☆ 4.6 Article

Mesoscopic Simulation of Core-Shell Composite Powder Materials by Selective Laser Melting

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Mesoscopic chemical heterogeneities in laser powder bed fused CoCrMo and Ni mixed powders and their effect on the mechanical properties

Siyuan Wei et al.

Summary: Microstructural heterogeneity and chemical heterogeneity are common in alloys produced through techniques like laser powder bed fusion. Recent studies show that these chemical heterogeneities can be beneficial in adjusting mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

添加到收藏夹

Article Engineering, Chemical

Segregation of 316L stainless steel powder during spreading in selective laser melting based additive manufacturing

Dengzhi Yao et al.

Summary: This paper investigates the segregation of 316L stainless steel powders during spreading and identifies the segregation mechanisms using the discrete element method. The results show that particle size and distribution have an influence on segregation behavior and properties of the powder bed, and increasing blade velocity can weaken the segregation behavior.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

A Numerical Study on the Mesoscopic Characteristics of Ti-6Al-4V by Selective Laser Melting

Xiaohui Ao et al.

Summary: This paper presents a two-stage mesoscopic layer-by-layer simulation framework for the numerical study of selective laser melting (SLM) process. The framework is able to simulate the behaviors of powder laying and laser scanning, and is used to analyze the characteristics of the molten pool in the SLM process.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Core-Shell Particle Reinforcements-A New Trend in the Design and Development of Metal Matrix Composites

Dina Dudina et al.

Summary: This article highlights the recent trend of developing metal matrix composites (MMCs) reinforced with particles of core-shell structure. The core-shell approach allows for strengthening without sacrificing ductility, showing great potential for enhancing the mechanical properties of MMCs.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of machinability of Ti-B-SiCp reinforced Cu hybrid composites in dry turning

Serhat Sap et al.

Summary: Metal matrix composites (MMCs) are widely used due to their high specific strength, but their machinability presents challenges. The machinability of Cu composites reinforced with Ti-B-SiC powder particles at different ratios was studied, and the effects of cutting parameters on surface roughness, flank wear, and cutting temperature were investigated.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dispersion of reinforcing micro-particles in the powder b e d fusion additive manufacturing of metal matrix composites

Yanming Zhang et al.

Summary: In this study, a high-fidelity model is proposed to reveal the dynamics of molten pool and reinforcing solid particles in the additive manufacturing process of metal matrix composites. The results demonstrate the significant roles of interface effect and reinforcing solid particles in the dynamics of the process. The study shows that the layer-wise deposition scheme can achieve uniform dispersion of reinforcing solid particles in the metal matrix.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical Simulation in the Melt Pool Evolution of Laser Powder Bed Fusion Process for Ti6Al4V

Yixuan Xu et al.

Summary: A physical model is developed in this study using the VOF method to track the free interface of the melt pool and understand its evolution. The simulation results show that process parameters such as laser power and scanning speed have significant effects on the fluid flow and surface morphology in the melt pool.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical and experimental study of molten pool behaviour and defect formation in multi-material and functionally graded materials laser powder bed fusion

Heng Gu et al.

Summary: A DEM-CFD model was established to understand the forming mechanisms of defects in LPBF of multi-material and FGM, leading to the discovery of causes for various defects and optimization of process parameters for defect-free FGM structures.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Physics, Applied

Mechanisms of laser energy absorption and melting behavior during selective laser melting of titanium-matrix composite: role of ceramic addition

Qing Ge et al.

Summary: This study investigated the influence of ceramic addition on the laser energy absorption and powder melting behaviors during SLM of TiC/Ti6Al4V composites using mesoscopic simulation. The results showed that the addition of TiC particles increased the packing density of composite powder and decreased hall velocity, leading to enhanced laser-powder interactions and improved overall laser absorptivity. Excessive addition of ceramics resulted in deteriorated surface morphology of the melted track due to the high required energy for complete melted TiC and elevated difficulty of completely wetting unmelted particles.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mesoscopic study of thermal behavior, fluid dynamics and surface morphology during selective laser melting of Ti-based composites

Donghua Dai et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Photovoltaic solar cell technologies: analysing the state of the art

Pabitra K. Nayak et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Article Thermodynamics

Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF

Mohamad Bayat et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Numerical simulation of the impact of laying powder on selective laser melting single-pass formation

Liu Cao

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing

Xingwang Bai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Engineering, Industrial

Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation

Yu-Che Wu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Denudation of metal powder layers in laser powder bed fusion processes

Manyalibo J. Matthews et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones

Saad A. Khairallah et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Engineering, Manufacturing

Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites

Donghua Dai et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms

Mujian Xia et al.

SCIENCE BULLETIN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites

Pengpeng Yuan et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

A complete model of keyhole and melt pool dynamics to analyze instabilities and collapse during laser welding

Mickael Courtois et al.

JOURNAL OF LASER APPLICATIONS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert

Nilrudra Mandal et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)

添加到收藏夹

Article Engineering, Mechanical

Statistical Analysis of Acoustic Emission Signals Generated During Turning of a Metal Matrix Composite

C. K. Mukhopadhyay et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive Equation and Processing Map for Hot Deformation of SiC Particles Reinforced Metal Matrix Composites

Peng Zhang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)

添加到收藏夹

Review Engineering, Biomedical

Ceramics as biomaterials for dental restoration

Wolfram Hoeland et al.

EXPERT REVIEW OF MEDICAL DEVICES (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

In situ formation of a TiN/Ti metal matrix composite gradient coating on NiTi by laser cladding and nitriding

HC Man et al.

SURFACE & COATINGS TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Composites

Metal matrix composites - From science to technological significance

DB Miracle

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Review Materials Science, Multidisciplinary

Production of tungsten-cobalt cemented carbides

V Bondarenko et al.

MATERIALS TECHNOLOGY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.