4.7 Article

ZnO quantum dots sensitized ZnSnO3 for highly formaldehyde sensing at a low temperature

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Ag nanoparticles decorated ZnSnO3 hollow cubes for enhanced formaldehyde sensing performance at low temperature

Zenghui Sima et al.

Summary: The ZnSnO3 hollow cubes were successfully modified by Ag nanoparticles, which generated Schottky barrier-type junctions and enhanced the sensing performance. The gas-sensing results showed excellent response value (26.7) towards 50 ppm formaldehyde at 100 degrees C, as well as fast response/recovery time (12/18 s), remarkable reproducibility, and outstanding stability. The sensing mechanism was proposed based on the structure of ZnSnO3 hollow cubes and the catalytic activity of Ag NPs. This work confirms that Ag NPs modification is an efficient strategy to improve the sensing properties of ZnSnO3-based gas sensors.

APPLIED SURFACE SCIENCE (2023)

Review Chemistry, Analytical

Environmental Engineering Applications of Electronic Nose Systems Based on MOX Gas Sensors

Ali Khorramifar et al.

Summary: Nowadays, the electronic nose (e-nose) is gaining attention for its ability to detect and differentiate various gases and odors using a limited number of sensors. It has applications in environmental control, process control, and odor-control systems. This paper investigates e-noses and their sensors for detecting environmental contaminants. Among different types of sensors, metal oxide semiconductor (MOX) sensors are suitable for detecting volatile compounds in air at ppm and sub-ppm levels. The advantages and disadvantages of MOX sensors and solutions to the problems are addressed, and research in environmental contamination monitoring is overviewed. The literature review discusses various applications and effective solutions, but the main limitation is the complexity and lack of specific standards, which can be corrected with appropriate data processing methods.

SENSORS (2023)

Article Chemistry, Analytical

In2O3/ZnO S-scheme heterojunction nanocomposite hollow microtubes with highly sensitive response to formaldehyde

Yu Peng et al.

Summary: A highly responsive formaldehyde sensor of In2O3@ZnO derived from MIL-68(In)@ZIF-8 precursor was successfully prepared in this study. By adjusting the ratio of In2O3 and ZnO, the resulting sensor showed significantly improved performance under 100 ppm HCHO at an operating temperature of 220 degrees C, with a detection limit as low as 4 ppb. The sensor also exhibited excellent selectivity (Q >= 10), anti-interference (deviation value <= 3.5%), and long-lasting stability (variation value <= 4%). This work highlights the significant improvement in gas sensing performance through ingenious heterojunction construction.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Review Chemistry, Analytical

Perovskite materials for sensing applications: Recent advances and challenges

The Huy Bui et al.

Summary: Perovskite materials have unique electronic and optical properties, making them highly suitable for electronic and optical devices. They show potential in sensor applications, including photodetection for medical diagnostics and gas sensing for industrial process control and environmental monitoring. However, the challenge lies in their stability in the presence of moisture or oxygen. This study provides a comprehensive evaluation of recent applications of perovskite materials-based sensors, giving valuable insights into their potential for innovative sensor technologies.

MICROCHEMICAL JOURNAL (2023)

Article Chemistry, Analytical

Fabrication of a ppb-level NO2 gas sensor by sensitizing nanobundles assembled by In2O3 nanotubes with TiO2 quantum dots

Dong Wang et al.

Summary: TiO2 QDs-decorated In2O3 composite was synthesized via electrospinning, and SEM and TEM showed the self-assembly of In2O3 nanotubes with uniform dispersion of TiO2 QDs. XPS results revealed increased oxygen deficiency proportion by TiO2 QDs. The sensor based on IT1 sample had a 7.76 times higher response to 10 ppm NO2 (214.3) compared to IT0. The sensor exhibited fast response/recovery characteristics, low detection limit, and high moisture resistance. The enhanced sensing performance was attributed to electronic and geometrical effects. The method of QDs-induced oxygen deficiency and in-depth study of the sensing mechanism provide new perspectives for NO2 gas sensor construction.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Article Chemistry, Analytical

Enhanced xylene detection performance of colloidal quantum dots modified tungsten oxide composites

Xu Li et al.

Summary: Surface modification of WO3 nanoplates with Co3O4 quantum dots significantly improves the gas sensing performance towards xylene due to the stronger oxygen-adsorbing capacity of grooved WO3, the formation of p-n junction between Co3O4 and WO3, and the preferential adsorption of oxygen vacancy-rich Co3O4 on xylene.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Review Chemistry, Inorganic & Nuclear

Design and optimization strategies of metal oxide semiconductor nanostructures for advanced formaldehyde sensors

Chengming Lou et al.

Summary: Formaldehyde sensors are crucial for indoor air quality monitoring and gas leakage detection in industrial areas. The development of high-performance formaldehyde sensors has been greatly facilitated by the research progress in metal oxide semiconductors (MOS) nanomaterials. This review summarizes the recent advances in formaldehyde sensors utilizing MOS nanostructures, emphasizing the structure-property relationships of various MOS types and discussing optimization strategies for sensor performances. The perspectives and challenges in the future development of formaldehyde sensors are also discussed.

COORDINATION CHEMISTRY REVIEWS (2022)

Article Chemistry, Physical

Controlled preparation and gas sensitive properties of two-dimensional and cubic structure ZnSnO3

Ding Wang et al.

Summary: In this study, 2D ZnSnO3 nanosheets were successfully synthesized using a novel method with higher response to formaldehyde (HCHO) and lower operating temperature. A dissolution and recrystallization mechanism was proposed to explain the transformation from 3D nanocubes to 2D nanosheets.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Analytical

ZIF-8 micro-polyhedron MOF-transformed ZnO/ZnFe2O4 nanosheets for highly selective detection of ppb-level isoprene

Xiaxia Xing et al.

Summary: A highly selective and ppb-level isoprene sensing technology has been developed using ZnO/ZnFe2O4 nanosheets. The technology shows a higher response to 1 ppm isoprene than ZnO micro-polyhedrons, and has a low detection limit of 2 ppb and high selectivity even in the presence of multiple interfering gases. This research has potential in upcoming intelligent medical diagnosis.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Review Instruments & Instrumentation

Formaldehyde gas sensing using metal oxide semiconductor: a brief review

Syafiqah Ishak et al.

Summary: This review provides an overview of gas sensors based on zinc oxide (ZnO) and the role of doping in enhancing their gas sensing properties. Doping with other elements improves the performance of the sensors and increases their sensitivity. A specific review on formaldehyde gas sensors based on ZnO metal semiconductors has not been done yet.

SENSOR REVIEW (2022)

Review Chemistry, Analytical

Resistive-Based Gas Sensors Using Quantum Dots: A Review

Ali Mirzaei et al.

Summary: This paper discusses the characteristics of resistive gas sensors based on quantum dots (QDs) and the application of different types of QDs in gas sensors. Due to their extremely small size, QDs show good sensing performance at low temperatures, making them promising materials for reliable and high-output gas-sensing devices.

SENSORS (2022)

Review Engineering, Electrical & Electronic

Nanostructured metal oxide semiconductor-based gas sensors: A comprehensive review

Kurugundla Gopi Krishna et al.

Summary: This article reviews the synthesis methods and sensing properties of nanostructured metal oxide semiconductor-based gas sensors, and summarizes the novel gas sensors and their characteristics under environmental pollution. Prospects for future research on the gas sensing mechanism of metal oxide semiconductors are proposed.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Article Nanoscience & Nanotechnology

SnO2 Quantum Dots-Functionalized MoO3 Nanobelts for High-Selectivity Ethylene Sensing

Wei Jin et al.

Summary: This study developed SnO2 quantum dots-functionalized MoO3 nanobelts for highly selective and sensitive ethylene detection. The prepared 2.5%-SnO2 QDs/MoO3 NBs exhibited excellent response, low detection limit, and selectivity at a low operating temperature.

ACS APPLIED NANO MATERIALS (2022)

Article Chemistry, Analytical

Decoration of laser-ablated ZnO nanoparticles over sputtered deposited SnO2 thin film based formaldehyde sensor

Surajit Das et al.

Summary: The research introduces a synthesis technique to obtain ZnO nanoparticles via laser ablation method and fabricates an n-type ZnO/n-type SnO2 heterojunction sensor, showing excellent sensing performance that can detect as low as 0.25 ppm HCHO.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Quantum dots: Perspectives in next-generation chemical gas sensors - A review

Vardan Galstyan

Summary: Research on quantum dot chemical sensors shows promising sensing performance as the structures are integrated into sensing technologies. Therefore, intensive studies on the influence of synthesis procedures and additive materials on the sensing performance of quantum dots are crucial for further advancements.

ANALYTICA CHIMICA ACTA (2021)

Article Engineering, Electrical & Electronic

Sensing Properties and Mechanism of Gas Sensors Based on Zinc Oxide Quantum Dots

Xunbo Hu et al.

Summary: In this study, quantum dots were used to prepare gas sensing films, and the relationship between grain size and gas sensitivity was investigated. The results showed that the highest sensitivity was achieved when the grain size was close to twice the Debye length.

IEEE SENSORS JOURNAL (2021)

Article Chemistry, Analytical

Perovskite-structured LaCoO3 modified ZnO gas sensor and investigation on its gas sensing mechanism by first principle

Wenbo Qin et al.

Summary: LaCoO3 nanoparticles were synthesized by sol-gel method and modified on the surface of ZnO to prepare LCO/ZnO nanometer flake materials with improved gas-sensitive response. The LCO/ZnO sensor showed significantly enhanced response to ethanol gas, shorter response time and recovery time at an optimal operating temperature of 320 degrees C. Analysis of the sensitization mechanism revealed that the improved sensing performance was attributed to the increase of surface adsorbed oxygen content and the strong catalytic oxidation activity of LCO.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Multidisciplinary

Size-controlled synthesis of porous ZnSnO3 nanocubes for improving formaldehyde gas sensitivity

Jiaoling Zheng et al.

Summary: A formaldehyde chemosensor based on porous ZnSnO3 nanocubes was synthesized, showing high sensitivity and selectivity in detecting formaldehyde. The sensor can detect formaldehyde concentrations as low as 1 ppm, and has a good linear relationship between 1-50 ppm formaldehyde concentrations.

RSC ADVANCES (2021)

Article Materials Science, Multidisciplinary

One-step synthesis of ZnWO4/ZnSnO3 composite and the enhanced gas sensing performance to formaldehyde

Weiwei Guo et al.

MATERIALS LETTERS (2020)

Review Chemistry, Analytical

Spinel-Type Materials Used for Gas Sensing: A Review

Yudong Li et al.

SENSORS (2020)

Article Chemistry, Physical

Constructing chinky zinc oxide hierarchical hexahedrons for highly sensitive formaldehyde gas detection

Shuangming Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

Facile synthesis of Pd-doped ZnSnO3 hierarchical microspheres for enhancing sensing properties of formaldehyde

Shouli Bai et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Chemistry, Analytical

Construction of NiO@ZnSnO3 hierarchical microspheres decorated with NiO nanosheets for formaldehyde sensing

Shouli Bai et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Hybridization of ZnSnO3 and rGO for improvement of formaldehyde sensing properties

Jianhua Sun et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Nanoscience & Nanotechnology

Hollow ZnSnO3 Cubes with Controllable Shells Enabling Highly Efficient Chemical Sensing Detection of Formaldehyde Vapors

Tingting Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Analytical

Spinel ferrite oxide semiconductor gas sensors

Andris Sutka et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Article Nanoscience & Nanotechnology

Rapid selective detection of formaldehyde by hollow ZnSnO3 nanocages

Weiwei Guo et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2013)

Article Materials Science, Multidisciplinary

Synthesis of ZnO nanoparticles by modified polyol method

Buong Woei Chieng et al.

MATERIALS LETTERS (2012)

Article Chemistry, Analytical

Size-controlled synthesis of porous ZnSnO3 cubes and their gas-sensing and photocatalysis properties

Jiarui Huang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Article Chemistry, Physical

Size-Controlled Synthesis of ZnSnO3 Cubic Crystallites at Low Temperatures and Their HCHO-Sensing Properties

Zhengjun Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Article Chemistry, Analytical

Synthesis and gas-sensing properties of ZnSnO3 cubic nanocages and nanoskeletons

Yi Zeng et al.

SENSORS AND ACTUATORS B-CHEMICAL (2009)

Article Chemistry, Multidisciplinary

SnO2 quantum dots and quantum wires:: Controllable synthesis, self-assembled 2D architectures, and gas-sensing properties

Xiangxing Xu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)

Article Chemistry, Analytical

Theory of gas-diffusion controlled sensitivity for thin film semiconductor gas sensor

G Sakai et al.

SENSORS AND ACTUATORS B-CHEMICAL (2001)