4.7 Article

Process intensification in the extraction of Mn from spent Li-ion battery simulated leachate via (G1/W+G2)/O microdispersion system with phase inversion

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Process intensification in reactive extraction by phase inversion in gas/liquid/liquid microdispersion system

Jing Tan et al.

Summary: Reactive extraction plays a significant role in various industries, such as wastewater treatment and hydrometallurgy. This study focuses on process intensification in reactive extraction of formic acid, using microdispersed liquid/liquid and gas/liquid/liquid systems with phase inversion. The research reveals that the use of microdispersed systems significantly improves the efficiency compared to millimeter-dispersed emulsion systems. The study also investigates the effects of phase inversion and the addition of microbubbles on mass transfer.

CHEMICAL ENGINEERING SCIENCE (2023)

Article Engineering, Chemical

Effect of lithium ion on the separation of electrode materials in spent lithium ion batteries using froth flotation

Luis Verdugo et al.

Summary: There is a pressing need for the development of a recycling process for spent Lithium-Ion Batteries (LIBs). Froth flotation is considered a cost-effective method for separating graphite from lithium metal oxides, but soluble lithium has been found to significantly affect the separation efficiency.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Engineering, Environmental

Flow regimes, mixing and reaction yield of a mixture in an X-microreactor

S. Tomasi Mason et al.

Summary: This study investigates the impact of flow regimes on the reaction yield in an X-microreactor through experimental flow visualizations and numerical simulations. The results show a remarkable agreement between the experimental and numerical findings. The reaction yield increases with the Reynolds number in the engulfment regime, but reaches a maximum and slightly decreases thereafter. The reaction yield in the X-microreactor is significantly higher than that in a T-microreactor with the same cross-section geometry and operating conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Chemical

Ultrasonic-assisted leaching of valuable metals from spent lithium-ion batteries using organic additives

Shuxuan Yan et al.

Summary: The study successfully achieved sustainable recycling of valuable metals from spent lithium-ion batteries using mixed organic acids and bagasse pith as leachants and reductants, with reduced acid consumption and mild leaching conditions for efficient metal dissolution.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Ultrasound-assisted pressurized liquid extraction of anthocyanins from Aronia melanocarpa pomace

Thalles Allan Andrade et al.

Summary: This study aimed to investigate the optimum conditions for ultrasonic-assisted pressurized liquid extraction of anthocyanins from Aronia melanocarpa pomace. Through optimization of pressure, temperature, ultrasound intensity, and solvent concentration, the total anthocyanin content extracted was increased by 19% at 80 degrees Celsius.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Interfacial mass transfer intensification with highly viscous mixture

Hanguang Xie et al.

Summary: Research shows that mass transfer efficiency decreases with increasing viscosity, posing challenges for industrial processes. By using twin-liquid films with open windows, the velocity and mass transfer rate of highly viscous films are significantly increased. This method enhances mass transfer without additional cost, providing a more efficient solution for highly viscous mixtures.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Engineering, Environmental

Mixing intensification under turbulent conditions in a high pressure microreactor

Fan Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Chemical

Preparation of microdispersed droplets by phase inversion in gas/liquid/liquid microdispersion system

Ya-Ni Ji et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Article Engineering, Chemical

Intensification of high-phase-ratio extraction via microbubble-agitation in gas-liquid-liquid systems

Ting-Fan Feng et al.

CHEMICAL ENGINEERING SCIENCE (2018)

Article Green & Sustainable Science & Technology

Towards a consensus on the circular economy

Vanessa Prieto-Sandoval et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Metallurgy & Metallurgical Engineering

Hydrometallurgical separation of copper and cobalt from lithium-ion batteries using aqueous two-phase systems

Daniela da Silveira Leite et al.

HYDROMETALLURGY (2017)

Review Engineering, Chemical

Recovery and recycling of lithium: A review

Basudev Swain

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Engineering, Chemical

Recovery of cobalt from spent lithium ion batteries by using acidic and basic extractants in solvent extraction process

Rezvan Torkaman et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Article Chemistry, Physical

A closed loop process for recycling spent lithium ion batteries

Eric Gratz et al.

JOURNAL OF POWER SOURCES (2014)

Article Biotechnology & Applied Microbiology

A brief review on hydrometallurgical technologies for recycling spent lithium-ion batteries

Alexandre Chagnes et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2013)

Article Engineering, Chemical

Ultrasound assisted extraction of polyphenols from black chokeberry

Leandro Galvan d'Alessandro et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2012)

Proceedings Paper Chemistry, Analytical

Numerical and Experimental Study on Oil-water Dispersion in New Countercurrent Centrifugal Extractor

Masahiko Nakase et al.

ATALANTE 2012 INTERNATIONAL CONFERENCE ON NUCLEAR CHEMISTRY FOR SUSTAINABLE FUEL CYCLES (2012)

Article Engineering, Environmental

Development of cesium ion extraction process using a slug flow microreactor

Osamu Tamagawa et al.

CHEMICAL ENGINEERING JOURNAL (2011)

Article Metallurgy & Metallurgical Engineering

Recovery of metals from spent lithium-ion battery leach solutions with a mixed solvent extractant system

Y. Pranolo et al.

HYDROMETALLURGY (2010)

Review Metallurgy & Metallurgical Engineering

A review of technologies for the recovery of metals from spent alkaline and zinc-carbon batteries

E. Sayilgan et al.

HYDROMETALLURGY (2009)

Review Engineering, Chemical

Microstructured Reactors for Multiphase Reactions: State of the Art

Madhvanand N. Kashid et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)

Article Chemistry, Physical

High-energy cathode material for long-life and safe lithium batteries

Yang-Kook Sun et al.

NATURE MATERIALS (2009)

Review Chemistry, Physical

A review of processes and technologies for the recycling of lithium-ion secondary batteries

Jinqiu Xu et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Applied

Preparation of microcapsules containing ionic liquids with a new solvent extraction system

Z. Y. Xiang et al.

REACTIVE & FUNCTIONAL POLYMERS (2008)

Article Metallurgy & Metallurgical Engineering

Effect of packing on drop swarms extraction of high viscosity solvents

J Yu et al.

HYDROMETALLURGY (2005)

Article Metallurgy & Metallurgical Engineering

Analysis of breakage functions for liquid-liquid dispersions

MC Ruiz et al.

HYDROMETALLURGY (2004)

Article Metallurgy & Metallurgical Engineering

Mechanism of crud formation in copper solvent extraction

JS Liu et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2002)