☆ 4.7 Article

Probability Quantification of GSI and D in Hoek-Brown Criterion Using Bayesian Inversion and Ultrasonic Test in Rock Mass

ROCK MECHANICS AND ROCK ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Geological

Experimental Evaluation of the Scale of Fluctuations in Rock Using Ultrasonic Tests

Jian Liu et al.

Summary: The properties of rock vary with spatial location, and spatial variability is a critical source of uncertainty in rock engineering. However, there is a lack of research on the key parameter characterizing spatial variability - the scale of fluctuation. This study proposes a method to evaluate the scale of fluctuation in rocks based on compressive wave velocity and provides valuable insights for reliability evaluations in rock engineering projects.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2023)

添加到收藏夹

Article Engineering, Geological

Stability of complex rock tunnel face under seepage flow conditions using a novel equivalent analytical model

Jianhong Man et al.

Summary: A novel equivalent analytical model is proposed in this paper to address the impact of longitudinally inclined layered rock masses under seepage flow conditions on tunnel face stability. The model directly considers the seepage force as a body force and combines the mirror-image method, layered discretization technique, limit analysis method, and Hoek-Brown yield criterion to derive an analytical expression for stability determination. The main factors affecting tunnel face stability, such as the inclination angle of the flow line, the inclination angle of the rock layer, hydraulic conductivity, rock quality, excavation disturbed zone (EDZ), and the groundwater table height, are analyzed. The calculated diagrams have a certain guiding effect on tunnel construction.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2023)

添加到收藏夹

Article Engineering, Environmental

Quantification of the GSI and D values in the Hoek-Brown criterion using the rock quality designation (RQD) and discontinuity surface condition rating (SCR)

Kaizong Xia et al.

Summary: This study focuses on quantitatively determining the parameters in the Hoek-Brown failure criterion to increase the design reliability of rock engineering projects. By establishing quantitative expressions and methods for estimating GSI and D values, an improved H-B failure criterion was developed and successfully tested in the Chengchao Iron Mine in China. The improved method provides a new way to estimate the mechanical parameters of rock masses when test data is insufficient.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)

添加到收藏夹

Article Engineering, Geological

Bayesian Estimation for Probability Distribution of Rock's Elastic Modulus Based on Compression Wave Velocity and Deformation Warning for Large Underground Cavern

Jian Liu et al.

Summary: The elastic modulus of rock is a crucial parameter in predicting excavation deformation, designing support, and analyzing the stability of underground engineering. A new method based on Bayesian theory is developed to infer the probability distribution of the rock elastic modulus using the compression wave velocity of rock, overcoming the limitations of traditional statistical methods. The method is validated using test data from the Firuzkoy area of Istanbul and compared with a traditional regression model to demonstrate its advantage under small sample conditions. The method is also applied to obtain the probability distribution of the elastic modulus at the Yingliangbao hydropower station, and safety warning indexes are formulated based on the displacement probability quantile.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Predictions of Deep Excavation Responses Considering Model Uncertainty: Integrating BiLSTM Neural Networks with Bayesian Updating

Yuanqin Tao et al.

Summary: This paper proposes an efficient Bayesian updating approach for excavation responses by considering the uncertainties of soil properties and the calculation model. The use of bidirectional long short-term memory (BiLSTM) neural networks improves computational efficiency. The results from an excavation project in Taipei demonstrate the success of the proposed approach in reducing uncertainties and providing accurate predictions of excavation responses.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2022)

添加到收藏夹

Article Engineering, Geological

Bayesian Estimation of Rock Mechanical Parameter and Stability Analysis for a Large Underground Cavern

Quan Jiang et al.

Summary: A Bayesian approach is developed and verified in this paper to estimate the mechanical parameters distribution of rock by integrating limited field data and prior knowledge. The distribution of rock mass parameters is obtained and used to analyze the random field and excavation-induced deformation of a large cavern. The probabilistic characterization of the failure of surrounding rock provides reference for the reliability design of rock support in underground engineering.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2022)

添加到收藏夹

Article Engineering, Geological

Estimating the geological strength index and disturbance factor in the Hoek-Brown criterion using the acoustic wave velocity in the rock mass

Kaizong Xia et al.

Summary: This study develops a method to estimate GSI and D values using acoustic wave velocity, and proposes a new method for determining the mechanical parameters of the rock mass based on these improved values. The analysis results show that the method accurately reflects the factors affecting rock mass quality and disturbance, and its reliability is verified in practical engineering.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Engineering, Geological

Run-out distance exceedance probability evaluation and hazard zoning of an individual landslide

Xiaoping Sun et al.

Summary: The paper proposes a probabilistic method for predicting landslide run-out distance, successfully assessing exceedance probability at different locations with improved computational efficiency and reliability, which can be used for landslide hazard zoning.

LANDSLIDES (2021)

添加到收藏夹

Article Engineering, Geological

From probabilistic back analyses to probabilistic run-out predictions of landslides: A case study of Heifangtai terrace, Gansu Province, China

Xiaoping Sun et al.

Summary: A novel framework combining probabilistic back analyses and predictions is proposed for reliable landslide run-out distance predictions. The method calibrates input parameters probabilistically and then utilizes them for forward predictions, generating exceedance probability curves and hazard zoning maps. The use of surrogate models significantly enhances computational efficiency and the proposed methodology is demonstrated in a case study of two sequential landslides in Gansu Province, China.

ENGINEERING GEOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

Bayesian inference of spatially varying parameters in soil constitutive models by using deformation observation data

Yuan-qin Tao et al.

Summary: This study introduces a data-driven approach to infer the spatially varying parameters of soil constitutive models from limited field observations, improving settlement predictions. The results indicate that site-specific spatial variability can be reasonably estimated and settlement predictions can be enhanced by utilizing the inferred parameter field. Additionally, the selection of important variables, observation spacing, and number of observations all have effects on parameter estimations and settlement predictions.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

添加到收藏夹

Article Engineering, Environmental

Correlations between rock mass intactness index (Kv) and other rock mass classification indices (RMR89 system and GSI)

Yanhui Song et al.

Summary: This paper explores the relationship between rock mass integrity, quality, and strength, describing a classification index and scheme for rock mass integrity. The study finds correlations between various indices, suggesting that alternative indices can be used for rock mass quality evaluation in the absence of a specific integrity index. However, further research is needed to validate and supplement the results presented in this study.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Probabilistic back analysis for improved reliability of geotechnical predictions considering parameters uncertainty, model bias, and observation error

Zhibin Li et al.

Summary: The Bayesian theory provides a method for updating uncertainties in geotechnical systems, with the new probabilistic back analysis method considering all uncertainties and incorporating multiple observations to improve reliability. The posterior distributions of uncertain variables are derived through MCMC simulation based on the Hamiltonian Monte Carlo algorithm, showing efficiency and effectiveness in updating statistical information stage by stage.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Comparison of different approaches and development of improved formulas for estimating GSI

Yanhui Song et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Engineering, Geological

Estimation of rock mass properties in excavation damage zones of rock slopes based on the Hoek-Brown criterion and acoustic testing

Jianhua Yang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

添加到收藏夹

Article Construction & Building Technology

Estimation of geological strength index through a Bayesian sequential updating approach integrating multi-source information

Wenmin Yao et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Geological

Excavation Optimization and Stability Analysis for Large Underground Caverns Under High Geostress: A Case Study of the Chinese Laxiwa Project

Quan Jiang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Bayesian updating for progressive excavation of high rock slopes using multi-type monitoring data

Yang Sun et al.

ENGINEERING GEOLOGY (2019)

添加到收藏夹

Article Construction & Building Technology

Quantitative assessments of the correlations between rock mass rating (RMR) and geological strength index (GSI)

Qi Zhang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

添加到收藏夹

Article Construction & Building Technology

Prediction of time-dependent tunnel convergences using a Bayesian updating approach

Xianda Feng et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Geological

Composite Geological Strength Index Approach with Application to Hydrothermal Vein Networks and Other Intrablock Structures in Complex Rockmasses

Jennifer J. Day et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Slope reliability and back analysis of failure with geotechnical parameters estimated using Bayesian inference

Luis-Fernando Contreras et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Environmental

Proposing a new model to approximate the elasticity modulus of granite rock samples based on laboratory tests results

Katayoun Behzadafshar et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)

添加到收藏夹

Article Engineering, Geological

Bayesian updating of slope reliability in spatially variable soils with in-situ measurements

Shui-Hua Jiang et al.

ENGINEERING GEOLOGY (2018)

添加到收藏夹

Article Engineering, Geological

Comparison of different calculation methods of Geological Strength Index (GSI) in a specific underground construction site

Gabor Somodi et al.

ENGINEERING GEOLOGY (2018)

添加到收藏夹

Article Engineering, Geological

Improving the Hoek-Brown criterion based on the disturbance factor and geological strength index quantification

Wenkai Feng et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

添加到收藏夹

Article Engineering, Geological

An Improved Rock Mass Characterization Method Using a Quantified Geological Strength Index and Synthetic Rock Mass Model

Yabing Zhang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

The effects of blast damage zone thickness on rock slope stability

Huihui Zheng et al.

ENGINEERING GEOLOGY (2018)

添加到收藏夹

Article Construction & Building Technology

Elastic modulus deterioration index to identify the loosened zone around underground openings

Ding-ping Xu et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Geological

Rock mass characterization for shallow granite by integrating rock core indices and seismic velocity

Daming Lin et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

添加到收藏夹

Article Engineering, Geological

Back analysis of a large landslide in a flysch rock mass

Matteo Berti et al.

LANDSLIDES (2017)

添加到收藏夹

Article Engineering, Geological

Determination of geological strength index of jointed rock mass based on image processing

Kunui Hong et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Geological

Nonlinear shear behavior of rock joints using a linearized implementation of the Barton-Bandis model

Simon Heru Prassetyo et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An efficient probabilistic back-analysis method for braced excavations using wall deflection data at multiple points

Xiao-Hui Qi et al.

COMPUTERS AND GEOTECHNICS (2017)

添加到收藏夹

Article Engineering, Geological

Quantification of prior knowledge in geotechnical site characterization

Zijun Cao et al.

ENGINEERING GEOLOGY (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Markov chain Monte Carlo simulation using the DREAM software package: Theory, concepts, and MATLAB implementation

Jasper A. Vrugt

ENVIRONMENTAL MODELLING & SOFTWARE (2016)

添加到收藏夹

Article Engineering, Geological

Updating performance of high rock slopes by combining incremental time-series monitoring data and three-dimensional numerical analysis

X. Y. Li et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

添加到收藏夹

Article Engineering, Environmental

An adaptive neuro-fuzzy inference system for predicting unconfined compressive strength and Young's modulus: a study on Main Range granite

Danial Jahed Armaghani et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

添加到收藏夹

Article Engineering, Geological

A Comparative Evaluation of Stress-Strain and Acoustic Emission Methods for Quantitative Damage Assessments of Brittle Rock

Jin-Seop Kim et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

添加到收藏夹

Article Engineering, Geological

Probabilistic prediction of rainfall-induced slope failure using a mechanics-based model

J. Zhang et al.

ENGINEERING GEOLOGY (2014)

添加到收藏夹

Article Engineering, Geological

Back analysis of closure parameters of Panet equation and Burger's model of Babolak water tunnel conveyance

Ebrahim Asadollahpour et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

添加到收藏夹

Article Geochemistry & Geophysics

Bayesian inversion for finite fault earthquake source models I-theory and algorithm

S. E. Minson et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2013)

添加到收藏夹

Article Engineering, Geological

Bayesian Updating of Soil Parameters for Braced Excavations Using Field Observations

C. Hsein Juang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2013)

添加到收藏夹

Article Engineering, Geological

Shear strength criteria for rock, rock joints, rockfill and rock masses: Problems and some solutions

Nick Barton

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2013)

添加到收藏夹

Article Computer Science, Artificial Intelligence

An optimizing BP neural network algorithm based on genetic algorithm

Shifei Ding et al.

ARTIFICIAL INTELLIGENCE REVIEW (2011)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Effect of rock mass disturbance on the stability of rock slopes using the Hoek-Brown failure criterion

A. J. Li et al.

COMPUTERS AND GEOTECHNICS (2011)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Back analysis of slope failure with Markov chain Monte Carlo simulation

L. L. Zhang et al.

COMPUTERS AND GEOTECHNICS (2010)

添加到收藏夹

Article Engineering, Geological

Efficient Probabilistic Back-Analysis of Slope Stability Model Parameters

J. Zhang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2010)

添加到收藏夹

Article Engineering, Geological

Practical Estimates of Tensile Strength and Hoek-Brown Strength Parameter mi of Brittle Rocks

M. Cai

ROCK MECHANICS AND ROCK ENGINEERING (2010)

添加到收藏夹

Article Engineering, Geological

Indirect estimation of the rock deformation modulus based on polynomial and multiple regression analyses of the RMR system

Byung-Sik Chun et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

添加到收藏夹

Article Construction & Building Technology

A new rational method for calculating the GSI

G. Russo

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Geological

Empirical estimation of rock mass modulus

E Hoek et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2006)

添加到收藏夹

Article Engineering, Geological

Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system

M Cai et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

添加到收藏夹

Article Engineering, Geological

Some new Q-value correlations to assist in site characterisation and tunnel design

N Barton

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.