution process was observed. The results show that the compression strength and modulus increase with the strain rate, while they follow a quadratic trend with the decrease in temperature. The damage degree of the dynamic bending sample increases with impact velocity and initially decreases and then increases with temperature decrease. A numerical model based on low-temperature dynamic damage constitutive and interlayer interface damage constitutive was established to predict the dynamic mechanical properties and damage evolution of CFRP laminates at ultra-low temperatures, and the finite element analysis (FEA) results are consistent with the experimental results.

MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Properties of 3D-Printed Porous Poly-ether-ether-ketone (PEEK) Orthopedic Scaffolds

Sudeep Kumar Gummadi et al.

Summary: This study used 3D printing to develop PEEK scaffolds with different pore sizes and investigated their mechanical properties through experiments and finite element analysis. The results showed that the scaffold with a pore size of 300μm exhibited the best compressive yield strength, making it suitable for orthopedic applications.

JOM (2022)

添加到收藏夹

Article Engineering, Aerospace

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/ PEEK and GF/PEEK

Peng Wang et al.

Summary: FDM offers unique advantages in rapid prototyping, with enhanced mechanical properties achieved through the use of fiber reinforcement composites. Research shows that adjusting printing parameters can significantly improve the mechanical properties of printed parts.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Polymer Science

Dynamic Mechanical Behavior of Hierarchical Resin Honeycomb by 3D Printing

Huan Hong et al.

Summary: This paper utilized 3D printing technology to prepare resin honeycomb materials with different levels and studied their mechanical properties. The study revealed that multi-level hierarchical honeycomb (MHH) has better mechanical properties compared to single-level hierarchical honeycomb (SHH). Increasing the hierarchical level of honeycomb can improve the mechanical properties of the materials.

POLYMERS (2021)

添加到收藏夹

Article Engineering, Biomedical

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

Yiqiao Wang et al.

Summary: Design of experiments was used to study the impact of 3D printing parameters on the quality of PEEK parts, with bending and compression tests conducted for quantitative evaluation. Nozzle diameter, nozzle temperature, and printing speed were found to be crucial factors affecting the performance of the printed PEEK samples. Optimal mechanical properties and dimension accuracy were achieved by optimizing the parameter combinations.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Mechanics

Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites

Bowen Wang et al.

Summary: Short basalt fiber reinforced PEEK composites exhibit increased surface roughness, decreased friction coefficient, and the lowest specific wear rate, along with good ultimate tensile strength and elongation at break. Thermal and rheological behaviors of the composites were also investigated to understand the effect of basalt fiber on the crystallization performance and flow abilities of PEEK composites.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Polymer Science

Mechanical performances of hip implant design and fabrication with PEEK composite

Bankole Oladapo et al.

Summary: This research focuses on designing microstructures using poly ether-etherketone (PEEK) and its composites to improve implant compatibility. Porous hip bone implants produced by Fused Deposition Modelling (FDM) mimic natural bone with various lattice structures and excellent properties. The study examines surface treatment and nanostructure to create bioactive PEEK/hydroxyapatite (HAp) composites, which show improved biocompatibility and degradation rates.

POLYMER (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical behavior of sandwich structures with varying core material ? A review

Mathew Alphonse et al.

Summary: This investigation focuses on reviewing the mechanical behavior of sandwich structures made of two metal plates and a core material, analyzing the properties under varying loads to compare individual strength and mechanical characteristics with different alloys and composite materials of same weight. The results aim to demonstrate the potential applications of these sandwich structures in engineering fields, as well as comparing them with properties of sandwich structures using different core materials.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse

Guangyong Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact

Xiaoyu Zhang et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

M. F. Arif et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Crushing of vertex-based hierarchical honeycombs with triangular substructures

Dahai Zhang et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Textiles

Drop-Weight Impact Behaviour of Hybrid Fiber/Epoxy Honeycomb Core Sandwich Composites under Hemi-Spherical Impactor

A. Florence et al.

FIBERS AND POLYMERS (2020)

添加到收藏夹

Article Construction & Building Technology

Experimental investigation on impact and bending properties of a novel dactyl-inspired sandwich honeycomb with carbon fiber

Qigang Han et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Mechanics

Numerical fracture analysis and model validation for disbonded honeycomb core sandwich composites

Arash Farshid et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Civil

Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets

Wentao He et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Recent advances in novel metallic honeycomb structure

Zhonggang Wang

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances

Yunwei Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Study on the impact resistance of honeycomb sandwich structures under low-velocity/heavy mass

Xinwei Xue et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression

Yong Tao et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

A novel two-layer honeycomb sandwich structure absorber with high-performance microwave absorption

Hui Luo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic impact response of aluminum honeycombs filled with Expanded Polypropylene foam

Yanqin Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Impact resistance of Nomex honeycomb sandwich structures with thin fibre reinforced polymer facesheets

Longquan Liu et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches

Vincenzo Crupi et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2018)

添加到收藏夹

Article Automation & Control Systems

Cell geometry effect on in-plane energy absorption of periodic honeycomb structures

F. N. Habib et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Experimental and numerical studies on indentation and perforation characteristics of honeycomb sandwich panels

Guangyong Sun et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

An experimental investigation into the high velocity penetration resistance of CFRP and CFRP/aluminium laminates

Ming-ming Xu et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical performance of honeycomb filled with circular CFRP tubes

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Bio-inspired vs. conventional sandwich beams: A low-velocity repeated impact behavior exploration

S. H. Abo Sabah et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of geometric configurations of corrugated cores on the local impact and planar compression of sandwich panels

Yu Rong et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations

Guangyong Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Dynamic bending responses of CFRP thin-walled square beams filled with aluminum honeycomb

Yong Xiao et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Low-velocity impact response of E-glass reinforced thermoset and thermoplastic based sandwich composites

Akar Dogan et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Compressive deformation and energy-absorption capability of aluminium honeycomb core

Ines Ivanez et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical behavior of composited structure filled with tandem honeycombs

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Mechanical

Development of numerical realistic model for predicting low-velocity impact response of aluminium honeycomb sandwich structures

Recep Gunes et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theoretical assessment methodology on axial compressed hexagonal honeycomb's energy absorption capability

Zhonggang Wang et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Axial crushing behaviour of honeycomb-filled square carbon fibre reinforced plastic (CFRP) tubes

Rafea Dakhil Hussein et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Crush response of CFRP square tube filled with aluminum honeycomb

Qiang Liu et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Mechanics

In-plane stiffness of the anisotropic multifunctional hierarchical honeycombs

Yongtao Sun et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

The flatwise compressive properties of Nomex honeycomb core with debonding imperfections in the double cell wall

Longquan Liu et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

EFFECT OF CORE THICKNESS AND INTERMEDIATE LAYERS ON MECHANICAL PROPERTIES OF POLYPROPYLENE HONEYCOMB MULTI-LAYER SANDWICH STRUCTURES

J. Arbaoui et al.

ARCHIVES OF METALLURGY AND MATERIALS (2014)

添加到收藏夹

Article Mechanics

Experimental study on the low velocity impact responses of all-composite pyramidal truss core sandwich panel after high temperature exposure

Jiayi Liu et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

The mechanical properties of natural fibre based honeycomb core materials

M. Y. M. Zuhri et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

High-speed axial impact of aluminum honeycomb - Experiments and simulations

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Mechanics

Low-velocity impact failure of aluminium honeycomb sandwich panels

C. C. Foo et al.

COMPOSITE STRUCTURES (2008)

添加到收藏夹

Article Engineering, Chemical

On the effect of counterface material and aqueous environment on the sliding wear of various PEEK compounds

O Jacobs et al.

TRIBOLOGY LETTERS (2005)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites

MS Abu Bakar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.