☆ 4.7 Article

Design of precipitation (γ') strengthened Fe-rich medium entropy alloys

SCRIPTA MATERIALIA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Heterogeneous precipitation strengthened non-equiatomic NiCoFeAlTi medium entropy alloy with excellent mechanical properties

Z. Y. Jia et al.

Summary: In this study, a non-equiatomic Ni46Co24Fe24Al3Ti3 medium entropy alloy was prepared by vacuum suspension melting. After thermo-mechanical processing, the alloy exhibited excellent mechanical properties, which can be attributed to its unique microstructure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optimising the Al and Ti compositional window for the design of γ' (L12)-strengthened Al-Co-Cr-Fe-Ni-Ti high entropy alloys

J. Joseph et al.

Summary: This study analyzed the effect of the relative contents of Al and Ti on the equilibrium phase formation in a novel high entropy superalloy system. Lower Al/Ti ratio improved the mechanical properties of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility

Yongkun Mu et al.

Summary: In this study, a combination of high-density dislocation structures and high-volume-fraction ductile nano-precipitates was successfully achieved in a high-entropy alloy using a three-dimensional printing technique. The resulting structure, known as the dislocation-precipitate skeleton architecture, demonstrated ultra-high tensile strength and significant ductility, which were attributed to the synergistic strengthening of dislocation-precipitation and the evolution of multiple stacking fault structures.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Cr Content in Microstructure, Creep, and Oxidation Resistance of Alumina-Forming Austenitic Alloys at 850-900 °C

Yukinori Yamamoto et al.

Summary: This study evaluates the creep-rupture properties and oxidation behavior of alumina-forming austenitic (AFA) alloys under high-temperature and corrosive environments. By modifying the composition of the alloys, the study aims to optimize their performance. The results show that increasing the Cr content decreases the creep-rupture life and affects the oxidation resistance of the alloys.

METALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the precipitation behavior and mechanical properties of Co-free Ni47-xFe30Cr12Mn8AlxTi3 high-entropy alloys

Jiantao Fan et al.

Summary: This study systematically investigates the precipitation and mechanical behaviors of a Co-free HEA with a dilute amount of Al addition. The results show that the addition of Al affects the formation of different phases and the mechanical properties of the alloy. The study provides valuable insights for developing high-performance Co-free HEAs/MEAs strengthened by nanoprecipitates through composition optimization.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrastrong and ductile additively manufactured precipitation-hardening medium-entropy alloy at ambient and cryogenic temperatures

Ning Yao et al.

Summary: In this work, a high-performance (CoCrNi)(94)Al3Ti3 medium-entropy alloy (MEA) was developed through additive manufacturing and age hardening. The MEA exhibited superior strength-ductility combinations at both ambient and cryogenic temperatures, attributed to its hierarchical microstructure and characteristics of nanoprecipitates.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures

J. X. Hou et al.

Summary: In this study, a novel high-entropy alloy (HEA) was designed using computation-aided thermodynamic modeling, which maintained a stable coherent precipitation microstructure. It was found that increasing the concentration of Cr in the alloy improved both the strength and ductility at room temperature, and eliminated intergranular embrittlement at high temperatures, resulting in a transition from brittleness to ductility.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature oxidation behaviors and mechanisms in newly designed L12-strengthened high-entropy alloys

Jinxiong Hou et al.

Summary: The oxidation behaviors of a newly-designed L1(2)-strengthened multi-component Ni-Co-Fe-Cr-Al-Ti-Nb system were studied, revealing the synergistic alloying effects of Ti, Nb, and Cr on the oxidation resistance. It was found that the doping of Ti deteriorates the oxidation resistance, while substituting Ti with Nb contributes to the formation of a continuous and dense Al2O3 scale, leading to improved oxidation resistance.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Competition between continuous and discontinuous precipitation in L12-strengthened high-entropy alloys

J. Y. C. Fang et al.

Summary: This study systematically investigates the effects of aging temperature, aging time, and grain size on the CP and DP behaviors of L1(2)-strengthened HEAs. The results show that low temperatures favor the DP reaction, while high temperatures facilitate the CP reaction. At intermediate temperatures, both the CP and DP occur simultaneously and compete with each other. Grain size refinement can promote the DP reaction and result in a DP-dominant microstructure.

INTERMETALLICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of the γ′ phase strengthened high-temperature high-entropy alloys with excellent mechanical properties

Chenglei Wang et al.

Summary: In this study, a series of novel gamma' phase strengthened Ti6Al6-based HEAs with six different alloying elements were examined. The presence of impurity phases and the microstructure of the alloys were investigated using various characterization techniques. The addition of W, Mo, and V elements improved the strength-plasticity combination of the HEAs at both room temperature and high temperature. The peak position of the alloys shifted to the left with the addition of W, Mo, and V elements. The coherent relationship between the gamma' precipitates phase and the FCC matrix phase contributed to the increased strength of the alloys without sacrificing plasticity.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Achieving thermally stable nanoparticles in chemically complex alloys via controllable sluggish lattice diffusion

Bo Xiao et al.

Summary: Nanoparticle strengthening is crucial for developing high-performance structural materials, but poor thermal stability and rapid coarsening of nanoparticles often lead to material failures. In this study, we demonstrate a strategy to achieve ultra-stable nanoparticles at high temperatures through controllable sluggish lattice diffusion, which is enabled by the addition of Co element. We also reveal the importance of reduced interdiffusion coefficients and increased incompressibility of Al induced by Co concentration in controlling the sluggish lattice diffusion effect.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

Computational design of thermally stable and precipitation-hardened Al-Co-Cr-Fe-Ni-Ti high entropy alloys

J. Joseph et al.

Summary: By integrating calculated-phase diagrams and a computational framework, a multi-dimensional alloy space with a specific ordered phase for high-temperature structural applications was obtained. The solubility limits of alloying elements at 800 degrees C were defined based on the model, and high-performance high entropy superalloys were developed.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanoprecipitate-Strengthened High-Entropy Alloys

Liyuan Liu et al.

Summary: HEAs can be tuned to a simple phase with unique alloy characteristics, such as high strength and hardness with low ductility in BCC or HCP structures, and a combination of considerable ductility, excellent corrosion and radiation resistance in FCC structures. Precipitation strengthening is an effective method to enhance the strength of HEAs by forming fine and stable nanoscale precipitates. This paper reviews the recent progress in nanoprecipitate-strengthened HEAs and highlights alloy-design strategies and control of nanoscale precipitates.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elemental partitioning as a route to design precipitation-hardened high entropy alloys

Feng He et al.

Summary: This study proposed a framework based on the atom probe tomography (APT) technology to guide the quantitative design of precipitation-hardened high entropy alloys (HEAs), utilizing elemental partitioning to overcome the thermodynamic challenge. The role of Ti/Al ratio in the design of gamma-gamma' HEAs was predicted to be crucial, with higher Ti/Al ratio leading to a stronger alloy when the total content of Ti and Al is fixed. APT and mechanical results validated the feasibility of the framework, providing a new route for designing precipitation-hardened alloys and gaining deeper insight into the design of gamma-gamma' HEAs.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy

Ying Yang et al.

Summary: This study demonstrates a strategy of using nanoprecipitates to enhance the strength of the matrix while modulating its transformation characteristics, leading to simultaneous improvements in tensile strength and ductility in a single alloy.

NATURE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition

Xueling Huang et al.

Summary: By doping Al and Ti, the high-entropy alloy exhibits enhanced strength-ductility synergy with uniformly distributed, high-content nanoprecipitates. The formation of various dislocation substructures and crossed stacking faults contributes to the strain hardening of the high-entropy alloy.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Towards superior mechanical properties of hetero-structured high-entropy alloys via engineering multicomponent intermetallic nanoparticles

T. Yang et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Promising properties and future trend of eutectic high entropy alloys

Yiping Lu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature

J. Joseph et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures

Lei Fan et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the effect of Fe in L12 strengthened Al-Co-Cr-Fe-Ni-Ti complex concentrated alloy

Shaik Adil et al.

MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A scrap-tolerant alloying concept based on high entropy alloys

M. R. Barnett et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nano-graining a particle-strengthened high-entropy alloy

Dong-Hyun Lee et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy

T. Yang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys

Da Chen et al.

INTERMETALLICS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

The chemical ordering and elasticity in FeCoNiAl1-xTix high-entropy alloys

Shuo Huang

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure

S. W. Wu et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates

Y. L. Zhao et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A high temperature nanoindentation study

Dong-Hyun Lee et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

Yao-Jian Liang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of Ni:Co ratio on the elemental phase partitioning in γ-γ′ Ni-Co-Al-Ti-Cr alloys

S. C. H. Llewelyn et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of L12-ordered Ni3(Al,Ti)-strengthened alumina-forming austenitic stainless steel alloys

Yukinori Yamamoto et al.

SCRIPTA MATERIALIA (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.