☆ 4.7 Article

CFD coupled heat and mass transfer simulation of pineapple drying process using mixed-mode solar dryers integrated with flat plate and finned collector

RENEWABLE ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Food Science & Technology

Design and Fabrication of Solar Dryer System for Food Preservation of Vegetables or Fruit

Ankit Kumar et al.

Summary: Food preservation is a long-standing practice with various techniques such as drying, freezing, and pickling. Food spoilage is caused by microorganisms and enzymes in the food. Drying is an effective method for reducing humidity. A mathematical model for solar dryer design was developed in this study.

JOURNAL OF FOOD QUALITY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Simulation of mixed-mode solar dryer with vertical air distribution channel

Senay Teshome Sileshi et al.

Summary: The study analyzed the flow behavior of drying air and its impact on product quality, finding that conventional dryers have non-uniform air flow. Computational Fluid Dynamics (CFD) was used to analyze transient flow behavior, and the results were in reasonable agreement with experiments. The use of a vertical air distribution channel improved the uniformity of drying air, enhancing the drying process.

HELIYON (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical and experimental analysis of heat and mass transfer in the drying process of the solar drying system

Mehmet Das et al.

Summary: Designing a solar food drying system is crucial for performance, with the use of air-heated solar collectors becoming more common. Modelling dryer room temperature and pressure distribution is essential for system design. Numerical analysis was conducted on drying air speed, temperature, and product moisture content values, using polynomial equations and COMSOL Multiphysics program for modelling.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2021)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic performance of a solar air heater with staggered C-shape finned absorber plate

A. Saravanan et al.

Summary: The experimental investigation focused on the thermo-hydraulic performance of a solar air heater with staggered multiple C-shape perforated and non-perforated finned absorber plate. Results indicated that the perforated finned absorber plate outperformed the smooth plate absorber plate, especially with relative pitch to gap ratio 3.8 and relative height ratio 0.6.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

A novel active-mode indirect solar dryer for agricultural products: Experimental evaluation and economic feasibility

Sukhmeet Singh et al.

Summary: A novel active-mode indirect solar dryer with highly efficient through-flow evacuated tube collector for air heating was designed. The dryer can dry fenugreek leaves and turmeric in semi-continuous mode and shows good economic viability.

ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Drying characteristics, energetic and exergetic investigation during mixed-mode solar drying of pineapple slices at varied air mass flow rates

Poonam Rani et al.

Summary: This study focused on evaluating the energy and exergy flow in a mixed-mode solar dryer during the drying of pineapple slices using the first and second laws of thermodynamics. Results showed that increasing air mass flow rate could enhance the useful heat gain by air, reduce thermal losses from the collector, and improve efficiency, leading to better drying performance.

RENEWABLE ENERGY (2021)

添加到收藏夹

Review Energy & Fuels

Importance of integrated CFD and product quality modeling of solar dryers for fruits and vegetables: A review

Eshetu Getahun et al.

Summary: This paper summarizes recent advances and challenges in solar drying of fruit and vegetable products, discussing design and optimization of solar dryers, as well as critical parameters affecting system performance. Potential lies in utilizing computational fluid dynamics (CFD) to predict product quality in addition to airflow, heat, and moisture transfer characteristics for optimal solar dryer performance.

SOLAR ENERGY (2021)

添加到收藏夹

Article Agriculture, Multidisciplinary

Optimization of process parameters and numerical modeling of heat and mass transfer during simulated solar drying of paddy

Aprajeeta Jha et al.

Summary: The present study aimed to optimize the process parameters for solar drying of paddy and developed a 3-dimensional, multi-layered finite element model for predicting moisture and temperature profile. The optimized parameters for drying paddy were found to be 700 W, 3.5 m/s, and 12% moisture content, resulting in optimal temperature, milling yield, and drying time. The developed model successfully accounted for the diffusion coefficients of endosperm, bran, and husk layers to standardize the hybrid solar drying process.

COMPUTERS AND ELECTRONICS IN AGRICULTURE (2021)

添加到收藏夹

Article Food Science & Technology

Development, validation, and comparison of FE modeling and ANN model for mixed-mode solar drying of potato cylinders

Kshanaprava Dhalsamant

Summary: This study developed a finite element model using COMSOL Multiphysics software to predict the temperature and moisture ratio of potato cylinders during solar drying. The reliability of the FE model predicted results was validated through an artificial neural network model, demonstrating superior performance. The study concluded that the FE model showed better prediction capability compared to the ANN model.

JOURNAL OF FOOD SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Flow uniformity assessment in a multi-chamber cabinet of a hybrid solar dryer

Hussain H. Al-Kayiem et al.

Summary: This study investigated a hybrid solar-thermal dryer with a multi-chamber drying cabinet using experimental and computational analysis, and found that the best drying uniformity was achieved with a tray inclination angle of 30 degrees. Statistical analysis revealed that around 93% of velocity frequency is obtained at 0.7-0.8 m/s air velocity level for 30 degrees tray angle.

SOLAR ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance enhancement of solar air collector using a novel V-groove absorber plate with pin-fins for drying agricultural products: an experimental study

P. Sudhakar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Food Science & Technology

Modelling of moisture migration during convective drying of pineapple slice considering non-isotropic shrinkage and variable transport properties

Poonam Rani et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2020)

添加到收藏夹

Article Energy & Fuels

Performance analysis of an improved solar dryer integrated with multiple metallic solar concentrators for drying fruits

M. Ssemwanga et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Computational and experimental studies on the development of an energy-efficient drier using ribbed triangular duct solar air heater

Kottayat Nidhul et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Analysis of a solar air heater for augmented thermohydraulic performance using helicoidal spring shaped fins-A numerical study

H. S. Arunkumar et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Engineering, Chemical

Thermal efficiency of vertical and horizontal-finned solar collector integrated with forced air circulation dryer for Apple as a sample

Maytham Ali Al-Neama et al.

DRYING TECHNOLOGY (2019)

添加到收藏夹

Article Thermodynamics

Numerical and experimental study on drying shrinkage-deformation of apple slices during process of heat-mass transfer

Yuejin Yuan et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Thermodynamics

Computational Analysis of Heat and Mass Transfer of Impinging Jet onto Different Foods during the Drying Process at Low Reynolds Numbers

D. E. Alnak et al.

JOURNAL OF ENGINEERING THERMOPHYSICS (2019)

添加到收藏夹

Article Thermodynamics

Thermo-economic optimization of solar air heaters with arcuate-shaped obstacles

Aysan Gholami et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Energy & Fuels

Computational fluid dynamics analysis of heat transfer in a greenhouse solar dryer chapel-type coupled to an air solar heating system

Nicolas-Ivan Roman-Roldan et al.

ENERGY SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Experimental investigation and numerical modeling of heat transfer during solar drying of carrot slices

Archana Mahapatra et al.

HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Heat transfer analysis during mixed-mode solar drying of potato cylinders incorporating shrinkage: Numerical simulation and experimental validation

Kshanaprava Dhalsamant et al.

FOOD AND BIOPRODUCTS PROCESSING (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Numerical analysis on solar air collector provided with artificial square shaped roughness for indirect type solar dryer

L. Abhay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Engineering, Chemical

Modelling of coupled heat and mass transfer for combined infrared and hot-air drying of sweet potato

Daniel I. Onwude et al.

JOURNAL OF FOOD ENGINEERING (2018)

添加到收藏夹

Article Engineering, Chemical

Modeling and simulation of moisture transfer during solar drying of carrot slices

Archana Mahapatra et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Moisture transfer modeling during solar drying of potato cylinders considering shrinkage

Kshanaprava Dhalsamant et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Performance enhancement of solar air heater using herringbone corrugated fins

Rajesh Kumar et al.

ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Thermal and thermohydraulic performance of wavy finned absorber solar air heater

Abhishek Priyam et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Engineering, Chemical

Spatial homogeneity of drying in a batch type food dryer with diagonal air flow design

Waseem Amjad et al.

JOURNAL OF FOOD ENGINEERING (2015)

添加到收藏夹

Article Engineering, Chemical

Coupling CFD and Diffusion Models for Analyzing the Convective Drying Behavior of a Single Rice Kernel

Ramadan ElGamal et al.

DRYING TECHNOLOGY (2014)

添加到收藏夹

Article Thermodynamics

Numerical modeling of convective drying of food with spatially dependent transfer coefficient in a turbulent flow field

Md. Ateeque et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Engineering, Chemical

Mathematical Modeling on Air Drying of Apples Considering Shrinkage and Variable Diffusion Coefficient

Reihaneh Golestani et al.

DRYING TECHNOLOGY (2013)

添加到收藏夹

Article Geochemistry & Geophysics

Anisotropic diffusion in a finite cylinder, with geochemical applications

E. Bruce Watson et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2010)

添加到收藏夹

Article Engineering, Chemical

A methodology for determination of temperature dependent mass transfer coefficients from drying kinetics: Application to solar drying

P. P. Tripathy et al.

JOURNAL OF FOOD ENGINEERING (2009)

添加到收藏夹

Article Thermodynamics

A parametric study on the thermal performance of a solar air collector with a v-groove absorber

Tao Liu et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2007)

添加到收藏夹

Article Engineering, Chemical

Simulation of a cross-flow continuous fluidized bed dryer for paddy rice

M Izadifar et al.

JOURNAL OF FOOD ENGINEERING (2003)

添加到收藏夹

Article Engineering, Chemical

Prediction of the air velocity field in modern meat dryers using unsteady computational fluid dynamics (CFD) models

PS Mirade

JOURNAL OF FOOD ENGINEERING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.