☆ 4.7 Article

Optimization and mechanism of precise finishing of TC4 alloy by plasma electrolytic polishing

SURFACE & COATINGS TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Increasing the Hardness and Corrosion Resistance of the Surface of CP-Ti by Plasma Electrolytic Nitrocarburising and Polishing

Sergei Kusmanov et al.

Summary: The study demonstrates the possibility of increasing the hardness to 1420 HV and the corrosion resistance of the CP-Ti surface through a combined plasma electrolytic treatment. The treatment involves anodic plasma electrolytic nitrocarburising in a solution of ammonia, acetone, and ammonium chloride at 900 degrees C, followed by plasma electrolytic polishing. The research focuses on the morphology, surface roughness, phase composition, structure, microhardness, and corrosion characteristics of the modified layer. Results show that an increase in surface roughness negatively affects the corrosion resistance, and plasma electrolytic polishing can effectively remove the outer porous oxide layer for improved corrosion resistance. The best reduction in corrosion current density is achieved after plasma electrolytic polishing in a solution of ammonium fluoride (4%) at 300 V for 3 minutes, with a decrease of 13 times compared to CP-Ti and two orders compared to a plasma electrolytic nitrocarburising sample.

MATERIALS (2023)

添加到收藏夹

Article Automation & Control Systems

Characteristics and function of vapour gaseous envelope fluctuation in plasma electrolytic polishing

Chuanqiang Zhou et al.

Summary: This study investigates the evolution process and function mechanism of the vapour gaseous envelope (VGE) with voltage change in plasma electrolytic polishing (PEP). The results indicate that the fluctuation of VGE is the key to the effect of PEP, as it enables electrolyte to constantly contact and separate from the workpiece surface, leading to electrochemical reactions and plasma discharge for polishing.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Process analysis of plasma-electrolytic polishing (PeP) of forming tools

Hans-Peter Schulze et al.

Summary: Plasma-electrolytic Polishing is an innovative process using water-based electrolytes for deburring and surface smoothing. It is efficient, does not affect the functional geometry, and achieves lower surface roughness.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Pretreatment of cutting tools by plasma electrolytic polishing (PEP) for enhanced adhesion of hard coatings

Sehoon An et al.

Summary: The article explores the versatility of plasma electrolytic polishing (PEP) for cleaning and coating the surface of cemented carbide cutting tools. Results show that PEP treatment improves cleaning effectiveness and coating adhesion, leading to a significant increase in tool life.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Role of polymorph microstructure of Ti6Al4V alloy on PEO coating formation in phosphate electrolyte

Ting Wu et al.

Summary: The study investigates the formation behavior of PEO coatings on Ti6Al4V alloy with different lattice structures revealing the influence of Ti phases on coating morphology and composition. Higher current density promotes coating growth and reduces surface roughness. The final coatings primarily consist of anatase, rutile, and an amorphous phase containing phosphorous.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Evolution of model roughness on quasi-pure aluminum during plasma electrolytic polishing

A. Spica et al.

Summary: This paper investigates the material removal evolution during Plasma Electrolytic Polishing on 1050 aluminum alloy, highlighting the significance of applied voltage on aluminum removal. Results show that high voltage leads to high quality polishing and rapid elimination of rolling streaks. Significant reduction in roughness can be achieved in just a few minutes of processing, with valleys not undergoing material removal as long as peak to valley height remains high enough.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Features and Surface Hardening of Ultrafine-Grained Ti-6Al-4V Alloy through Plasma Electrolytic Polishing and Nitrogen Ion Implantation

Marina K. Smyslova et al.

Summary: This study investigates the near-surface layer microstructure in Ti-6Al-4V alloy samples subjected to plasma electrolytic polishing (PEP) and subsequent high-energy ion implantation with nitrogen (II). Despite the substrate structure, an enhanced microhardness effect was observed, exceeding the penetration depth of the implanted ions.

METALS (2021)

添加到收藏夹

Article Engineering, Chemical

Physical Features of Anodic Plasma Electrolytic Carburising of Low-Carbon Steels

S. Yu. Shadrin et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of process parameters on corrosion behavior of Ti6Al4V alloy processed by selective laser melting

Chenghui Qian et al.

JOURNAL OF LASER APPLICATIONS (2020)

添加到收藏夹

Article Engineering, Environmental

A self-adjusting PTFE/TiO2 hydrophobic double-layer coating for corrosion resistance and electrical insulation

Shuqi Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Review Chemistry, Physical

Mechanism and technological opportunity of plasma electrolytic polishing of metals and alloys surfaces

P. N. Belkin et al.

APPLIED SURFACE SCIENCE ADVANCES (2020)

添加到收藏夹

Article Chemistry, Analytical

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology

Igor Danilov et al.

MICROMACHINES (2019)

添加到收藏夹

Article Engineering, Mechanical

Effects of mechanical polishing treatments on high cycle fatigue behavior of Ti-6Al-2Sn-4Zr-2Mo alloy

Fusen Yuan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrolytic Plasma Polishing of Pipe Inner Surfaces

Matthias Cornelsen et al.

METALS (2018)

添加到收藏夹

Review Construction & Building Technology

Orthogonal test design for optimization of synthesis of super early strength anchoring material

Xianjun Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of the Velocity and the Number of Polishing Passages on the Roughness of Electrolytic Plasma Polished Pipe Inner Surfaces

Matthias Cornelsen et al.

METALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Electrolyte-Plasma Polishing of Titanium and Niobium Alloys

Yu. G. Aliakseyeu et al.

SCIENCE & TECHNIQUE (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Correlations between the growth mechanism and properties of micro-arc oxidation coatings on titanium alloy: Effects of electrolytes

Qingbiao Li et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of complex LCF and dwell load regimes on fatigue of Ti-6Al-4V

P. O. Tympel et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Electric field effect on surface layer removal during electrolytic plasma polishing

E. V. Parfenov et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Surface finish machining of medical parts using Plasma electrolytic Polishing

Henning Zeidler et al.

SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)

添加到收藏夹

Article Thermodynamics

Orthogonal test design to optimize products and to characterize heavy oil via biomass hydrothermal treatment

Ying Gao et al.

ENERGY (2015)

添加到收藏夹

Article Materials Science, Coatings & Films

Electrochemical polishing of Ti-13Nb-13Zr alloy

Wojciech Simka et al.

SURFACE & COATINGS TECHNOLOGY (2012)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Analytical Study on Mechanism of Electrolysis and Plasma Polishing

Ji Wang et al.

ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4 (2012)

添加到收藏夹

Article Engineering, Industrial

Workpiece surface integrity of Ti-6-4 heat-resistant alloy when employing different polishing methods

D. A. Axinte et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Physics, Applied

Development of Decorative and Corrosion Resistant Coatings for the Surface Refinement of Magnesium Alloys by Plasma-based Methods

Holger Hoche et al.

PLASMA PROCESSES AND POLYMERS (2009)

添加到收藏夹

Proceedings Paper Thermodynamics

Micro- and nanoscaled titanium surface structures textured by electrolytic plasma and etching methods

U. Beck et al.

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2007)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Surface roughness and fatigue performance of commercially pure titanium and Ti-6Al4V alloy after different polishing protocols

AS Guilherme et al.

JOURNAL OF PROSTHETIC DENTISTRY (2005)

添加到收藏夹

Review Materials Science, Multidisciplinary

Surface modification of titanium, titanium alloys, and related materials for biomedical applications

XY Liu et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure and properties characterization of ceramic coatings produced on Ti-6Al-4V alloy by microarc oxidation in aluminate solution

WB Xue et al.

MATERIALS LETTERS (2002)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of vapor-gaseous envelope behavior on plasma electrolytic coating removal

RR Nevyantseva et al.

SURFACE & COATINGS TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.