☆ 4.6 Article

Stability Analysis of Shear Deformable Inhomogeneous Nanocomposite Cylindrical Shells under Hydrostatic Pressure in Thermal Environment

Materials (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Thermoelastic stability of thin CNT-reinforced composite cylindrical panels with elastically restrained edges under nonuniform in-plane temperature distribution

Le Thi Nhu Trang et al.

Summary: This paper investigates the nonlinear thermoelastic stability of nanocomposite curved panels under nonuniform temperature distribution. The results show that thermal instability can occur in cylindrical panels under sinusoidal temperature distribution, and the load carrying capacity is the weakest for an intermediate value of CNT volume fraction.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermoelastic stability of CNT patterned conical shells under thermal loading in the framework of shear deformation theory

M. Avey et al.

Summary: This study investigates the thermoelastic stability of carbon nanotube (CNT) patterned composite conical shells using the shear deformation theory (ST). Two different boundary value problems are considered, depending on whether material properties are temperature independent or dependent. The study derives the basic equations for CNT patterned truncated conical shells using the modified Donnell-type shell theory and applies the Galerkin method to find the critical temperature and critical axial load expressions. The effects of CNT patterns, volume fraction, radius-to-thickness and length-to-thickness ratios, as well as the half-peak angle on critical parameters within the ST are estimated by comparison with classical shell theory (CT).

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

Mathematical modeling and solution of nonlinear vibration problem of laminated plates with CNT originating layers interacting with two-parameter elastic foundation

M. Avey et al.

Summary: In this study, the first-order shear deformation plate theory (FOPT) proposed by Ambartsumyan is extended to heterogeneous laminated nanocomposite plates and the nonlinear vibration problem. An elastic medium is considered for the first time, using the Pasternak-type elastic foundation model (PT-EF). The mathematical models of laminated rectangular plates with CNT originating layers on the PT-EF are created, and the large amplitude stress-strain relationships and motion equations are derived within FOPT. By applying Galerkin's method, the derived equations are reduced to a nonlinear ordinary differential equation (NL-ODE) for laminated rectangular plates composed of nanocomposite layers. The NL-ODE is solved by the semi-inverse method, and the nonlinear frequency-amplitude relationship is established for the laminated plates resting on the PT-EF within FOPT for the first time. From these relations, similar relations for unconstrained laminated and monolayer CNT patterns plates can be obtained.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2023)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

A Review of Available Theories and Methodologies for the Analysis of Nano Isotropic, Nano Functionally Graded, and CNT Reinforced Nanocomposite Structures

Aman Garg et al.

Summary: This article reviews the research on vibration, static and buckling analysis of nano sandwich, nano FG, and carbon nanotube reinforced nanocomposite plates, beams, and shells, highlighting the theories and methodologies adopted. The discussion includes size-dependent and size-independent theories, as well as hygrothermal-based analysis of nanostructures, categorizing the review based on materials used and theory-based grouping of research. Critical discussions are conducted for each material type, with outlooks for future studies.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Civil

Nonlinear thermo-mechanical static analysis of toroidal shells made of nanocomposite/fiber reinforced composite plies surrounded by elastic medium

Mohammad Amin Shahmohammadi et al.

Summary: This article evaluates the geometrical nonlinear behavior of toroidal shell segments under axial edge-loading and external pressure surrounded by an elastic medium, taking into account thermal effects. The article proposes an analytical solution using the Galerkin method based on the first-order shear deformation theory. The proposed method provides a robust tool for the geometrical nonlinear static analysis of hybrid composite shells with no computational efforts and is simpler than previous formulations. Verification procedures and parametric studies demonstrate the effectiveness of the proposed method for nonlinear analysis of such shells.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Post-buckling analysis of GPLs reinforced porous cylindrical shells under axial compression and hydrostatic pressure

Guangxin Sun et al.

Summary: In this study, the post-buckling behavior of composite porous cylindrical shells under axial compression and hydrostatic pressure is investigated using the moderately thick shell theory. The accuracy of the solutions is validated by comparing them with existing theoretical and experimental data. The study reveals that the geometry and material properties significantly affect the post-buckling behavior and knockdown factor of the cylindrical shell, and also explains and discusses the discrepancies between the classical thin-walled shell theory and the moderately thick shell theory.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mathematics

Mathematical Modeling and Analytical Solution of Thermoelastic Stability Problem of Functionally Graded Nanocomposite Cylinders within Different Theories

Mahmure Avey et al.

Summary: This study aims to mathematically model the thermoelastic stability of cylindrical shells reinforced with carbon nanotubes (CNTs) and evaluate the effects of CNT patterns, volume fraction, and geometric parameters on the critical temperature by comparing with classical theory.

MATHEMATICS (2022)

添加到收藏夹

Article Chemistry, Physical

Buckling Behavior of Sandwich Cylindrical Shells Covered by Functionally Graded Coatings with Clamped Boundary Conditions under Hydrostatic Pressure

Abdullah H. Sofiyev et al.

Summary: This study presents the first analytical solution to the buckling problem of sandwich shells with functionally graded coatings under different external pressures. The influence of various factors on the hydrostatic buckling pressure is investigated in detail.

MATERIALS (2022)

添加到收藏夹

Review Polymer Science

Advances in polymeric nanocomposites for automotive applications: A review

Vraj Shah et al.

Summary: The relevance of polymer nanocomposites in the automobile industry has been increasing due to their ability to meet the need for lightweight vehicles and reduce fuel consumption and emissions. This review covers the fundamental aspects, synthetic approaches, and applications of polymer nanocomposites in the automotive sector.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Review Polymer Science

Recent Trends in Magnetic Polymer Nanocomposites for Aerospace Applications: A Review

David Romero-Fierro et al.

Summary: Polymer nanocomposites have extensive applications in the aerospace industry, offering advantages such as lightness, high strength, corrosion resistance, and conductivity. They optimize design processes and have the potential to provide safer, faster, and more cost-effective transportation in the future.

POLYMERS (2022)

添加到收藏夹

Article Materials Science, Composites

Thermal buckling and postbuckling of CNT-reinforced composite cylindrical shell surrounded by an elastic medium with tangentially restrained edges

Pham Thanh Hieu et al.

Summary: The buckling and postbuckling behavior of thin composite cylindrical shells reinforced by CNTs under uniform temperature rise were investigated in this article. The study found that volume fraction, distribution type of CNTs, geometrical parameters, degree of tangential edge constraint, buckling mode, and surrounding elastic media all have effects on the buckling temperatures and postbuckling strength.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analytical solution of cross- and angle-ply nano plates with strain gradient theory for linear vibrations and buckling

F. Cornacchia et al.

Summary: The study investigates vibrations and buckling of Kirchhoff nano plates using second-order strain gradient theory. Different boundary conditions, stacking sequences, geometries, and material properties are considered, with numerical simulations discussing the effects of plate aspect ratio and non-local ratio. A comparison with classical analytical solutions is provided for buckling loads and fundamental frequencies whenever possible.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of carbon nanotubes distribution on the buckling of carbon nanotubes/fiber/polymer/metal hybrid laminates cylindrical shell

Ahmad Reza Ghasemi et al.

Summary: This study investigates the buckling of carbon nanotubes reinforced circular cylindrical composite shells under hydrostatic pressure, showing that reinforcing with 5% carbon nanotubes can increase buckling resistance by about 10%. The impact of material type and volume fraction on fiber metal laminates cylinders is also illustrated, with Az91 and Ti6AlV having approximately 15% more effect than Al2024 on buckling resistance.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Review Polymer Science

A review featuring the fundamentals and advancements of polymer/CNT nanocomposite application in aerospace industry

Anila Iqbal et al.

Summary: Carbon nanotubes have wide applications in aerospace industry and nanocomposites based on CNT have advanced properties for use in aircrafts, military crafts, missile and spacecraft. The review aims to study the advancements in aerospace applications of polymer/CNT nanocomposites.

POLYMER BULLETIN (2021)

添加到收藏夹

Article Mechanics

The effect of uncertainty sources on the dynamic instability of CNT-reinforced porous cylindrical shells integrated with piezoelectric layers under electro-mechanical loadings

Majid Khayat et al.

Summary: This study investigates the dynamic stability of sandwich carbon nanotube-reinforced cylindrical shells under pulse axial load. Various factors, such as CNT reinforcement distribution and shell thickness, are considered. Sensitivity analysis is conducted to assess the critical loads of the shells under different sources of uncertainty.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Critical Temperatures for Vibrations and Buckling of Magneto-Electro-Elastic Nonlocal Strain Gradient Plates

Giovanni Tocci Monaco et al.

Summary: This work presents an analytical method for studying the vibrations and buckling behavior of nano-plates in a hygro-thermal environment. Nonlinear von Karman terms and strain gradient nonlocal theory are included in the analysis to consider the effects of nano-scale on magneto-electro-elastic plates, along with critical temperatures for vibrations and buckling problems under hygro-thermal loads.

NANOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bending characteristics of carbon nanotubes: Micropolar elasticity models and molecular dynamics simulations

Razie Izadi et al.

Summary: This study evaluates non-classical continuum parameters for different classes of armchair and zigzag single-walled carbon nanotubes through molecular dynamics simulations, focusing on the scale effect in their flexural behavior. The results indicate that non-classical theories, particularly micropolar theory, provide reasonable outcomes, while the classical Cauchy theory exhibits a significant failure.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Torsional Characteristics of Carbon Nanotubes: Micropolar Elasticity Models and Molecular Dynamics Simulation

Razie Izadi et al.

Summary: The study adopts micropolar theory of elasticity to investigate the mechanical properties of carbon nanotubes and optimize material parameters, with results indicating the suitability of micropolar theory in accounting for scale effects.

NANOMATERIALS (2021)

添加到收藏夹

Article Mathematics

Trigonometric Solution for the Bending Analysis of Magneto-Electro-Elastic Strain Gradient Nonlocal Nanoplates in Hygro-Thermal Environment

Giovanni Tocci Monaco et al.

Summary: A trigonometric approach is developed in this study for investigating smart composite nanoplates using a strain gradient nonlocal procedure. Convergence of the method is reported in terms of displacements and electro-magnetic potentials, with results showing agreement with literature and potential for further developments in this field.

MATHEMATICS (2021)

添加到收藏夹

Article Engineering, Civil

Instability characteristics of damped CNT reinforced laminated shell panels subjected to in-plane excitations and thermal loading

Sumeet Chakraborty et al.

Summary: This study investigates the parametric instability of damped functionally graded carbon nanotube reinforced composite cylindrical panels subjected to periodic excitations and thermal effects. The analysis considers Rayleigh damping, shear deformation theory, geometric nonlinearity, temperature-dependent material properties, transformation methods, and numerical examinations of damping effects on CNTRC shell panels. The study also explores the impact of CNT distribution, volume fraction, curvature effect, thermal environment, and static preloading on the instability responses of the shell panels.

STRUCTURES (2021)

添加到收藏夹

Review Physics, Multidisciplinary

The recent progress of functionally graded CNT reinforced composites and structures

Kim Meow Liew et al.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2020)

添加到收藏夹

Review Engineering, Civil

A review on the mechanics of carbon nanotube strengthened deformable structures

Hossein Bakhshi Khaniki et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Buckling analysis of three-phase CNT/polymer/fiber functionally graded orthotropic plates: Influence of the non-uniform distribution of the oriented fibers on the critical load

Michele Bacciocchi

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review on the Processing and Properties of Polymer Nanocomposites and Nanocoatings and Their Applications in the Packaging, Automotive and Solar Energy Fields

Kerstin Mueller et al.

NANOMATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Buckling analysis of functionally graded carbon nanotube-reinforced curved panels under axial compression and shear

Enrique Garcia-Macias et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Mechanical properties of carbon nanotube/polymer composites

B. Arash et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Postbuckling of nanotube-reinforced composite cylindrical shells under combined axial and radial mechanical loads in thermal environment

Hui-Shen Shen et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Engineering, Mechanical

Classical and refined shell models for the analysis of nano-reinforced structures

S. Brischetto et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of Functionally Graded Carbon Nanotube-Reinforced Aluminum Matrix Composite

Hansang Kwon et al.

ADVANCED ENGINEERING MATERIALS (2011)

添加到收藏夹

Article Mechanics

Postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments, Part II: Pressure-loaded shells

Hui-Shen Shen

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Mechanics

Postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments, Part I: Axially-loaded shells

Hui-Shen Shen

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Mechanics

Postbuckling of pressure-loaded FGM hybrid cylindrical shells in thermal environments

Hui-Shen Shen et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Molecular dynamics simulations of the elastic moduli of polymer-carbon nanotube composites

M Griebel et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)

添加到收藏夹

Article Materials Science, Composites

The stress-strain behavior of polymer-nanotube composites from molecular dynamics simulation

SJV Frankland et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.