Design method of axial compression stability for cross-section corrugated plate steel special-shaped column

Article Construction & Building Technology

Experimental study on local stability of special-shaped HSS columns with single-corrugation

Yan-Bo Wang et al.

Summary: This study investigates the use of L- and T-shaped thin-walled tubes with a single-corrugation to delay local buckling and maximize the strength of high-strength steel (HSS) in constructions.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2023)

添加到收藏夹

Article Engineering, Civil

Behaviour, finite element modelling and design of cruciform section steel columns

Behnam Behzadi-Sofiani et al.

Summary: This study investigates the mechanical behavior and design of steel equal-leg cruciform section members under axial compression. Experimental data is used to validate finite element models and a parametric study is conducted to consider different slenderness ratios and boundary conditions. The results show that the mechanical response and load-carrying capacity depend on both the column slenderness and the torsional to flexural elastic buckling load ratio. The existing design rules for cruciform section columns are found to have lower accuracy and consistency compared to a new proposal, which offers improved strength predictions.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Article Engineering, Civil

Analytical and finite element analyses of flexural and torsional buckling of I-columns with discrete braces

Hamaidia Achref et al.

Summary: The present study investigates the buckling strength of braced thin-walled columns under bending and torsional modes. The torsion buckling modes of braced columns have been overlooked in design and not adequately assessed. Elastic discrete springs in bending and torsion are taken into account to control the buckling behavior. Analytical solutions are derived for bending and torsion buckling modes in the case of simply supported struts with doubly symmetric cross sections. The finite element approach is implemented for more general cases considering 3D elastic springs and arbitrary cross sections. The efficiency of the closed-form solutions and the numerical approach is successfully verified, and the effect of braces in enhancing the buckling capacity is studied.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Shear Capacity Analysis of Welded Steel I-Girders with Corrugated Webs based on First Yield

Xuqun Lin et al.

Summary: The use of corrugated-web beams (CWBs) in steel structural designs has become popular due to their improved performance in terms of deformation and stability against buckling failure. Research has shown that CWBs can be considered as an alternative to normal beams in structural designs. Various calculations and simulations have been performed to accurately predict the shear capacity of CWBs, with the conclusion that equations from specific standards can adequately estimate the shear capacity requirements for Australian structural design.

INTERNATIONAL JOURNAL OF STEEL STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

The analysis on the seismic behavior of T-shaped prefabricated special-shaped CFST with rectangular multi-cell columns

Wenbin Cui et al.

STRUCTURES (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Lateral-torsional buckling of box beam with corrugated steel webs

Feng Yu-lin et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

添加到收藏夹

Article Engineering, Civil

Experimental study of earthquake-resilient prefabricated sinusoidal corrugated web beam-column joint

Zi-qin Jiang et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Construction & Building Technology

Seismic performance of prefabricated corrugated web beam-column joint with replaceable cover plates

Zi-qin Jiang et al.

ADVANCES IN STRUCTURAL ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Buckling behavior of steel column with triangularly corrugated web

Sergey Kudryavtsev

10TH INTERNATIONAL SCIENTIFIC CONFERENCE BUILDING DEFECTS (BUILDING DEFECTS 2018) (2019)

添加到收藏夹

Article Construction & Building Technology

Research on special-shaped concrete-filled steel tubular columns under axial compression

Xianggang Liu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

添加到收藏夹

Article Engineering, Civil

Experimental study and numerical simulation of corrugated steel plate shear walls subjected to cyclic loads

Qiang Cao et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Modal buckling behaviour of long polygonal tubes in uniform torsion using the generalised cFSM

Morgan A. Rendall et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Analytical behavior of special-shaped CFST stub columns under axial compression

Fa-Cheng Wang et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Design theory of earthquake-resilient prefabricated sinusoidal corrugated web beam-column joint

A. L. Zhang et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article Engineering, Civil

An innovative I-beam to hybrid fabricated column connection: Experimental investigation

Seyed Nima Sadeghi et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article Engineering, Civil

A benchmark analytical approach for evaluating ultimate compressive strength of hollow corrugated stub columns

Mohammad Nassirnia et al.

THIN-WALLED STRUCTURES (2017)

添加到收藏夹

Article Engineering, Civil

Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions

Y. Q. Wang et al.

THIN-WALLED STRUCTURES (2017)

添加到收藏夹

Article Engineering, Civil

Innovative hollow columns comprising corrugated plates and ultra high-strength steel tubes

Mohammad Nassirnia et al.

THIN-WALLED STRUCTURES (2016)

添加到收藏夹

Article Engineering, Civil

Girders with trapezoidally corrugated webs subjected by combination of bending, shear and path loading

B. Jager et al.

THIN-WALLED STRUCTURES (2015)

添加到收藏夹

Article Engineering, Civil

Evaluation and comparison of behavior of corrugated steel plate shear walls

Y. Yadollahi et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2015)

添加到收藏夹

Article Engineering, Civil

Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs

Sherif A. Ibrahim

ENGINEERING STRUCTURES (2014)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life of girders with trapezoidally corrugated webs: An experimental study

B. Koevesdi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Construction & Building Technology

In-plane behaviour of beam-to-column connections of corrugated web I-sections

R. Aydin et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

添加到收藏夹

Article Construction & Building Technology

On the hysteretic behavior of trapezoidally corrugated steel shear walls

Fereshteh Emami et al.

STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (2014)

添加到收藏夹

Article Engineering, Civil

Panel zone modelling of Flanged Cruciform Columns: An analytical and numerical approach

Mohammad Motallebi Nasrabadi et al.

ENGINEERING STRUCTURES (2013)

添加到收藏夹

Article Engineering, Civil

Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls

Fereshteh Emami et al.

ENGINEERING STRUCTURES (2013)

添加到收藏夹

Article Construction & Building Technology

Application of corrugated plates as the web of steel coupling beams

Amir Shahmohammadi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

添加到收藏夹

Article Engineering, Civil

Buckling of fixed-ended lean duplex stainless steel hollow columns of square, L-, T-, and +-shaped sections under pure axial compression - a finite element study

M. Longshithung Patton et al.

THIN-WALLED STRUCTURES (2013)

添加到收藏夹

Article Construction & Building Technology

Seismic behavior of special shaped column composed of concrete filled steel tubes

Ting Zhou et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

添加到收藏夹

Article Construction & Building Technology

Experimental investigation of light-gauge steel plate shear walls

JW Berman et al.

JOURNAL OF STRUCTURAL ENGINEERING (2005)

添加到收藏夹

Design method of axial compression stability for cross-section corrugated plate steel special-shaped column

相关参考文献

导出引文

分享论文