4.6 Article

Synthesis of TiO2-(B) Nanobelts for Acetone Sensing

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Recent Advancements in TiO2 Nanostructures: Sustainable Synthesis and Gas Sensing

Gayan W. C. Kumarage et al.

Nanomaterials (2023)

Review Materials Science, Multidisciplinary

Recent Advances in Integrating 1D Nanomaterials into Chemiresistive Gas Sensor Devices

Jiancheng Lin et al.

Summary: The global gas sensor market is experiencing rapid growth due to new regulations and increasing demand. Nanosensors, with their high sensitivity and low power consumption, are considered the next generation of gas sensors. However, the transition of nanosensors from research to commercial products faces challenges in scalability and real-world performance. Recent literature provides insights into addressing these challenges, including the use of various 1D nanomaterials for gas sensing applications. This review highlights the synthesis, sensing performance, and commercial development of these nanomaterials in the past 5 years, emphasizing the scalability achieved through one-step electrodeposition.

ADVANCED MATERIALS TECHNOLOGIES (2023)

Review Chemistry, Physical

Metal Oxide Nanowires Grown by a Vapor-Liquid-Solid Growth Mechanism for Resistive Gas-Sensing Applications: An Overview

Ali Mirzaei et al.

Summary: Metal oxide nanowires grown by the vapor-liquid-solid (VLS) mechanism are among the best candidates for resistive gas sensors. This review article discusses the gas-sensing features of these nanowires, focusing on growth conditions and sensing mechanism. The growth and sensing performance of various metal oxide materials with nanowire morphology are discussed, along with the effects of catalyst type, growth temperature, and other variables on the nanowires.

MATERIALS (2023)

Article Green & Sustainable Science & Technology

Revolutionizing n-type Co3O4 Nanowire for Hydrogen Gas Sensing

Gayan W. C. Kumarage et al.

Summary: This study presents conductometric sensors based on Co3O4 nanowires for hydrogen detection at ppb levels. The nanowires exhibit diameters between 6-50 nm and lengths of 1-5 & mu;m, primarily growing along the (311) direction of spinal Co3O4. Raman investigation reveals characteristic peaks corresponding to symmetric phonon modes of crystalline Co3O4. The sensors show abnormal n-type semiconducting behavior above 300 & DEG;C due to lattice oxygen's involvement in the hydrogen sensing mechanism. Operating at 450 & DEG;C in dry air, the sensor shows a higher response to 100 ppm H-2 compared to other gases and maintains a consistent conductance baseline even under high humidity for 25 days.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2023)

Review Computer Science, Interdisciplinary Applications

Metal oxide semiconductors for gas sensing

Neeraj Goel et al.

Summary: This article comprehensively covers different sensing mechanisms, parameters affecting sensitivity and selectivity, techniques to enhance gas sensing response, and future opportunities and challenges of metal oxide semiconductor-based gas sensors.

ENGINEERING REPORTS (2023)

Article Engineering, Electrical & Electronic

Synthesis of Highly Ordered TiO2 Nanorods on a Titanium Substrate Using an Optimized Hydrothermal Method

Prateek Bindra et al.

Summary: In this study, highly stable and well-oriented one-dimensional (1D) TiO2 nanorods were synthesized on a conductive titanium substrate using an optimized hydrothermal method. By adjusting the reaction parameters, multi-crystalline three-dimensional TiO2 nanoflowers were transformed into single-crystalline 1D TiO2 nanorods. The resulting nanorods were then used for ethanol sensing and exhibited good response performance.

JOURNAL OF ELECTRONIC MATERIALS (2022)

Article Engineering, Environmental

UV illumination-enhanced ultrasensitive ammonia gas sensor based on (001)TiO2/MXene heterostructure for food spoilage detection

Dongzhi Zhang et al.

Summary: The study introduces a method to design sensing materials by growing TiO2 on two-dimensional transition metal carbide to enhance the performance of ammonia sensors. With this design, the sensor shows 34 times higher sensitivity to ammonia, and the composite structure exhibits the highest affinity for adsorbing ammonia.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Analytical

P-Type Metal Oxide Semiconductor Thin Films: Synthesis and Chemical Sensor Applications

Abderrahim Moumen et al.

Summary: This review discusses the synthesis of p-type metal-oxide (p-type MOX) semiconductor thin films for chemical-sensing applications, focusing on CuO, NiO, Co3O4, and Cr2O3. Various techniques for growing p-MOX thin films are reviewed, including physical vapor deposition (PVD) and chemical vapor deposition (CVD). The physicochemical properties, sensing mechanism, and sensing characteristics of the mentioned thin films are discussed. Strategies for improving the sensing capabilities of p-type MOX thin films are also presented.

SENSORS (2022)

Article Chemistry, Analytical

Metal oxide gas sensors for detecting NO2 in industrial exhaust gas: Recent developments

Qingting Li et al.

Summary: This article reviews the NO2 gas sensor based on metal oxides. It discusses the hazards of NO2, the disadvantages of chemiresistive sensors based on metal oxides, and different sensitive materials. It also explores NO2 gas sensors based on metal oxides from various aspects such as morphology, preparation, modification, doping, and composite.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Current state of knowledge on the metal oxide based gas sensing mechanism

Anna Staerz et al.

Summary: This review focuses on the mechanism and surface reactions of metal oxide gas sensors. Recent studies have revealed the complexity of surface reactions and discussed the influence of other adsorbates on sensor response.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Progress towards chemical gas sensors: Nanowires and 2D semiconductors

Vardan Galstyan et al.

Summary: This article provides an overview of the synthesis and sensing properties of metal oxide nanowires and two-dimensional semiconductor nanostructures in gas sensing technologies. By discussing the current achievements and issues, as well as the opportunities and challenges for future fabrication of high performance and small size gas sensing devices, it offers insights into the development of advanced gas detection systems.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Selectivity mechanisms in resistive-type metal oxide heterostructural gas sensors

Janine Walker et al.

Summary: Research on resistive-type semiconducting metal oxide sensors focuses on improving sensor selectivity to differentiate between different gas species, but there are still challenges in applying this technology in real-world settings.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Multidisciplinary

The Combination of Two-Dimensional Nanomaterials with Metal Oxide Nanoparticles for Gas Sensors: A Review

Tao Li et al.

Summary: This review presents recent advances in the fabrication of metal oxide-based gas sensors and 2D nanomaterial-based gas sensors. By combining metal oxides with 2D nanomaterials to construct heterostructures, the fabricated gas sensors exhibit highly sensitive and selective functions. The review discusses the working principles of various gas sensors and factors affecting the sensitivity of gas sensors. Many examples of gas sensor fabrication using metal oxides, 2D materials, and their composites are demonstrated. The review concludes with a summary of the current development and potential research directions in this field.

NANOMATERIALS (2022)

Review Materials Science, Multidisciplinary

Gas Sensors Based on Titanium Oxides (Review)

Simonas Ramanavicius et al.

Summary: This review focuses on the application of nanostructured titanium compounds in gas sensor design, with particular attention to the various modifications of titanium oxides and their suitability for sensor design. It discusses the potential applications of non-stoichiometric titanium oxide and Magneli phase-based layers in gas sensors. The review also highlights the development of synthesis strategies for titanium dioxide and conducting polymer-based composite materials, and their specific application areas. Furthermore, it addresses the tunability of sensitivity and selectivity in titanium compound-based sensing layers. The review provides an overview of recent developments in sensors based on titanium oxides and outlines designs of titanium-based nanomaterials for sensor development.

COATINGS (2022)

Review Materials Science, Ceramics

Influencing parameters in the electrochemical anodization of TiO2 nanotubes: Systematic review and meta-analysis

M. L. Puga et al.

Summary: Comprehensive control of processing techniques is crucial for fine-tuning the morphological features of titanium dioxide nanotube arrays (TNTs). This systematic review and meta-analysis compiled articles published from 2007 to date on the synthesis and growth mechanism of nanotubes fabricated via electrochemical anodization and assessed the potential relationships between anodizing conditions and the resulting structures.

CERAMICS INTERNATIONAL (2022)

Review Engineering, Electrical & Electronic

Nanostructured metal oxide semiconductor-based gas sensors: A comprehensive review

Kurugundla Gopi Krishna et al.

Summary: This article reviews the synthesis methods and sensing properties of nanostructured metal oxide semiconductor-based gas sensors, and summarizes the novel gas sensors and their characteristics under environmental pollution. Prospects for future research on the gas sensing mechanism of metal oxide semiconductors are proposed.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Review Chemistry, Analytical

Low-Dimensional Nanostructures Based on Cobalt Oxide (Co3O4) in Chemical-Gas Sensing

Gayan W. C. Kumarage et al.

Summary: Sensors are in high demand today for monitoring and quantifying hazardous chemicals/gases in the environment due to their high sensitivity, stability, low production costs, ease of maintenance, and portability. One dimensional (1D) metal oxide nanostructured sensors are widely investigated for environmental monitoring, offering superior surface to volume ratio, stability, and cost efficiency in providing information about the presence of chemical species. The utilization of Co3O4 1D nanostructures as active materials for chemical analytes detection has shown promising results over the past decades, thanks to their superior catalytic effect and stability.

CHEMOSENSORS (2021)

Article Chemistry, Physical

Improved acetone sensing characteristics of TiO2 nanobelts with Ag modification

Hao Zhu et al.

Summary: This study focused on the facile synthesis of silver-modified TiO2 nanobelts for enhanced sensitivity to acetone gas, showing excellent acetone sensing properties with high response, short response and recovery time, good linear dependence with the acetone concentration, superior long-term stability, and high selectivity against other gases.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

Enriched Catalytic Activity of TiO2 Nanoparticles Supported by Activated Carbon for Noxious Pollutant Elimination

Suriyaprabha Rajendran et al.

Summary: Cleaning wastewater is a serious issue for scientists and researchers, who have been focusing on using nanocatalysts for the removal of noxious pollutants. By manufacturing TiO2 nanoparticles supported by activated carbon using a cost-effective sonochemical method, the catalytic activity was enhanced. The nanocatalysts showed high efficiency in degrading the organic textile dye RO 84, making them potentially valuable for wastewater treatment in various industries.

NANOMATERIALS (2021)

Review Nanoscience & Nanotechnology

1D Metal Oxide Semiconductor Materials for Chemiresistive Gas Sensors: A Review

Bingxin Yang et al.

Summary: This article discusses the development and advantages of nanoscale chemiresistive gas sensors, focusing on the synthesis and performance optimization of 1D metal oxide-based sensing materials. Integration of 1D sensing nanomaterials into sensor devices and their use in emerging electronic nose applications are also explored.

ADVANCED ELECTRONIC MATERIALS (2021)

Review Nanoscience & Nanotechnology

Gas sensors based on TiO2 nanostructured materials for the detection of hazardous gases: A review

Xu Tian et al.

Summary: TiO2 nanomaterials show great potential in gas sensor applications, with diverse morphologies and unique gas detection characteristics that can be tuned by manufacturing conditions to enhance sensor performance. Various efforts, including functionalization and composite materials, have been made to further improve the gas sensing properties of TiO2-based sensors.

NANO MATERIALS SCIENCE (2021)

Article Chemistry, Physical

High-performance gas sensor array for indoor air quality monitoring: the role of Au nanoparticles on WO3, SnO2, and NiO-based gas sensors

Jinho Lee et al.

Summary: In this study, a 3 x 3 gas sensor array was fabricated to investigate the impact of different combinations of metal oxides and noble metals on gas sensing mechanisms. It was found that dome-like nanostructures and Au NPs decoration can significantly enhance the responses of sensors to target gases.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Physical

A review of hierarchical nanostructures of TiO2: Advances and applications

Shalini Reghunath et al.

Summary: This review summarizes the extensive studies on TiO2 nanostructures with hierarchical morphologies over the past few decades, discussing their various forms and properties in the fields of energy and environment, as well as the influence of these morphologies on material applications.

APPLIED SURFACE SCIENCE ADVANCES (2021)

Article Thermodynamics

Synthesis of TiO2 nanofibers by electrospinning using water-soluble Ti-precursor

Odhiambo Vincent Otieno et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Review Chemistry, Analytical

Nanostructured Metal Oxide-Based Acetone Gas Sensors: A Review

Vahid Amiri et al.

SENSORS (2020)

Article Multidisciplinary Sciences

Controlled Structure and Growth Mechanism behind Hydrothermal Growth of TiO2 Nanorods

Aschariya Prathan et al.

SCIENTIFIC REPORTS (2020)

Review Chemistry, Physical

1D Titanium Dioxide: Achievements in Chemical Sensing

Navpreet Kaur et al.

MATERIALS (2020)

Article Materials Science, Multidisciplinary

One-dimensional anodic TiO2 nanotubes coated by atomic layer deposition: Towards advanced applications

Filip Dvorak et al.

APPLIED MATERIALS TODAY (2019)

Article Chemistry, Physical

Chemical Vapor Deposition of Photocatalytically Active Pure Brookite TiO2 Thin Films

Abdullah M. Alotaibi et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Analytical

Enhanced acetone sensing properties of titanium dioxide nanoparticles with a sub-ppm detection limit

S. T. Navale et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Materials Science, Multidisciplinary

Hydrothermally grown 3D hierarchical TiO2 based on electrochemically anodized 1D TiO2 nanostructure for supercapacitor

Jyoti V. Patil et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)

Article Chemistry, Multidisciplinary

Crystal-Defect-Dependent Gas-Sensing Mechanism of the Single ZnO Nanowire Sensors

Xinyuan Zhou et al.

ACS SENSORS (2018)

Article Chemistry, Analytical

Acetone sensing performances based on nanoporous TiO2 synthesized by a facile hydrothermal method

Nan Chen et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Review Chemistry, Multidisciplinary

Structure, Synthesis, and Applications of TiO2 Nanobelts

Zhenhuan Zhao et al.

ADVANCED MATERIALS (2015)

Article Materials Science, Multidisciplinary

Integration of individual TiO2 nanotube on the chip: Nanodevice for hydrogen sensing

Mihail Enachi et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2015)

Proceedings Paper Engineering, Multidisciplinary

Gas sensor application of hydrothermally growth TiO2 nanorods

Onur Alev et al.

EUROSENSORS 2015 (2015)

Article Chemistry, Multidisciplinary

The Shape of TiO2-B Nanoparticles

Yuri G. Andreev et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Materials Science, Ceramics

Morphology, Chemical Composition and Phase Transformation of Hydrothermal Derived Sodium Titanate

Meng-Jung Li et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

Review Chemistry, Analytical

One-Dimensional Oxide Nanostructures as Gas-Sensing Materials: Review and Issues

Kyoung Jin Choi et al.

SENSORS (2010)

Article Chemistry, Multidisciplinary

An Efficient Photocatalyst Structure: TiO2(B) Nanofibers with a Shell of Anatase Nanocrystals

Dongjiang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Physical

Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide

YV Kolen'ko et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2006)