☆ 4.7 Article

Mechanical and dry sliding tribological characteristics of aluminium matrix composite reinforced with high entropy alloy particles

TRIBOLOGY INTERNATIONAL (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Fabrication, microstructure, and mechanical properties of Al-based metal matrix-TiB2-HEA hybrid composite

M. Chinababu et al.

Summary: This study investigates the fabrication and properties of a metal matrix composite using a cast Al-Si-Mg alloy (LM25) matrix with two variants of particle reinforcements, TiB2 and CoCrFeMnNi high entropy alloy (HEA). The composites were successfully fabricated through the stir-casting process and characterized using TEM, SEM, and XRD analysis. The mechanical properties were found to be improved with the addition of the reinforcement phase, demonstrating higher tensile strength and similar ductility compared to the base metal. The LM25-2 wt% TiB2-3 wt% HEA composite exhibited the highest tensile strength due to the presence of TiB2 and HEA particles and the high dislocation density.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of FeCoNiCrMn and Al2O3 hybrid particle-reinforced aluminum matrix composites fabricated by microwave sintering

H. M. Wang et al.

Summary: This study investigated the effects of different weight fractions of Al2O3 micro/nanoparticles on the microstructure, mechanical properties, and strengthening mechanisms of dual-phase-reinforced AMCs. The hybrid particles of HEA and Al2O3 synergistically delayed interfacial crack propagation and resulted in significantly improved hardness, yield strength, and compressive strength compared to single HEA-reinforced samples. Orowan strengthening, dislocation strengthening, and thermal mismatch strengthening were identified as the main strengthening mechanisms in the composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating microstructural and mechanical behavior of stir-squeeze cast TiO2-SiC/Al6082 bimodal hybrid composites

Subodh Kumar et al.

Summary: Greater advantages of employing hybrid reinforced advanced aluminum matrix composites have been highlighted recently. In this study, Al6082 bimodal hybrid composites embedded with different proportions of SiC and TiO2 particles were fabricated using a modified stir-squeeze cast technique. Microstructural analysis revealed that the properties of the composites deteriorated when the content of SiC exceeded 3 wt.%. The incorporation of 3 wt.% SiC and 0.5 wt.% TiO2 resulted in the maximum enhancement of mechanical properties in Al6082 alloy.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallographic orientation and wear characteristics of TiN, SiC, Nb embedded Al7075 composite

V Chakkravarthy et al.

Summary: The wear resistant TiN, SiC, Nb blended Al7075 composite fabricated by ultrasonic assisted squeeze casting route exhibited high compressive residual stresses, grain refinement, and improved wear resistance. The segregated reinforcements across grain boundaries played a positive role in enhancing tribological performance by Zenner pinning mechanism and Orowan load bearing effect, facilitating easy sliding by attenuating the impact of contact stresses.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Effect of high entropy particle on aerospace-grade aluminium composite developed through combined mechanical supersonic vibration and squeeze infiltration technique

Vasanthakumar Pandian et al.

Summary: The study successfully synthesized HEA particles for reinforcing aluminum metal matrix, with confirmed mechanical properties such as hardness, impact strength, wear resistance, and corrosion resistance. The presence of different phases and precipitates in the composite materials was confirmed through XRD analysis, and the composite specimens showed improved mechanical performance compared to the base cast specimen.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Intermetallic Compounds on the Microstructure, Mechanical Properties, and Tribological Behaviors of Pure Aluminum by Adding High-Entropy Alloy

Qinglin Li et al.

Summary: A novel aluminum matrix composite reinforced by multiphase intermetallic compounds was fabricated and its microstructure, compression properties, and tribological behavior were analyzed. The addition of high-entropy alloy improved the mechanical properties and wear resistance of the composite.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review on mechanically alloyed high entropy alloys: processing challenges and properties

Akshay Kumar et al.

Summary: High entropy alloys are innovative materials with excellent mechanical properties, wear resistance, and corrosion resistance, making them suitable for a wide range of industrial applications. Researchers have focused on non-equimolar alloys and mechanical alloying methods in their extensive studies.

MATERIALS RESEARCH EXPRESS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanically alloyed high entropy alloys: existing challenges and opportunities

Akshay Kumar et al.

Summary: High entropy alloys (HEAs) were first reported in 2004, but significant progress in this field has been made since 2010 due to their unique properties and the ability to form various compositions. Researchers initially focused on equiatomic HEAs and later shifted to non-equiatomic alloys. Mechanical alloying and sintering were identified as effective methods for processing HEAs. This review discusses the properties, functional properties, and applications of mechanically alloyed HEAs, as well as the existing challenges and opportunities.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Engineering, Mechanical

Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors

Yun Zhang et al.

Summary: Al0.5CoCrFeNi high-entropy alloy particles reinforced aluminum matrix composites (HEAps/AMCs) with various reinforcement additions were fabricated and their wear properties were investigated. It was found that a moderate range of reinforcement exhibited lower coefficient of friction and wear rate compared to the matrix alloy. The HEA particles hindered plastic deformation and improved the crack resistance of the composites through tight interface and interaction with dislocations.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of a novel CoCrFeMnNi high-entropy alloy-reinforced AA6082 composite

Akshay Kumar et al.

Summary: By using mechanical alloying and stir-squeeze casting, CoCrFeMnNi high-entropy alloy and Al-6082 composite were successfully developed, showing that a consistent distribution of HEA particles can significantly enhance the mechanical properties of the composite under as-cast condition.

JOURNAL OF MATERIALS RESEARCH (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multiple strengthening via high-entropy alloy particle addition in titanium matrix composites fabricated by spark plasma sintering

Yifeng Xiong et al.

Summary: This study investigates the strong interface bonding of particle reinforced metal matrix composites using high entropy alloy (HEA) addition. The results show that the addition of HEAs enhances the yield strength and hardness values of the composites, achieving strengthening through multiple mechanisms.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial Characteristics and Enhanced Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy Particles Reinforced Al Matrix Composites

Yun Zhang et al.

Summary: This study investigated the microstructure and mechanical properties of Al0.5CoCrFeNi high-entropy alloy particles reinforced aluminum matrix composites (HEAps/AMCs) fabricated by ultrasonic casting technique. It was found that incoherent FCC phases and tiny coherent L1(2) nanophases were precipitated inside the matrix and around the interface between Al and HEAps, respectively. The introduction of different contents of HEAps improved the strength and hardness of the composites, but excessive HEAps had a detrimental effect on the tensile properties.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review

D. Kumar et al.

Summary: This research paper reviews the mechanical properties and surface characteristics of AMMCs and investigates the influence of different processing methods and reinforcement particles on their performance.

INTERNATIONAL JOURNAL OF ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites

Zhanwei Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach

T. Sathish et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites

S. Devaganesh et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Mechanical

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Guanyu Deng et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Automation & Control Systems

Producing of FeCoNiCrAl high-entropy alloy reinforced Al composites via friction stir processing technology

Jicheng Gao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites

Yunzi Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles

Tiwen Lu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry sliding wear behaviour of Al 7075/Al2O3/B4C composites using mathematical modelling and statistical analysis

Manu Khare et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Generation of mechanically mixed layer during wear in hybrid aluminum MMC under as-cast and age hardened conditions

A. M. Rajesh et al.

SN APPLIED SCIENCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effects of Cr particles addition on the aging behavior and mechanical properties of SiCp/7075Al composites

Tiwen Lu et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites

Tiwen Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles

G. M. Karthik et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of Tribological Behavior of Silicon Carbide Based Aluminum Metal Matrix Composites under Dry and Lubricated Environment

Kalyan Kumar Singh et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)

添加到收藏夹

Article Chemistry, Physical

Fabrication and characterization of 2024 aluminium - High entropy alloy composites

K. Praveen Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tribological characterization of Al7075-graphite composites fabricated by mechanical alloying and hot extrusion

R. Deaquino-Lara et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Physical

Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing

D. R. Ni et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of Al-based metal matrix composites reinforced by Al60Cu20Ti15Zr5 glassy particles by high pressure hot pressing consolidation

M. Yuan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Studies on mechanical and dry sliding wear of Al6061-SiC composites

G. B. Veeresh Kumar et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites

R. N. Rao et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Engineering, Mechanical

Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites

C. S. Ramesh et al.

WEAR (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology

Jinfeng Leng et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.