4.8 Article

Resonant perovskite solar cells with extended band edge

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Multidisciplinary Sciences

Controlled growth of perovskite layers with volatile alkylammonium chlorides

Jaewang Park et al.

Summary: Controlling the crystallinity and surface morphology of perovskite layers is crucial for achieving high-efficiency perovskite solar cells. By adding alkylammonium chlorides (RACl) to a-formamidinium lead iodide (FAPbI(3)), the crystallization process and surface morphology of the perovskite thin films can be controlled. The resulting perovskite thin layers facilitate the fabrication of perovskite solar cells with a high power-conversion efficiency of 26.08%.

NATURE (2023)

Article Chemistry, Multidisciplinary

Synergistic Effects of Multifunctional Lanthanides Doped CsPbBrCl2 Quantum Dots for Efficient and Stable MAPbI3 Perovskite Solar Cells

Xinmeng Zhuang et al.

Summary: This study introduces lanthanide-doped CsPbBrCl2 PQDs into PSCs for the first time, demonstrating the synergistic effect of composition engineering and defect engineering. The introduction of CsPbBrCl2:Ln(3+) improves the crystallinity and passivates the defects in the MAPbI(3) layer, resulting in enhanced performance of PSCs.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Article Chemistry, Multidisciplinary

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

Shan Tan et al.

Summary: The study demonstrates that phenyltrimethylammonium iodide (PTAI) and its corresponding low-dimensional perovskites exhibit excellent thermal stability and effectively suppress non-radiative recombination of CsPbI3, resulting in improved efficiency and stability of PSCs.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Multidisciplinary Sciences

Stability-limiting heterointerfaces of perovskite photovoltaics

Shaun Tan et al.

Summary: Optoelectronic devices rely on heterointerfaces between different semiconducting materials, and the energy-level alignment between them plays a crucial role in device performance. Surface treatments for perovskite solar cells can impact the energetics of the heterointerface, potentially affecting device stability. Balancing the pros and cons of surface treatments is essential for improving PSC stability.

NATURE (2022)

Review Multidisciplinary Sciences

Rethinking the A cation in halide perovskites

Jin-Wook Lee et al.

Summary: The A cation in ABX(3) organic-inorganic lead halide perovskites (OLHPs) was conventionally believed to hardly affect their optoelectronic properties. However, recent developments have revealed the critical role of the A cation in regulating the physicochemical and optoelectronic properties of OLHPs.

SCIENCE (2022)

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Editorial Material Multidisciplinary Sciences

Absorbing light using time-reversed lasers

Jacopo Bertolotti

SCIENCE (2022)

Article Chemistry, Multidisciplinary

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

Shan Tan et al.

Summary: The study revealed that phenyltrimethylammonium iodide (PTAI) and its corresponding LD perovskites demonstrate excellent thermal stability. Further investigation showed that PTAI-based LD perovskites are mainly distributed at grain boundaries, enhancing the phase stability of CsPbI3 and suppressing non-radiative recombination. As a result, the champion PSC device based on CsPbI3 achieved a record efficiency of 21.0% with high stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Multidisciplinary Sciences

How antisolvent miscibility affects perovskite film wrinkling and photovoltaic properties

Seul-Gi Kim et al.

Summary: The microscopic morphologies of perovskite films strongly influence the density, lifetime, mobility, and trap states of charge carriers, thus impacting the photovoltaic performance. By controlling the geometry of micro-wrinkles in perovskite layers, photocarrier transport performances can be enhanced. The study demonstrates that the wrinkled morphology formed at lower temperatures shows higher power conversion efficiency and better stability, with further improvement achieved through interfacial and additive engineering, reaching an efficiency of 23.02%.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Chemistry, Multidisciplinary

22.8%-Efficient single-crystal mixed-cation inverted perovskite solar cells with a near-optimal bandgap

Abdullah Y. Alsalloum et al.

Summary: By utilizing a mixed-cation single-crystal absorber layer, the external quantum efficiency band edge can be redshifted, leading to increased short-circuit current densities and overall efficiencies.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Multidisciplinary Sciences

Subwavelength dielectric resonators for nonlinear nanophotonics

Kirill Koshelev et al.

SCIENCE (2020)

Article Materials Science, Multidisciplinary

Photon recycling in halide perovskite solar cells for higher efficiencies

Seungmin Lee et al.

MRS BULLETIN (2020)

Review Energy & Fuels

Progress and prospects for ultrathin solar cells

Ines Massiot et al.

NATURE ENERGY (2020)

Editorial Material Multidisciplinary Sciences

Prospects for low-toxicity lead-free perovskite solar cells

Weijun Ke et al.

NATURE COMMUNICATIONS (2019)

Article Nanoscience & Nanotechnology

Photovoltaic solar cell technologies: analysing the state of the art

Pabitra K. Nayak et al.

NATURE REVIEWS MATERIALS (2019)

Article Chemistry, Physical

Single-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency

Zhaolai Chen et al.

ACS ENERGY LETTERS (2019)

Editorial Material Optics

Guide for the perplexed to the Shockley-Queisser model for solar cells

Jean-Francois Guillemoles et al.

NATURE PHOTONICS (2019)

Review Nanoscience & Nanotechnology

Applications of nanolasers

Ren-Min Ma et al.

NATURE NANOTECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

Transient Sub-bandgap States in Halide Perovskite Thin Films

S. Nah et al.

NANO LETTERS (2018)

Article Chemistry, Physical

Direct-indirect character of the bandgap in methylammonium lead iodide perovskite

Eline M. Hutter et al.

NATURE MATERIALS (2017)

Review Chemistry, Physical

Energy conversion approaches and materials for high-efficiency photovoltaics

Martin A. Green et al.

NATURE MATERIALS (2017)

Article Multidisciplinary Sciences

Silicon single-photon avalanche diodes with nano-structured light trapping

Kai Zang et al.

NATURE COMMUNICATIONS (2017)

Article Multidisciplinary Sciences

Thin single crystal perovskite solar cells to harvest below-bandgap light absorption

Zhaolai Chen et al.

NATURE COMMUNICATIONS (2017)

Review Multidisciplinary Sciences

Photovoltaic materials: Present efficiencies and future challenges

Albert Polman et al.

SCIENCE (2016)

Review Chemistry, Physical

Light management for photovoltaics using high-index nanostructures

Mark L. Brongersma et al.

NATURE MATERIALS (2014)

Editorial Material Chemistry, Physical

Photonic design principles for ultrahigh-efficiency photovoltaics

Albert Polman et al.

NATURE MATERIALS (2012)

Article Physics, Multidisciplinary

Thermodynamic Upper Bound on Broadband Light Coupling with Photonic Structures

Zongfu Yu et al.

PHYSICAL REVIEW LETTERS (2012)

Article Multidisciplinary Sciences

Fundamental limit of nanophotonic light trapping in solar cells

Zongfu Yu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)

Review Chemistry, Multidisciplinary

Recent Advances in Sensitized Mesoscopic Solar Cells

Michael Graetzel

ACCOUNTS OF CHEMICAL RESEARCH (2009)

Article Nanoscience & Nanotechnology

Enhanced fluorescence emission from quantum dots on a photonic crystal surface

Nikhil Ganesh et al.

NATURE NANOTECHNOLOGY (2007)