☆ 4.7 Article

Investigation of ultrasonic mechanism and development of tool wear model in ultrasonic elliptic vibration assisted cutting of stainless steel

TRIBOLOGY INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Tool wear and its effect on the surface integrity and fatigue behavior in high-speed ultrasonic peening milling of Inconel 718

Xiaoming Yin et al.

Summary: Ultrasonic-assisted technology has been found to be effective for milling Inconel 718. This study compared tool life and wear mechanisms between high-speed Ultrasonic Peening Milling (UPM) and Conventional Milling (CM) under different wear states. The analysis showed a 32.5% increase in tool life in UPM due to lower tool wear compared to CM. More importantly, UPM significantly improved surface quality and fatigue life with an average increase of 4-17 times.

TRIBOLOGY INTERNATIONAL (2023)

添加到收藏夹

Article Automation & Control Systems

Online measurement of the elastic recovery value of machined surface in milling titanium alloy

Panling Huang et al.

Summary: This study designed a new online measurement system based on digital image correlation to monitor the elastic recovery behavior in the milling process of titanium alloy. Through orthogonal milling experiments and detailed design, the calculation method of elastic recovery value for the machined surface was obtained, and the optimization method of cutting parameters with the minimum elastic recovery value in titanium alloy milling was also obtained.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures

Zhefei Sun et al.

Summary: This paper proposes a sharpening milling CFRP strategy by combining ultrasonic vibration and optimized tool structure. The cutting mechanisms of ultrasonic vibration and tool structure are analyzed, and the milling performance of the optimized tool is verified. Ultrasonic vibration-assisted milling (UVM) with the optimized tool is found to significantly reduce cutting force, cutting temperature, surface defects, and surface roughness, making it an efficient and low damages milling strategy for CFRP.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Engineering, Industrial

Cutting performance and surface integrity for rotary ultrasonic elliptical milling of Inconel 718 with the ball end milling cutter

Yihang Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2023)

添加到收藏夹

Article Thermodynamics

Effects of high-pressure coolant on cooling mechanism in high-speed ultrasonic vibration cutting interfaces

Xiangyu Zhang et al.

Summary: High-pressure coolant (HPC) can effectively reduce cutting temperature. In high-speed ultrasonic vibration cutting (HUVC) with HPC, the cutting speed on titanium alloys can reach 400 m/min due to the significant reduction in cutting temperature. However, the advantages of HUVC with HPC diminish rapidly as the cutting speed increases.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Acoustics

Observation on the behavior of ultrasonic micro-hammer and its effects on the deep drawing process: Numerical simulation and experimental study

Ehsan Malekipour et al.

Summary: This study investigates the combination of ultrasonic vibration with metal forming processes, specifically focusing on Ultrasonically Assisted Deep Drawing (UADD) and its effect on forming force and thickness distribution. Experimental tests were conducted to validate a numerical model, which showed that UV application under micro-hammer conditions significantly reduces forming force but has detrimental effects on thickness distribution of the sheet.

ULTRASONICS (2022)

添加到收藏夹

Article Chemistry, Physical

Characteristics and mechanism in ultrasonic vibration-assisted deformation of Ni-based superalloy thin-walled sheet by quasi-in-situ EBSD

Guangda Shao et al.

Summary: This study investigates the deformation characteristics and mechanism of Ni-based superalloy thin-walled sheet under ultrasonic vibration-assisted (UVA) forming. Experimental results show that ultrasonic vibration reduces the stress response and facilitates grain rotation and dislocation slip, thereby promoting plastic deformation. A new perspective of the acoustic softening mechanism considering grain rotation and dislocation slip is proposed based on the experimental results.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Research on microhardness prediction of 304 stainless steel turning based on dislocation density

Zichuan Zou et al.

Summary: Investigating the microstructural evolution of the machined surface is important for understanding microscopic plastic deformation and reducing work hardening. This study proposed a method to build a three-dimensional cutting model and used a temperature-displacement coupling algorithm for simulation. The effectiveness of the proposed method was verified through comparing simulation results with experimental data. The influence of different parameters on the surface performance was also analyzed.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting

Zhimeng Chen et al.

Summary: This study demonstrates that the cutting performance of Bulk Metallic Glasses can be enhanced only within a carefully-determined window of ultrasonic amplitude. An excessive ultrasonic amplitude may violate the cutting performance.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Aerospace

Ironing effect on surface integrity and fatigue behavior during ultrasonic peening drilling of Ti-6Al-4 V

Yihang LIU et al.

Chinese Journal of Aeronautics (2022)

添加到收藏夹

Article Engineering, Aerospace

Experimental study on rotary ultrasonic vibration assisted drilling rock

Xiaogan Peng et al.

Summary: The study proposed a method of rotary ultrasonic vibration assisted drilling of rocks to improve drilling efficiency and reduce bit pressure; Experimental results showed that different types of rocks have different feed rate ranges.

ADVANCES IN SPACE RESEARCH (2021)

添加到收藏夹

Article Engineering, Mechanical

Performance evaluation of high-speed ultrasonic vibration cutting for improving machinability of Inconel 718 with coated carbide tools

Zhenlong Peng et al.

Summary: The study confirms that high-speed ultrasonic vibration cutting can significantly improve the machinability of Inconel 718, extending tool life, reducing cutting force, and decreasing cutting temperature.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Acoustics

Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel

Zhenlong Peng et al.

Summary: In this study, radial high-speed ultrasonic vibration cutting (R-HUVC) process was adopted to improve the machining performance of finishing hardened steel. Experimental results showed that R-HUVC can achieve lower cutting force, longer tool life, and better surface roughness compared to conventional cutting (CC). It was demonstrated that R-HUVC can be applied to high-speed machining for the finish turning of hardened steel due to its improved machining performance.

ULTRASONICS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Study on formation mechanism and regularity of residual stress in ultrasonic vibration grinding of high strength alloy steel

Jun Wen et al.

Summary: This study investigates the formation mechanism of residual stress in Ultrasonic Vibration Grinding (UVG) and establishes a prediction model, providing a basis for further research on residual stress in UVG. The correlation law between processing parameters and residual stress is obtained, showing that UVG can reduce grinding temperature and retain greater compressive residual stress on the workpiece surface compared to common grinding.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Mechanism study on ultrasonic vibration assisted face grinding of Hard and brittle materials

Xiaofeng Zhang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Influences of machining parameters on tool performance when high-speed ultrasonic vibration cutting titanium alloys

Xiangyu Zhang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanism of chip formation in ultrasonic vibration drilling and experimental research

Shuo Chen et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Constitutive behavior and microstructural evolution in ultrasonic vibration assisted deformation of ultrathin superalloy sheet

B. Meng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of ultrasonic vibration on SUS304 stainless steel subjected to uniaxial plastic deformation

Chun-yuan Chen et al.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS (2018)

添加到收藏夹

Article Acoustics

Investigation on ultrasonic volume effects: Stress superposition, acoustic softening and dynamic impact

Jun Hu et al.

ULTRASONICS SONOCHEMISTRY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Acoustic softening and stress superposition in ultrasonic vibration assisted uniaxial tension of copper foil: Experiments and modeling

C. J. Wang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Mechanical

Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic

J. Y. Shen et al.

WEAR (2015)

添加到收藏夹

Article Engineering, Mechanical

Acoustic softening and residual hardening in aluminum: Modeling and experiments

Zhehe Yao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

添加到收藏夹

Article Engineering, Mechanical

Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels

Deng Jianxin et al.

WEAR (2011)

添加到收藏夹

Article Engineering, Industrial

Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel

M. Anthony Xavior et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

Effect of machining parameters in ultrasonic vibration cutting

Chandra Nath et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Engineering, Industrial

A study on ultrasonic vibration cutting of low alloy steel

Chandra Nath M. Rahman et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Review Engineering, Mechanical

Review of Drucker's postulate and the issue of plastic stability in metal forming

TB Stoughton et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Plastic deformation mechanism of pure aluminum at low homologous temperatures

CM Kuo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Engineering, Manufacturing

Suppression of burrs in turning with ultrasonic elliptical vibration cutting

CX Ma et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

添加到收藏夹

Article Engineering, Manufacturing

Modeling of CBN tool flank wear progression in finish hard turning

Y Huang et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)

添加到收藏夹

Article Engineering, Manufacturing

Study of machining accuracy in ultrasonic elliptical vibration cutting

CX Ma et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.