相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effectiveness of tungsten addition on the performance of electroplated nickel diffusion barriers for copper metallization on textured silicon
Wen Jauh Chen et al.
THIN SOLID FILMS (2022)
Effect of compressive stress on cavitation erosion-corrosion behavior of nickel-aluminum bronze alloy
Zhenbo Qin et al.
ULTRASONICS SONOCHEMISTRY (2022)
Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel
Arun Rajput et al.
ULTRASONICS SONOCHEMISTRY (2021)
Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath
Charu Singh et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Comparison of the Resistance to Cavitation Erosion and Slurry Erosion of Four Kinds of Surface Modification on 13-4 Ca6NM Hydro-Machinery Steel
C. V. Roa et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Damage Development on the Surface of Nickel Coating in the Initial Period of Erosion
Dominika E. Zakrzewska et al.
MATERIALS (2021)
Microstructural and Electrochemical Characterization of Zinc Coating onto Low Carbon Steel Substrate
A. Medjaldi et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2021)
An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel
Q. He et al.
CERAMICS INTERNATIONAL (2020)
Cr-coated Zr-4 alloy prepared by electroplating and its in situ He+ irradiation behavior
Minjiang Huang et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Microstructure and cavitation erosion behavior of sputtered NiCrAlTi coatings with and without N incorporations
Zhengliang Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Influence of additives on morphology, orientation and anti-corrosion property of bright zinc electrodeposit
Nayana K. Onkarappa et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Preparation, deposited behavior and hydrophobic property of modified graphene oxide reinforced Ni composite coatings by magnetic field assisted electro-brush plating
Dan Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Exploring cavitation erosion resistance of ZrN nanocrystalline coating prepared by double-cathode glow discharge plasma technique
Yuechao Zhang et al.
VACUUM (2020)
Reduced friction and wear of electro-brush plated nickel composite coatings reinforced by graphene oxide
Shaojun Qi et al.
WEAR (2019)
Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate
Miroslaw Szala et al.
COATINGS (2019)
Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS
D. Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Erosion and Abrasion Resistance, Mechanical Properties, and Structure of the TiN, Ti-Cr-Al-N and Cr-Al-Ti-N Coatings Deposited by CFUBMS
Ph Kiryukhantsev-Korneev et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2019)
Pop-in behavior and elastic-to-plastic transition of polycrystalline pure iron during sharp nanoindentation
Fabian Poehl
SCIENTIFIC REPORTS (2019)
Technical Note: Syringe Cell for Electrochemical Testing
A. M. Panindre et al.
CORROSION (2018)
Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings
Murilo S. Lamana et al.
WEAR (2018)
Technical Note: Syringe Cell for Electrochemical Testing
A. M. Panindre et al.
CORROSION (2018)
Microstructure and Cavitation Erosion Resistance of HVOF Deposited WC-Co Coatings with Different Sized WC
Xiang Ding et al.
COATINGS (2018)
Influence of electric contact strengthening on the microstructure and properties of electro brush plating Ni-P/nano-WC composite coatings
Mengkuo Xu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Degradation of AlMg2 aluminium alloy caused by cavitation - An effect of cavitation intensity
Alicja Krystyna Krella
MATERIALS CHARACTERIZATION (2017)
Relationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings
Lei Qiao et al.
ULTRASONICS SONOCHEMISTRY (2017)
Enhancement of cavitation erosion resistance of 316 L stainless steel by adding molybdenum
D. G. Li et al.
ULTRASONICS SONOCHEMISTRY (2017)
Cavitation erosion of CrN/CrCN multilayer
A. K. Krella et al.
WEAR (2017)
Localized Corrosion Characteristics of Nickel Alloys: A Review
Helmuth Sarmiento Klapper et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)
Structure zone diagram and particle incorporation of nickel brush plated composite coatings
L. Isern et al.
SCIENTIFIC REPORTS (2017)
Nickel-tungsten alloy brush plating for engineering applications
Zhimin Zhong et al.
SURFACE & COATINGS TECHNOLOGY (2014)
A corrosion resistant cerium oxide based coating on aluminum alloy 2024 prepared by brush plating
Junlei Tang et al.
APPLIED SURFACE SCIENCE (2011)
Study of deposition patterns of plating layers in SiC/Cu composites by electro-brush plating
Xiangliang Li et al.
APPLIED SURFACE SCIENCE (2011)
The new parameter to assess cavitation erosion resistance of hard PVD coatings
Alicja K. Krella
ENGINEERING FAILURE ANALYSIS (2011)
Cavitation erosion resistance parameter of hard CAVD coatings
Alicja K. Krella
PROGRESS IN ORGANIC COATINGS (2011)
Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel
Kenji Kaneko et al.
SCRIPTA MATERIALIA (2011)
Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel data
Shuji Hattori et al.
WEAR (2010)
Revision of cavitation erosion database and analysis of stainless steel data
Shuji Hattori et al.
WEAR (2010)
Prediction method for cavitation erosion based on measurement of bubble collapse impact loads
Shuji Hattori et al.
WEAR (2010)
Pitting Corrosion of Metals
Roger Newman
ELECTROCHEMICAL SOCIETY INTERFACE (2010)
The influence of TiN coatings properties on cavitation erosion resistance
Alicja Krella
SURFACE & COATINGS TECHNOLOGY (2009)
Cavitation erosion of electroplated nickel composite coatings
Thomas Lampke et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Contact fatigue behavior of nano-ZrO2/Ni coating prepared by electro-brush plating
Bin Jiang et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Structural and electrochemical characterization of Ni nanostructure films on steels with brush plating and sputter deposition
B. Subramanian et al.
CURRENT APPLIED PHYSICS (2007)
Automatic brush plating: An update on brush plating
B Wu et al.
MATERIALS LETTERS (2006)
Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period
A Krella
WEAR (2005)
Synthesis and characterization of nickel tungsten alloys by electrodeposition
N Eliaz et al.
ELECTROCHIMICA ACTA (2005)
Preparation, microstructure and tribological properties of nano-Al2O3/Ni brush plated composite coatings
LZ Du et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Mechanical and corrosion-resistance performance of electrodepo sited titania-nickel nanocomposite coatings
J Li et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Deformation mechanisms operating during nanoindentation of TiN coatings on steel substrates
LW Ma et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Slurry wear and cavitation erosion of thermal-sprayed cermets
K Sugiyama et al.
WEAR (2005)
Cavitation erosion behavior of Cr-Mn-N stainless steels in. comparison with 0Cr13Ni5Mo stainless steel
W Liu et al.
WEAR (2003)
Erosion- and cavitation-corrosion of titanium and its alloys
A Neville et al.
WEAR (2001)
分享论文
