☆ 4.4 Article

Mechanical optimisation of Ni coatings produced by low-pressure cold spray

SURFACE ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Ultrasonic welding of glass reinforced epoxy composites using thermoplastic hybrid interlayers

Felice Rubino et al.

Summary: A glass fiber/polypropylene semi-impregnated lamina was added to improve the weldability of an epoxy laminate. Ultrasonic welding of the hybrid composite was performed with varying welding parameters, resulting in different lap-shear strengths and weld interface qualities. The welding time had a significant influence on the intermixing of the thermoplastic layer and the formation of a strong weld area, while the amplitude and pressure mainly affected the power absorption and overall welding performance.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical properties optimization of Cr3C2-NiCr coatings produced by compact plasma spray process

Felice Rubino et al.

Summary: In this study, low-power compact plasma spray (CPS) equipment was used to deposit Cr3C2-based cermet coatings on carbon steel substrate. Design of experiment and ANOVA analysis were employed to select and optimize the spraying parameters and evaluate the effect of these variables on the morphology and mechanical properties of the coatings. By optimizing the processing parameters, dense and compact coatings with high hardness and good adhesion strength were obtained.

SURFACE & COATINGS TECHNOLOGY (2023)

添加到收藏夹

Review Materials Science, Coatings & Films

Influence of processing conditions on the mechanical, tribological and fatigue performance of cold spray coating: a review

Santosh Kumar

Summary: This paper studies the effect of processing conditions on the tribological and mechanical properties of cold-sprayed coatings, including the pressure and temperature of propellant gas, powder particle morphology, and post-process treatments. It also discusses the effect of microstructure and processing conditions on the fatigue and static characteristics of cold spray material.

SURFACE ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical Simulation of Cold Spray Bonding for CrFeNi Medium-Entropy Alloy

Nima Pourakbar Zehtabi et al.

Summary: Cold spray technology, as a solid-state deposition method, has the potential for deposition of high-entropy alloys and medium-entropy alloys. A finite element model is developed to simulate the deposition process, which can guide the experimental parameter selection and reduce the cost.

ADVANCED ENGINEERING MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Alternative low-power plasma-sprayed inconel 625 coatings for thermal solar receivers: Effects of high temperature exposure on adhesion and solar absorptivity

David Merino-Millan et al.

Summary: This study investigates thermal-sprayed Inconel 625 coatings as an alternative option for concentrated solar power plants. The results show that higher temperatures and longer exposure times lead to improved adherence and absorptivity of the coatings, which could potentially enhance the performance of concentrated solar power plants.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Review Materials Science, Coatings & Films

Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating performance: a review

Santosh Kumar et al.

Summary: High-temperature corrosion of coal-fired boiler parts poses a serious threat to thermal power plant efficiency. Various corrosion control techniques are used, with dense and defect-free coatings deposited by thermal spray technique showing promising results. Factors leading to porosity in thermal spray coatings can be prevented by coating post-treatment, and the performance of different coatings and their resistance to hot corrosion are reviewed in this paper.

SURFACE ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Coatings & Films

Influence of processing conditions on the properties of thermal sprayed coating: a review

Santosh Kumar et al.

Summary: Thermal spray coatings enhance parts performance by adding functionality to surfaces; Reliable coatings with high mechanical properties require consideration of process parameters setting; This review paper provides an overview of distinct thermal spray coatings, historical development and hot corrosion mechanisms.

SURFACE ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal Spray Processes in Concentrating Solar Power Technology

Felice Rubino et al.

Summary: Solar power as a sustainable and affordable energy source has gained significant interest, but to promote its penetration in the energy market, it needs to be cost-competitive and continuously improve through the development of new materials and manufacturing processes. The manufacturing process significantly affects the efficiency and durability of solar power plants, making research and development of efficient manufacturing procedures a key aspect.

METALS (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Erosion of cold sprayed aeronautical coatings*

D. Cruz et al.

SURFACE ENGINEERING (2019)

添加到收藏夹

Review Materials Science, Coatings & Films

A perspective review on the bonding mechanisms in cold gas dynamic spray

Antonio Viscusi et al.

SURFACE ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of spray angle on Ni particle deposition behaviour in cold spray

Yingchun Xie et al.

SURFACE ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Fatigue behaviour of Inconel 625 cold spray coatings

Pasquale Cavaliere et al.

SURFACE ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Finite element analyses of pure Ni cold spray particles impact related to coating crack behaviour

Pasquale Cavaliere et al.

SURFACE ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray

Ying-Kang Wei et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates-Part I: High Velocity Thermal Spray Coatings

Xiaotao Luo et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermo-Mechanical Finite Element Modeling of the Laser Treatment of Titanium Cold-Sprayed Coatings

Felice Rubino et al.

COATINGS (2018)

添加到收藏夹

Proceedings Paper Physics, Applied

Thermo-Mechanical Modeling of Laser Treatment on Titanium Cold-Spray Coatings

V. Paradiso et al.

PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Cold Spray Deposition of Ni and WC-Reinforced Ni Matrix Composite Coatings

S. A. Alidokht et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Corrosion behavior of low pressure cold sprayed Zn-Ni composites coating

Guosheng Huang et al.

ANTI-CORROSION METHODS AND MATERIALS (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Crystallization Evolution of Cold-Sprayed Pure Ni Coatings

P. Cavaliere et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective Laser Treatment on Cold-Sprayed Titanium Coatings: Numerical Modeling and Experimental Analysis

Pierpaolo Carlone et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the Improvement of AA2024 Wear Properties through the Deposition of a Cold-Sprayed Titanium Coating

Antonello Astarita et al.

METALS (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Critical review of corrosion protection by cold spray coatings

S. M. Hassani-Gangaraj et al.

SURFACE ENGINEERING (2015)

添加到收藏夹

Review Materials Science, Coatings & Films

Cold spray coating process for corrosion protection: a review

N. Bala et al.

SURFACE ENGINEERING (2014)

添加到收藏夹

Review Materials Science, Coatings & Films

Cold spray coating: review of material systems and future perspectives

A. Moridi et al.

SURFACE ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Cold-Sprayed Ni-Al2O3 Coatings for Applications in Power Generation Industry

F. Sevillano et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation of particle impact conditions with bonding, nanocrystal formation and mechanical properties in kinetic sprayed nickel

Gyuyeol Bae et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Electrochemistry

Performance of cold sprayed Ni-20Cr and Ni-50Cr coatings on SA 516 steel in actual industrial environment of a coal fired boiler

N. Bala et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of particle size on the microstructure and properties of kinetic sprayed nickel coatings

Gyuyeol Bae et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Chemistry, Physical

Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying

Wen-Ya Li et al.

APPLIED SURFACE SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.