4.7 Article

Seismic fragility matrices for large scale probabilistic structural safety assessment

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Geological

Fragility curves of masonry buildings in aggregate accounting for local mechanisms and site effects

Michele Angiolilli et al.

Summary: This study proposes a method for evaluating the seismic performance of masonry buildings, taking into account the potential impact of local mechanisms and site amplification on fragility curves. Nonlinear dynamic analysis was performed on an unreinforced masonry aggregate to simulate the in-plane and out-of-plane response of the building. The results showed that site effects strongly influenced the seismic vulnerability of the aggregate.

BULLETIN OF EARTHQUAKE ENGINEERING (2023)

Article Engineering, Geological

Urban scale risk assessment including SSI and site amplification

Chiara Amendola et al.

Summary: Large-scale risk analysis often fails to consider local site amplification and soil-structure interaction effects, leading to inaccurate fragility estimates. To address this issue, we propose a novel framework that incorporates SSI and site amplification effects for large-scale applications. By using globally available data, the approach accounts for soil, foundation, and building portfolio characteristics. The results demonstrate that the conventional way of calculating fragility curves may lead to different seismic risk evaluations, especially in soft soil formations.

BULLETIN OF EARTHQUAKE ENGINEERING (2023)

Article Construction & Building Technology

Seismic Fragility Assessment of Inner Peripheries of Italy through Digital Crowd-Sourcing Technologies

Antonio Sandoli et al.

Summary: The assessment of the structural and seismic fragility of minor historical centers in Italy's Inner Peripheries is crucial for preserving the historical and cultural features of the country's building stock. This research investigates the use of digital crowd-sourcing technologies for large-scale probabilistic structural safety assessment. By collecting data and information from virtual inspections, historical databases, maps, and urban plans, the research identifies clusters of buildings in the area of interest and determines their levels of seismic fragility through the development of fragility curves. The proposed approach provides a satisfactory initial screening and helps prioritize zones for further investigations or structural interventions to mitigate seismic risk.

BUILDINGS (2023)

Article Engineering, Geological

Regional based exposure models to account for local building typologies

G. Tocchi et al.

Summary: This paper aims to improve exposure modeling at regional scale by investigating the variability of masonry building typologies distribution. It proposes a methodology to recalibrate exposure models at regional scale and evaluates the influence of the improved characterization of regional vulnerability on damage and risk assessment. The study shows that the analysis of local building typologies may strongly impact the evaluation of seismic risk at territorial scale.

BULLETIN OF EARTHQUAKE ENGINEERING (2022)

Article Architecture

A Multiscale Approach for the Seismic Vulnerability Assessment of Historical Centres in Masonry Building Aggregates: Cognitive Approach and Interdisciplinary Perspectives

Vieri Cardinali et al.

Summary: The research presents a holistic multiscale approach for the seismic vulnerability assessment of masonry building aggregates, combining different strategies through interdisciplinary perspectives. By acquiring various information, selecting alternative vulnerability methodologies, and utilizing different informative management systems, a coherent assessment methodology has been developed. The approach was applied to the city of Scarperia, demonstrating differences within the levels considered and the importance of the improvements made.

INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2022)

Article Engineering, Geological

Seismic vulnerability assessment of minor Italian urban centres: development of urban fragility curves

A. Sandoli et al.

Summary: This paper presents a novel methodology for developing urban fragility curves and damage probability matrices to predict seismic damage scenarios for small and medium Italian urban centres. The methodology focuses on URM buildings only and has been validated using data from the Rocca di Mezzo town in Italy. The results show a good agreement between theoretical predictions and actual damage scenarios, indicating the importance of this methodology for emergency planning in vulnerable areas.

BULLETIN OF EARTHQUAKE ENGINEERING (2022)

Article Engineering, Mechanical

A vulnerability index based-approach for the historical centre of the city of Latronico (Potenza, Southern Italy)

N. Chieffo et al.

Summary: This study aims to illustrate a vulnerability approach for aggregate masonry buildings in an urban area of Latronico, Basilicata Region. The research evaluates damage propensity of the masonry stock based on seismic events with different magnitudes and epicentre distances, providing an overview of the asset exposed at risk.

ENGINEERING FAILURE ANALYSIS (2022)

Article Engineering, Geological

Site effects and soil-foundation-structure interaction: derivation of fragility curves and comparison with Codes-conforming approaches for a masonry school

A. Brunelli et al.

Summary: The paper investigates the impact of site-amplification and soil-foundation-structure interaction on seismic response of masonry structures, validating the reliability of conventional code-conforming approaches through nonlinear dynamic analyses. The study indicates a potentially beneficial role of SFS interaction and soil hysteresis in reducing structural damage probability.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Article Environmental Sciences

On the Use of Web Mapping Platforms to Support the Seismic Vulnerability Assessment of Old Urban Areas

Cosimo Columbro et al.

Summary: This article evaluates the opportunities offered by web-based mapping platforms in the seismic vulnerability assessment of masonry buildings in old urban areas. By comparing the results obtained from on-site and remote inspections, it confirms that web-based mapping platforms can efficiently complement traditional field surveys.

REMOTE SENSING (2022)

Article Engineering, Civil

On occurrence disaggregation of probabilistic seismic hazard

Pasquale Cito et al.

Summary: The disaggregation of probabilistic seismic hazard allows for quantifying the contribution of different earthquake scenarios to the occurrence of a specified ground motion intensity measure threshold. This disaggregation is important for earthquake engineering applications, but current literature often relies on approximations that may lead to misleading results.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2022)

Article Engineering, Civil

Fragility curves for existing reinforced concrete buildings, including soil-structure interaction and site amplification effects

Dimitris Pitilakis et al.

Summary: This study investigates the impacts of soil-foundation-structure interaction (SSI) and site amplification effects on the seismic vulnerability of buildings with shallow foundations. The study proposes a modular approach to assess and modify the vulnerability of these buildings by considering SSI and site amplification effects.

ENGINEERING STRUCTURES (2022)

Article Engineering, Geological

Empirical fragility curves for Italian URM buildings

Annalisa Rosti et al.

Summary: This paper describes the derivation of an empirical fragility model for residential unreinforced masonry buildings based on Italian post-earthquake damage data. It also discusses the clustering strategy implemented to refine vulnerability classes and the specific procedure built up to determine the vulnerability composition of the exposed URM building stock. The empirically-derived model has been applied to the national seismic risk platform for assessing seismic risk in Italy.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Engineering, Geological

Mechanics-based fragility curves for Italian residential URM buildings

Marco Dona et al.

Summary: Seismic risk assessment at the territorial level is crucial for countries with intense seismic activity like Italy. An academia-developed mechanics-based seismic fragility model for Italian residential masonry buildings shows effectiveness in simulating damage scenarios and conducting risk analyses on a territorial scale, with good fit between model results and observed damage.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Engineering, Geological

Seismic risk assessment of residential buildings in Italy

Mauro Dolce et al.

Summary: The last National Risk Assessment for Italy, conducted by the Department of Civil Protection, followed specific requirements and obtained consensus from the scientific community. The collaborative development of a consensus-based national seismic risk assessment resulted in the description of main results and expected impact measures.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Engineering, Geological

The heuristic vulnerability model: fragility curves for masonry buildings

Sergio Lagomarsino et al.

Summary: The macroseismic vulnerability model for unreinforced masonry existing buildings, based on empirical and expert elicitation methods, has been calibrated and improved to produce satisfactory results, playing a significant role in the development of Italian Risk Maps.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Engineering, Civil

Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy

Valentina Cima et al.

Summary: Assessing the seismic vulnerability of masonry buildings in specific regions of Italy is an important issue, with fragility curves being an effective method for predicting potential damages. This study generated virtual populations of buildings from a selected case study in Borgo San Rocco to obtain consistent fragility curves.

STRUCTURES (2021)

Article Engineering, Geological

Seismic fragility curves of steel structures including soil-structure interaction and variation of soil parameters

M. R. Akhoondi et al.

Summary: This paper focuses on the calculation of seismic fragility curves for steel structures used in highly seismic regions, taking into account soil flexibility and uncertainties. The study shows that variations in soil parameters significantly affect the collapse behavior of shorter buildings, and soil-structure interaction increases collapse probability.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

Article Engineering, Geological

Fragility curves for Italian URM buildings based on a hybrid method

A. Sandoli et al.

Summary: A hybrid seismic fragility model was developed in this paper for assessing the seismic vulnerability of masonry buildings in Italy. By combining expert judgment and mechanical approaches, typological fragility curves were derived to predict seismic vulnerability and expected damage scenarios accurately. The effectiveness of the proposed model was demonstrated by comparing fragility curves with empirical curves obtained from a macroseismic approach, highlighting the differences between the methods.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Geosciences, Multidisciplinary

A CARTIS-based method for the rapid seismic vulnerability assessment of minor Italian historical centres

Giuseppe Brando et al.

Summary: This paper introduces a novel predictive model for assessing seismic vulnerability in old Italian minor historical centres, based on eight seismic parameters extracted from the CARTIS form. The methodology, inspired by a previous method calibrated after the 2009 L'Aquila earthquake, was successfully applied to the case study of Grottazzolina in Italy, providing fragility curves as a tool for predicting damage scenarios under different earthquake intensities. The results obtained are valuable for decision-makers in mitigating seismic risks in urban areas.

INTERNATIONAL JOURNAL OF DISASTER RISK REDUCTION (2021)

Article Geosciences, Multidisciplinary

Seismic Vulnerability Assessment and Simplified Empirical Formulation for Predicting the Vibration Periods of Structural Units in Aggregate Configuration

Nicola Chieffo et al.

Summary: The research investigates the vibration period of structural units in a typical masonry aggregate using non-linear static analyses and eigenvalue analysis. The study focuses on modeling techniques in isolated and clustered configurations, as well as predicting vibration periods and deriving fragility functions under different earthquake intensities.

GEOSCIENCES (2021)

Article Engineering, Geological

Analytical fragility curves for masonry school building portfolios in Nepal

Nicola Giordano et al.

Summary: The study highlights the vulnerability of Nepalese school buildings to earthquakes, with most of them built using low-quality unreinforced masonry. It presents fragility curves for three common types of unreinforced masonry, taking into account inter-building, intra-building, and record-to-record variabilities. These fragilities can be used for earthquake risk assessment and intervention prioritization at the country level.

BULLETIN OF EARTHQUAKE ENGINEERING (2021)

Article Nuclear Science & Technology

Identifying significant earthquake intensity measures for evaluating seismic damage and fragility of nuclear power plant structures

Duy-Duan Nguyen et al.

NUCLEAR ENGINEERING AND TECHNOLOGY (2020)

Article Engineering, Geological

Damage assessment of modern masonry buildings after the L'Aquila earthquake

Bruno Calderoni et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2020)

Article Engineering, Geological

Failures of masonry dwelling triggered by East Anatolian Fault earthquakes in Turkey

Burak Yon et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Article Engineering, Geological

Seismic behaviour of ordinary masonry buildings during the 2016 central Italy earthquakes

Luigi Sorrentino et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2019)

Article Engineering, Geological

Empirical fragility curves for masonry buildings after the 2009 L'Aquila, Italy, earthquake

Carlo Del Gaudio et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2019)

Article Engineering, Civil

Derive empirical fragility functions for Nepali residential buildings

Dipendra Gautam et al.

ENGINEERING STRUCTURES (2018)

Article Engineering, Civil

Seismic hazard disaggregation in performance-based earthquake engineering: occurrence or exceedance?

Matthew J. Fox et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2016)

Article Engineering, Civil

The Global Earthquake Model Physical Vulnerability Database

Catalina Yepes-Estrada et al.

EARTHQUAKE SPECTRA (2016)

Article Architecture

Seismic Fragility Assessment of RC Frame-Shear Wall Structures Designed According to the Current Chinese Seismic Design Code

Huanjun Jiang et al.

JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING (2015)

Article Engineering, Chemical

Seismic damage to pipelines in the framework of Na-Tech risk assessment

Giovanni Lanzano et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)

Article Engineering, Geological

REXEL: computer aided record selection for code-based seismic structural analysis

Iunio Iervolino et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2010)

Article Engineering, Geological

Processing Italian damage data to derive typological fragility curves

M. Rota et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2008)

Article Engineering, Geological

Macroseismic and mechanical models for the vulnerability and damage assessment of current buildings

Sergio Lagomarsino et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2006)

Article Construction & Building Technology

Probabilistic demand models and fragility curves for reinforced concrete frames

Sathish K. Ramamoorthy et al.

JOURNAL OF STRUCTURAL ENGINEERING (2006)

Article Engineering, Geological

Fragility curves for reinforced concrete structures in Skopje (Macedonia) region

E Dumova-Jovanoska

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2000)