相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Economic and environmental analysis of plastics pyrolysis after secondary sortation of mixed plastic waste
Daniel G. Kulas et al.
JOURNAL OF CLEANER PRODUCTION (2023)
Economic Viability and Engine Performance Evaluation of Biodiesel Derived from Desert Palm Date Seeds
Mohammed Kamil et al.
ENERGIES (2023)
Characterization of pyrolysis oil produced from organic and plastic wastes using an auger reactor
M. M. Hasan et al.
ENERGY CONVERSION AND MANAGEMENT (2023)
Distilled Waste Plastic Oil as Fuel for a Diesel Engine: Fuel Production, Combustion Characteristics, and Exhaust Gas Emissions
Weerachai Arjharn et al.
ACS OMEGA (2022)
Automobile fuels (diesel and petrol) from plastic pyrolysis oil-Production and characterisation
M. I. Jahirul et al.
ENERGY REPORTS (2022)
Detailed Analysis of PAH Formation, Toxicity and Regulated Pollutants in a Diesel Engine Running on Diesel Blends with n-Propanol, n-Butanol and n-Pentanol
Nadir Yilmaz et al.
ENERGIES (2022)
Comparative techno-economic evaluation of potential processing schemes for petroleum crude oil distillation
Sunil Kumar et al.
RESULTS IN ENGINEERING (2022)
Thermochemical conversion of plastic waste to fuels: a review
Sonil Nanda et al.
ENVIRONMENTAL CHEMISTRY LETTERS (2021)
Techno-Economic and Life Cycle Assessment of Pyrolysis of Unsegregated Urban Municipal Solid Waste in India
Vibhuti Chhabra et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
Study on the performance and emission characteristics of pyrolytic waste plastic oil operated CI engine using response surface methodology
Amar Kumar Das et al.
JOURNAL OF CLEANER PRODUCTION (2021)
PAH and POP Presence in Plastic Waste and Recyclates: State of the Art
Juan A. Conesa et al.
ENERGIES (2021)
Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics
R. K. Singh et al.
FUEL (2020)
Removal of microplastics from the environment. A review
Mohsen Padervand et al.
ENVIRONMENTAL CHEMISTRY LETTERS (2020)
Optimization of Engine Parameters and Ethanol Fuel Additive of a Diesel Engine Fuelled with Waste Plastic Oil Blended Diesel
Amar Kumar Das et al.
PROCESS INTEGRATION AND OPTIMIZATION FOR SUSTAINABILITY (2020)
Numerical simulation of diesel engine using waste plastic oil blends
Mohanraj Chandran et al.
SN APPLIED SCIENCES (2020)
Energy, exergy, performance, emission and combustion characteristics of diesel engine using new series of non-edible biodiesels
M. N. Nabi et al.
RENEWABLE ENERGY (2019)
Renewable energy in Bangladesh: Status and prospects
M. N. Uddin et al.
2ND INTERNATIONAL CONFERENCE ON ENERGY AND POWER (ICEP2018) (2019)
Combustion and emission characteristics of diesel engine fuelled with waste plastic oil - a review
A. Pakiya Pradeep et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
Thermo-economic analysis of diesel engine fueled with blended levels of waste cooking oil biodiesel in diesel fuel
Farshad Meisami et al.
BIOFUELS-UK (2018)
Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment
Antzela Fivga et al.
ENERGY (2018)
Valorization of packaging plastic waste by slow pyrolysis
Pallab Das et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Microplastic pollution in China's inland water systems: A review of findings, methods, characteristics, effects, and management
Kai Zhang et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Study of engine performance, emission and combustion characteristics fueled with diesel-like fuel produced from waste engine oil and waste plastics
V. Edwin Geo et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2018)
Investigation on performance, emission and combustion characteristics of variable compression engine fuelled with diesel, waste plastics oil blends
S. Ananthakumar et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Alternative Diesel from Waste Plastics
Stella Bezergianni et al.
ENERGIES (2017)
The utilisation of oils produced from plastic waste at different pyrolysis temperatures in a DI diesel engine
Ioannis Kalargaris et al.
ENERGY (2017)
Extraction and characterization of waste plastic oil (WPO) with the effect of n-butanol addition on the performance and emissions of a DI diesel engine fueled with WPO/diesel blends
D. Damodharan et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Ioannis Kalargaris et al.
FUEL PROCESSING TECHNOLOGY (2017)
Effect of plastic waste types on pyrolysis liquid oil
R. Miandad et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2017)
Fuel production, performance, and emission of a CI engine using waste plastics oil
Adun Janyalertadun et al.
WORLD JOURNAL OF ENGINEERING (2017)
A detailed investigation of the combustion characteristics of a DI diesel engine fuelled with plastic oil and rice bran methyl ester
Viswanath K. Kaimal et al.
JOURNAL OF THE ENERGY INSTITUTE (2017)
Performance and emission characteristics of diesel engine operated on plastic pyrolysis oil with exhaust gas recirculation
M. Paul Daniel et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2017)
An experimental study on usage of plastic oil and B20 algae biodiesel blend as substitute fuel to diesel engine
D. K. Ramesha et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2016)
Investigation on environmental factors of waste plastics into oil and its emulsion to control the emission in DI diesel engine
P. Senthil Kumar et al.
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2016)
Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene
Achyut K. Panda et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2016)
Performance, emission and combustion characteristics of a IDI engine running on waste plastic oil
C. A. Rinaldini et al.
FUEL (2016)
An investigation on the effects of using DEE additive in a DI diesel engine fuelled with waste plastic oil
Viswanath K. Kaimal et al.
FUEL (2016)
Polycyclic aromatic hydrocarbons in diesel emission, diesel fuel and lubricant oil
Carolina Vieira de Souza et al.
FUEL (2016)
Combustion analysis of pyrolysis end of life plastic fuel blended with ultra low sulfur diesel
Preetham Reddy Churkunti et al.
FUEL PROCESSING TECHNOLOGY (2016)
Experimental evaluation of waste plastic oil and its blends on a single cylinder diesel engine
Rajan Kumar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Plastics to fuel: a review
Bidhya Kunwar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
A study on synthesis of energy fuel from waste plastic and assessment of its potential as an alternative fuel for diesel engines
Viswanath K. Kaimal et al.
WASTE MANAGEMENT (2016)
Effect of Jatropha methyl ester on waste plastic oil fueled DI diesel engine
P. Senthilkumar et al.
JOURNAL OF THE ENERGY INSTITUTE (2016)
Experimental investigation of performance, emission and combustion characteristics of waste plastic pyrolysis oil blended with diethyl ether used as fuel for diesel engine
J. Devaraj et al.
ENERGY (2015)
A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends
Viswanath K. Kaimal et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Imtiaz Ahmad et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Engine Performance and Emission Characteristics of Plastic Oil Produced from Waste Polyethylene and Its Blends with Diesel Fuel
Ceyla Gungor et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Chemical Catalyzed Recycling of Polymers: Catalytic Conversion of PE, PP and PS into Fuels and Chemicals over H-Y
Laura C. Lerici et al.
INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2013 (2015)
Numerical simulation of Diesel injector internal flow field
Ehsanallah Tahmasebi et al.
70TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION, ATI2015 (2015)
Physio-chemical assessment of beauty leaf (Calophyllum inophyllum) as second-generation biodiesel feedstock
M. I. Jahirul et al.
ENERGY REPORTS (2015)
Feasibility Study for Catalytic Cracking of Waste Plastic to Produce Fuel Oil with Reference to Malaysia and Simulation using ASPEN Plus
J. N. Sahu et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2014)
The effects of using diethylether as additive on the performance and emissions of a diesel engine fuelled with CNG
Murat Karabektas et al.
FUEL (2014)
New Technologies To Enhance the Distillation Yield of Petroleum Fractionation
Miguel Bagajewicz et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Plastic Pollution in the World's Oceans: More than 5 Trillion Plastic Pieces Weighing over 250,000 Tons Afloat at Sea
Marcus Eriksen et al.
PLOS ONE (2014)
Pyrolysis technologies for municipal solid waste: A review
Dezhen Chen et al.
WASTE MANAGEMENT (2014)
Fuel Production from LDPE Plastic Waste over Natural Zeolite Supported Ni, Ni-Mo, Co and Co-Mo Metals
Wiwin Sriningsih et al.
4TH INTERNATIONAL CONFERENCE ON SUSTAINABLE FUTURE FOR HUMAN SECURITY SUSTAIN 2013 (2014)
Combined effects of thermal barrier coating and blending with diesel fuel on usability of vegetable oils in diesel engines
Huseyin Aydin
APPLIED THERMAL ENGINEERING (2013)
Performance and emission analysis of blends of waste plastic oil obtained by catalytic pyrolysis of waste HDPE with diesel in a CI engine
Sachin Kumar et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Studying combustion and cyclic irregularity of diethyl ether as supplement fuel in diesel engine
D. C. Rakopoulos et al.
FUEL (2013)
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Maite Artetxe et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
COMPUTATIONAL FLUID DYNAMICS SIMULATION OF THE COMBUSTION PROCESS, EMISSION FORMATION AND THE FLOW FIELD IN AN IN-DIRECT INJECTION DIESEL ENGINE
Ramin Barzegar et al.
THERMAL SCIENCE (2013)
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
Seyed Mousa Fakhr Hoseini et al.
JOURNAL OF CHEMISTRY (2013)
Optimisation of Bio-oil Extraction Process from Beauty Leaf (Calophyllum inophyllum) Oil Seed as a Second Generation Biodiesel Source
M. Jahirul et al.
5TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING (2013)
Catalyst evaluation for waste cooking oil hydroprocessing
Stella Bezergianni et al.
FUEL (2012)
Catalytic stepwise pyrolysis of packaging plastic waste
A. Lopez-Urionabarrenechea et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Performance, emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends
K. Muralidharan et al.
APPLIED ENERGY (2011)
RECOVERY OF HYDROCARBON LIQUID FROM WASTE HIGH DENSITY POLYETHYLENE BY THERMAL PYROLYSIS
Sachin Kumar et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine
M. Mani et al.
ENERGY (2011)
The influence of n-butanol/diesel fuel blends utilization on a small diesel engine performance and emissions
Oguzhan Dogan
FUEL (2011)
Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine
D. H. Qi et al.
RENEWABLE ENERGY (2011)
Application of artificial neural networks for the prediction of performance and exhaust emissions in SI engine using ethanol- gasoline blends
M. Kiani Deh Kiani et al.
ENERGY (2010)
An experimental investigation on a DI diesel engine using waste plastic oil with exhaust gas recirculation
M. Mani et al.
FUEL (2010)
Characteristics of polycyclic aromatic hydrocarbons emissions of diesel engine fueled with biodiesel and diesel
Chao He et al.
FUEL (2010)
Experimental investigation of the effects of diesel-like fuel obtained from waste lubrication oil on engine performance and exhaust emission
Orhan Arpa et al.
FUEL PROCESSING TECHNOLOGY (2010)
Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products-A world prospective
Achyut K. Panda et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
M. Mani et al.
APPLIED THERMAL ENGINEERING (2009)
Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine
P. K. Sahoo et al.
FUEL (2009)
Experimental investigation on a CI engine using orange oil and orange oil with DEE
K. Purushothaman et al.
FUEL (2009)
Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time
Jude A. Onwudili et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Economics of willow pyrolysis after phytoextraction
Theo Thewys et al.
INTERNATIONAL JOURNAL OF PHYTOREMEDIATION (2008)
Fast pyrolysis of cassava rhizome in the presence of catalysts
Adisak Pattiya et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2008)
Influence of injection timing on the exhaust emissions of a dual-fuel CI engine
Cenk Sayin et al.
RENEWABLE ENERGY (2008)
The use of tyre pyrolysis oil in diesel engines
S. Murugan et al.
WASTE MANAGEMENT (2008)
Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor
G. Elordi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system
J. Aguado et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
Combustion characteristics of a compression-ignition engine fuelled with diesel-dimethoxy methane. blends under various fuel injection advance angles
Y Ren et al.
APPLIED THERMAL ENGINEERING (2006)
Continuous flow cracking of waste plastics
J Walendziewski
FUEL PROCESSING TECHNOLOGY (2005)
Combustion-derived polycyclic aromatic hydrocarbons in the environment - A review
ALC Lima et al.
ENVIRONMENTAL FORENSICS (2005)
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
A Demirbas
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Thermal and thermo-catalytic degradation of high-density polyethylene waste
N Miskolczi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
An experimental investigation of the effect of the injection pressure on engine performance and exhaust emission in indirect injection diesel engines
I Celikten
APPLIED THERMAL ENGINEERING (2003)
Optimization of existing heat-integrated refinery distillation systems
M Gadalla et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2003)
Waste plastics as supplemental fuel in the blast furnace process: improving combustion efficiencies
D Kim et al.
JOURNAL OF HAZARDOUS MATERIALS (2002)
Comparison of plastic types for catalytic degradation of waste plastics into liquid product with spent FCC catalyst
KH Lee et al.
POLYMER DEGRADATION AND STABILITY (2002)
Engine fuel derived from waste plastics by thermal treatment
J Walendziewski
FUEL (2002)
Effects of fuel cetane number and aromatics on combustion process and emissions of a direct-injection diesel engine
Y Kidoguchi et al.
JSAE REVIEW (2000)
Catalytic degradation of high density polyethylene and polypropylene into liquid fuel in a powder-particle fluidized bed
GH Luo et al.
POLYMER DEGRADATION AND STABILITY (2000)
Investigation on emission characteristics of a compression ignition engine with oxygenated fuels and exhaust gas recirculation
HW Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2000)
分享论文
