☆ 4.6 Article

Surface Roughening of Irradiation-Activated Basalt Fiber through In Situ Growth of SiO2: Effects on Crystallization and Properties of PP Composites

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Synthesizing heat transfer factors on thermal bonding structure of mineral added polypropylene spun-bond

Wei Wei et al.

Summary: Functional additives, such as mineral and inorganic particles, play a significant role in polymer processing by modifying the structure bonding and enhancing heat capacity. This study validated the impact of filler additives on the quality and efficiency of loading and embossing processes.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Bond Behavior of Basalt Fiber Reinforced Polymer Bars in Recycled Coarse Aggregate Concrete

Ahmed Godat et al.

Summary: This study experimentally investigated the bond stress-slip behavior of BFRP bars in recycled coarse aggregate concrete, finding that the bond resistance of BFRP bars in recycled coarse aggregate concrete is comparable to normal aggregate concrete. Theoretical equations from the literature were compared to experimental results, with the equation described by Orangun and colleagues showing an 86% accuracy in predicting the bond resistance for BFRP bars in recycled coarse aggregate concrete. High concrete strength and longer bond length can reduce the pull-out failure of BFRP bars.

SUSTAINABILITY (2022)

添加到收藏夹

Article Mechanics

Rehabilitation of seismic-damaged reinforced concrete beam-column joints with different corrosion rates using basalt fiber-reinforced polymer sheets

Ming Li et al.

Summary: The seismic performance of seismic-damaged corroded RC specimens can be effectively improved through rehabilitation with BFRP sheets, which delay concrete spalling and crushing, as well as the buckling of stirrups. The rehabilitated specimens exhibit better ductile behaviors and significantly enhanced ultimate displacements, final stiffness, and total cumulative energy dissipation.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of basalt fiber on the thermal conductivity and wear resistance of sintered WC-based diamond composites

C. Chen et al.

Summary: This study investigated the thermal conductivity and wear resistance of WC-based diamond composites prepared using WC-based matrix powder, BF, and diamond. The addition of BF significantly reduced the wear resistance, but a moderate amount of BF increased the matrix density and reduced the number of pores. The composite with 1% BF addition exhibited the highest thermal conductivity.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Long-Chain Branched Polypropylene: Effects of Chain Architecture, Melt Structure, Shear Modification, and Solution Treatment on Melt Relaxation Dynamics

Dietrich Gloger et al.

Summary: This study focuses on the shear modification of long-chain branched polypropylene (LCB PP) and investigates the chain architecture, branch content, linear viscoelasticity, and recovery mechanisms in solution. The study reveals that shear modification is not fully reversible due to chain breakage in the high molar mass tail or larger structures not detected by gel permeation chromatography. Shear modification deforms chain conformations, perturbs long-range melt order, and affects the mixing quality between linear and branched chains. In solution, recovery mechanisms involve chain swelling and redistribution of linear and branched chains.

MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

3D printing-enabled self-assembling β-nucleating agent alignment: Structural evolution and mechanical performances

Rui Han et al.

Summary: Achieving good alignment of fillers is crucial for the development of high-performance 3D printed objects. This study investigated the influence of printing speed on the alignment of self-assembling beta-nucleating agent (SANA(beta)) within the isotactic polypropylene (iPP) matrix, as well as the crystalline structure and mechanical properties of the printed samples. The results showed that the alignment of SANA(beta) was enhanced due to the converging nozzle effect, leading to the transformation of the crystal morphology and improved mechanical properties. The aligned SANA(beta) also helped maintain a high beta-crystal content, overcoming the limitations of rapid decrease in beta-crystal for iPP at high printing speeds.

POLYMER (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical properties and microstructure of nano-SiO2 and basalt-fiber-reinforced recycled aggregate concrete

Yuanxun Zheng et al.

Summary: In this study, nano-SiO2 and basalt fiber were used to improve the quality of recycled aggregate concrete. The effects of different contents and lengths of basalt fiber on the mechanical properties of the concrete were analyzed, as well as the micro-composite effect between nano-SiO2 and basalt fiber. The study found that the optimum modified concentration of nano-SiO2 was 2%, and the optimum length and content of basalt fiber were 12 mm and 0.2%, respectively. The addition of basalt fiber significantly increased the compressive strength, splitting tensile strength, and flexural strength of the concrete.

NANOTECHNOLOGY REVIEWS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced mechanical and thermal performance of multiwalled carbon nanotubes-filled polypropylene/natural rubber thermoplastic elastomers

Sharika T. Nair et al.

Summary: The study found that multiwalled carbon nanotubes significantly improved the tensile toughness and impact strength of polypropylene/natural rubber blends, especially at a 5wt% concentration. The toughening effect of MWCNTs was more pronounced in composites with co-continuous morphologies (50PP/50NR) compared to those with matrix-droplet (80PP/20NR) morphologies.

NEW JOURNAL OF CHEMISTRY (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

A critical review on the fused deposition modeling of thermoplastic polymer composites

Pavan Kumar Penumakala et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Review Multidisciplinary Sciences

A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis

Sankar Karuppannan Gopalraj et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Materials Science, Composites

Mechanical and tribological performance of chopped basalt fiber/acrylonitrile-butadiene rubber composites

Yingzhe Li et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Effects of short fiber and pre-tension on the tensile behavior of basalt textile reinforced concrete

Deju Zhu et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Polymer Science

Manipulating crystallization behavior of poly(ethylene oxide) by functionalized nanoparticle inclusion

Weiwei Zhao et al.

POLYMER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue degradation and life prediction of basalt fiber-reinforced polymer composites after saltwater corrosion

Xin Wang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Chemistry, Physical

Basalt fiber modified with lanthanum-ethylenediaminetetraacetic acid as potential reinforcement of cyanate matrix composites

Miaomiao Zhu et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Forestry

Design and mechanical tests of basalt fiber cloth with MAH grafted reinforced bamboo and poplar veneer composite

Hongguang Liu et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)

添加到收藏夹

Article Polymer Science

Rendering polypropylene biocomposites antibacterial through modification with oyster shell powder

Chi-Hui Tsou et al.

POLYMER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Characteristics of Green Composites of Short Kenaf Bast Fiber Reinforced in Cardanol

Zahra Dashtizadeh et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

Hybridization Effects on Charpy Impact Behavior of Basalt/Aramid Fiber Reinforced Hybrid Composite Laminates

Omer Yavuz Bozkurt et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

The effects of silane coupling agents on the mechanical properties of basalt fiber reinforced poly(butylene terephthalate) composites

Cagrialp Arslan et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Nuclear Science & Technology

Electron-beam radiation effects on the structure and properties of polypropylene at low dose rates

Heng-Ti Wang et al.

NUCLEAR SCIENCE AND TECHNIQUES (2018)

添加到收藏夹

Article Engineering, Chemical

Self-Assembly β Nucleating Agent Induced Polymorphic Transition from α-Form Shish Kebab to β-Form Highly Ordered Lamella under Intense Shear Field

Rui Han et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

添加到收藏夹

Review Materials Science, Textiles

A green material from rock: basalt fiber - a review

Hafsa Jamshaid et al.

JOURNAL OF THE TEXTILE INSTITUTE (2016)

添加到收藏夹

Article Agricultural Engineering

Environmental impact assessment of end of life options for flax-MAPP composites

Farida Bensadoun et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites

Norshah Aizat Shuaib et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Materials Science, Composites

Charpy impact behavior of clay/basalt fiber-reinforced polypropylene nanocomposites at various temperatures

Seyed Mohammad Reza Khalili et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

A review on basalt fibre and its composites

V. Fiore et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

A short review on basalt fiber reinforced polymer composites

Vivek Dhand et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of γ irradiation on the properties of basalt fiber reinforced epoxy resin matrix composite

Ran Li et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

添加到收藏夹

Article Engineering, Chemical

Control over β-form hybrid shish-kebab crystals in polypropylene pipe via coupled effect of self-assembly β nucleating agent and rotation extrusion

Rui Han et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2015)

添加到收藏夹

Article Mechanics

Mechanical Properties of Basalt-fiber-reinforced Polyamide-6/Polypropylene Composites

Z. F. Zhang et al.

MECHANICS OF COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Polymer Science

Nucleation and growth behavior of β-nucleated iPP during shear induced crystallization investigated by in-situ synchrotron WAXS and SAXS

J. Chen et al.

POLYMER (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Critical formation conditions for beta-form hybrid shish-kebab and its structural analysis

Rui Han et al.

RSC ADVANCES (2014)

添加到收藏夹

Article Polymer Science

Effect of Silane Treatment on Mechanical Properties of Basalt Fiber/Polylactic Acid Ecofriendly Composites

Denni Kurniawan et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2013)

添加到收藏夹

Article Chemistry, Physical

Enhancement of the Mechanical Properties of Basalt Fiber-Wood-Plastic Composites via Maleic Anhydride Grafted High-Density Polyethylene (MAPE) Addition

Jinxiang Chen et al.

MATERIALS (2013)

添加到收藏夹

Article Materials Science, Textiles

The Characterization of Polyacrylonitrile Fibers Stabilized by Electron Beam Irradiation

Hye Kyoung Shin et al.

FIBERS AND POLYMERS (2012)

添加到收藏夹

Article Engineering, Manufacturing

Surface modification and characterization of basalt fibers with hybrid sizings

Bin Wei et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Materials Science, Composites

Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites:: Mechanical properties and acoustic emission study

T. Czigany

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Polymer Science

Impact fracture behavior of clay-reinforced polypropylene nanocomposites

Q. Yuan et al.

POLYMER (2006)

添加到收藏夹

Article Materials Science, Composites

Investigation of basalt fiber composite mechanical properties for applications in transportation

Q Liu et al.

POLYMER COMPOSITES (2006)

添加到收藏夹

Article Engineering, Manufacturing

Recycling technologies for thermoset composite materials - current status

S. J. Pickering

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of short flax fibre bundle/polypropylene composites:: Influence of matrix/fibre modification, fibre content, water uptake and recycling

A Arbelaiz et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Article Polymer Science

Kinetics-controlled compatibilization of immiscible polypropylene/polystyrene blends using nano-SiO2 particles

Q Zhang et al.

POLYMER (2004)

添加到收藏夹

Article Polymer Science

Nonisothermal crystallization of PP/nano-SiO2 composites

JS Qian et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

Article Polymer Science

Thermal degradation of flax and jute fibers

J Gassan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.