☆ 4.8 Article

Progress in minichannel-based thermal management of lithium-ion batteries

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Machine learning based surrogate models for microchannel heat sink optimization

Ante Sikirica et al.

Summary: In this paper, microchannel designs with secondary channels and with ribs were investigated using computational fluid dynamics and were optimized using a multi-objective optimization algorithm. The proposed framework, which combines Latin hypercube sampling, machine learning-based surrogate modeling, and multi-objective optimization, showed promising results. The optimized solutions demonstrated improved performance with lower temperatures and reduced pressure drops compared to conventional microchannel designs. The proposed methodology can be used as an efficient approach for microchannel heat sink design optimization.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Thermal performance of a lithium-ion battery thermal management system with vapor chamber and minichannel cold plate

Jianping Cheng et al.

Summary: An innovative battery thermal management system using a vapor chamber and minichannel cold plate is proposed to maintain the optimal temperature and temperature uniformity of lithium-ion batteries for electric vehicles.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Chemical

Thermal management and temperature uniformity enhancement of cylindrical lithium-ion battery pack based on liquid cooling equipped with twisted tapes

Zeinab Esmaeili et al.

Summary: The effectiveness of using twisted tapes in a cooling system for battery thermal management is confirmed. A maximum battery temperature of around 305K can be achieved by having seven twist pitches, but increasing this parameter by more than five does not result noticeable performance changes. The cooling system with nonuniform twisted tapes outperforms the conventional case, with a temperature difference in the battery module stabilized within 11.25K using a twisted tape with an intensified ratio of 1.5.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

添加到收藏夹

Article Thermodynamics

A parametric study of a hybrid battery thermal management system that couples PCM with wavy microchannel cold plate

Yonghao Wang et al.

Summary: In this paper, an innovative system called hybrid wavy microchannel cold plate (HWMCP) using PCM and wavy microchannel cold plate (WMCP) is designed and analyzed. The heat storage capacity of HWMCP increases with the increase of PCM thickness and height ratio h1/h2. The cooling capacity of HWMCP is slightly improved when the liquid microchannels grow in number. Compared with unidirectional flow, cross flow significantly reduces the maximum temperature of the battery and improves the utilization rate of PCM.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

A numerical study on the battery thermal management system with mini-channel cold plate considering battery aging effect

Zengjia Guo et al.

Summary: Battery aging significantly affects the thermal characteristics and electrochemical performance of electric vehicle batteries. This research develops a realistic and generic model for the design of battery thermal management systems (BTMS) to ensure efficient and durable operation of batteries. The study shows that BTMS provides effective cooling to batteries in their initial working cycles but fails to control the battery temperature after aging. Furthermore, BTMS with Y direction mini-channels provides more effective cooling and achieves good electrochemical performance.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Automation & Control Systems

A Battery Capacity Estimation Framework Combining Hybrid Deep Neural Network and Regional Capacity Calculation Based on Real-World Operating Data

Qiushi Wang et al.

Summary: This article proposes a battery capacity estimation framework based on real-world EV operating data. A reference capacity calculation method is presented by combining the Coulomb counting method with the incremental capacity analysis method. A hybrid deep neural network model is used for battery capacity estimation, and the validation results show superior performance compared to state-of-the-art methods with a mean absolute percentage error of 2.79% while maintaining low computational cost.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2023)

添加到收藏夹

Review Engineering, Environmental

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review

Jie Luo et al.

Summary: This paper introduces the advantages of battery thermal management system based on phase change materials, analyzes the performance of different systems, and discusses future research directions.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Battery Thermal Runaway Fault Prognosis in Electric Vehicles Based on Abnormal Heat Generation and Deep Learning Algorithms

Da Li et al.

Summary: In this article, an AHG-based thermal runaway prognosis model is proposed by combining LSTM and CNN, which accurately predicts battery temperature. Principal component analysis is used to optimize the model input factors and reduce computing time. The verification results show that the proposed model achieves accurate battery temperature prediction and thermal runaway prognosis.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

添加到收藏夹

Article Thermodynamics

Numerical investigation on lithium-ion battery thermal management utilizing a novel tree-like channel liquid cooling plate exchanger

Yiwei Fan et al.

Summary: This study designed a novel (anode, cathode) double-layer tree-like channel cooling plate, optimized the structural parameters, successfully reduced the maximum temperature and standard deviation of surface temperature, improved the heat dissipation performance, and also reduced the pressure drop.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Optimization of Thermal and Structural Design in Lithium-Ion Batteries to Obtain Energy Efficient Battery Thermal Management System (BTMS): A Critical Review

H. Fayaz et al.

Summary: This review article summarizes the optimization methods of thermal and structural design parameters of LIBs under different BTMS, and discusses the application of various optimization algorithms to improve the performance of battery cooling systems.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation on flow boiling instability of R1233zd(E) in a parallel mini-channel heat sink for the application of battery thermal management

Dan Xu et al.

Summary: The present study investigated the flow boiling instability of R1233zd(E) in a 21 parallel mini-channel heat sink designed for battery thermal management. Experimental results showed that the period and initial position of reverse flow decreased as heat flux increased, and four typical reverse flow patterns were observed. The Parallel Channel Instability (PCI) featuring large inlet pressure oscillation was suppressed with increased inlet subcooling, while mass flux had limited influence on PCI suppression. Flow instability maps were established based on heat flux, mass flux, and dimensionless parameters, allowing for the categorization of stable, transition, and unstable regions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Review Chemistry, Physical

Immersion cooling for lithium-ion batteries - A review

Charlotte Roe et al.

Summary: Battery thermal management systems are critical for high-performance electric vehicles. Immersion cooling can significantly increase heat transfer rate, but system complexity and fluid stability should be considered.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Review Energy & Fuels

Phase change material based thermal management of lithium ion batteries: A review on thermal performance of various thermal conductivity enhancers

S. Babu Sanker et al.

Summary: This article discusses new approaches to lithium-ion battery thermal management using PCM-thermal conductivity enhancer combinations. The focus of the research is on discussing different thermal conductivity enhancing techniques and providing multi-scale modeling using machine learning techniques for PCM-based Li-ion battery thermal management.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

On thermal management of pouch type lithium-ion batteries by novel designs of wavy minichannel cold plates: Comparison of co-flow with counter-flow

Aida Salimi et al.

Summary: Liquid cooling technique is the most preferred method for battery thermal management due to its compactness and efficiency. Maintaining temperature uniformity within batteries is crucial for their performance, safety, and lifespan. Novel wavy minichannel cold plates are proposed to improve thermal management and temperature uniformity in pouch type lithium-ion batteries.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Mini-channel liquid cooling system for large-sized lithium-ion battery packs by integrating step-allocated coolant scheme

Nan Wu et al.

Summary: In this study, minichannel liquid cooling systems were developed and numerically investigated to regulate the temperature spikes and temperature gradients of large-sized lithium-ion battery packs. The research results suggest that the mini-channel liquid cooling system integrating the step-allocated coolant scheme can be a new approach for the thermal management of large-sized battery packs.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Thermal characteristics of refrigerant flow boiling in two mini-channel heat sinks of different aspect ratios for battery thermal management

Xiaojun Wang et al.

Summary: The two-phase refrigerant cooling system is effective in temperature control of lithium-ion batteries. The performance of mini-channel heat sinks with different aspect ratios was investigated, and it was found that the square channel heat sink achieved better cooling performance compared to the narrow channel heat sink.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Performance analysis and improvement of lithium-ion battery thermal management system using mini-channel cold plate under vibration environment

Shuguang Zuo et al.

Summary: This study investigates the performance of mini-channel cold plate in the liquid cooling system under vibration conditions, and proposes a method to improve heat transfer enhancement by adding fillets to the channel cross-section. The results show that vibration can enhance the heat transfer capacity of the cold plate.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Review Energy & Fuels

Advances in the improvement of thermal-conductivity of phase change material-based lithium-ion battery thermal management systems: An updated review

Abhijeet Mitra et al.

Summary: This study explores the impact of various enhancers for thermal conductivity on PCM-based battery thermal management systems to improve cooling performance. Key metrics such as maximum increased temperature, temperature difference, and percentage reduction in maximum battery temperature rise are used to evaluate the performance. Carbon nanofibre and silver nanoparticles show the best results for enhancing thermal management performance.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Degradation characteristics investigation for lithium-ion cells with NCA cathode during overcharging

Lei Zhang et al.

Summary: This paper explores the degradation characteristics of lithium-ion battery cells with NCA electrode during cyclic overcharging and proposes non-destructive methods to detect overcharging degradation failure. Experimental results show that battery capacity drops significantly with increasing overcharge depth and number of cycles, especially during the first three cycles and when the charging termination voltage is set to 5V. At the same time, the cell's overcharge tolerance decreases with cyclic overcharging. The combination of electrochemical impedance spectroscopy, incremental capacity analysis, and differential voltage analysis is used to diagnose cell degradation. Three main degradation modes are identified and quantified by analyzing characteristic parameters such as internal resistance and changes in peak, valley, and curve position of incremental capacity curves. It is concluded that loss of lithium inventory and loss of active materials are the dominant degradation modes during cyclic overcharging. Additionally, the sharp increase of the third peak on incremental capacity curves is identified as a unique feature of overcharging degradation, which can be used to diagnose cyclic overcharging-induced degradation in batteries with NCA cathode.

APPLIED ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins

Xin Cao et al.

Summary: This paper proposes a novel mini-channel heat sink with tessellated fins and investigates its heat cooling capacity numerically and experimentally. The results show that the new design is more conductive to heat transfer and optimized designs can further improve thermal performance and uniform substrate temperature.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Numerical optimization of the cooling effect of the bionic spider-web channel cold plate on a pouch lithium-ion battery

Jianfeng Wang et al.

Summary: By designing a bionic spider-web channel structure, the cooling performance of lithium-ion batteries can be effectively enhanced. Among the structural parameters, the channel width has the greatest influence on the cooling performance of the cold plate, with the most optimal width being 3mm.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold plates

Sepehr Mousavi et al.

Summary: The paper introduces a novel battery thermal management system using phase change materials and mini-channel cold plates, showing that battery orientation significantly affects the cooling performance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Parametric investigation to optimize the thermal management of pouch type lithium-ion batteries with mini-channel cold plates

Kokkula Monika et al.

Summary: This paper investigates the thermal management of pouch type li-ion battery module, proposing the use of cold plate and micro-channels to control temperature. Through experimental and simulation data, the optimal design parameters are determined to maintain battery temperature within an ideal range under different climatic conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Thermodynamics

State-of-the-art in heat exchanger additive manufacturing

Inderjot Kaur et al.

Summary: The progress in additive manufacturing has revolutionized heat exchanger fabrication, offering benefits in weight, volume, load bearing capabilities, and cost reduction. However, challenges such as process parameters, surface quality, and material choice accompany these advantages. Exciting times lie ahead in heat exchanger development with continuous improvements in AM technologies.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer performance enhancement of liquid cold plate based on mini V-shaped rib for battery thermal management

Wei Jiang et al.

Summary: Liquid cooling is an effective method for thermal management of high-power battery packs. By using mini V-shaped ribs to optimize the structure of the liquid cold plate, pump power consumption can be reduced while enhancing heat transfer performance. The V-shaped rib with triangular cross-section shows the same heat transfer performance under smaller flow rate and pump power consumption compared to other rib structures.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance of honeycomb-like battery thermal management system with bionic liquid mini-channel and phase change materials for cylindrical lithium-ion battery

Wen Yang et al.

Summary: A novel honeycomb-like battery thermal management system with bionic liquid mini-channel and phase change materials is proposed to enhance the working performance of lithium-ion batteries. Computational fluid dynamics and a second-order equivalent circuit model are utilized to numerically investigate the thermal performance of the battery module. The use of a hexagonal cooling plate design, along with back propagation neural networks to estimate appropriate inlet flow rates, helps stabilize the battery module's temperature within desired limits.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Novel investigation strategy for mini-channel liquid-cooled battery thermal management system

Jianguo Wang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Energy & Fuels

Multi-parameter structure design of parallel mini-channel cold plate for battery thermal management

Kai Chen et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Energy & Fuels

Thermal Management of Prismatic Lithium-Ion Battery with Minichannel Cold Plate

Jianbiao Shen et al.

JOURNAL OF ENERGY ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling

Wen Yang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Development of hybrid cooling method with PCM and Al2O3 nanofluid in aluminium minichannels using heat source model of Li-ion batteries

Masoud Mashayekhi et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Recent advances of thermal safety of lithium ion battery for energy storage

Peizhao Lyu et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Mini-channel cold plate with nano phase change material emulsion for Li-ion battery under high-rate discharge

Jiahao Cao et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries

T. Amalesh et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Theory of battery ageing in a lithium-ion battery: Capacity fade, nonlinear ageing and lifetime prediction

Selcuk Atalay et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Thermodynamics

A parametric study for optimization of minichannel based battery thermal management system

Z. An et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Multi-objective design optimization for mini-channel cooling battery thermal management system in an electric vehicle

Wei Li et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

添加到收藏夹

Article Thermodynamics

Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow

Chunrong Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Energy & Fuels

Thermal Management of a Cylindrical Lithium-Ion Battery Module Using a Multichannel Wavy Tube

Zhiguo Tang et al.

JOURNAL OF ENERGY ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Preventing heat propagation and thermal runaway in electric vehicle battery modules using integrated PCM and micro-channel plate cooling system

Krishnadash S. Kshetrimayum et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Optimization design and numerical study on water cooling structure for power lithium battery pack

Aikun Tang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module

Siqi Chen et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates

Yuqi Huang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Design optimization of bifurcating mini-channels cooling plate for rectangular Li-ion battery

Tao Deng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal management of cylindrical lithium-ion battery based on a liquid cooling method with half-helical duct

Haobing Zhou et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate

Yubai Li et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate

Fanfei Bai et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

The performance management of a Li-ion battery by using tree-like mini-channel heat sinks: Experimental and numerical optimization

Huan-ling Liu et al.

ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Thermal performance of battery thermal management system using composite matrix coupled with mini-channel

Zhonghao Rao et al.

ENERGY STORAGE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Thermodynamics

Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review

Yuanwang Deng et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery

Huaqiang Liu et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

Experimental investigation on mini-channel cooling-based thermal management for Li-ion battery module under different cooling schemes

Xueping Du et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

添加到收藏夹

Article Thermodynamics

Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flow

Chunrong Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Investigation on thermal performance and pressure loss of the fluid cold-plate used in thermal management system of the battery pack

E. Jiaqiang et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Temperature effect and thermal impact in lithium-ion batteries: A review

Shuai Ma et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

添加到收藏夹

Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Review Thermodynamics

Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review

Huaqiang Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Thermodynamics

Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source

Fanfei Bai et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface

Zhonghao Rao et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery

S. Panchal et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries

Shahabeddin K. Mohammadian et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation on lithium-ion battery thermal management based on flow boiling in mini-channel

Zhoujian An et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Prevent thermal runaway of lithium-ion batteries with minichannel cooling

Jian Xu et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Energy & Fuels

Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system

Suman Basu et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system

Zhonghao Rao et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Comparison of different cooling methods for lithium ion battery cells

Dafen Chen et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal management for high power lithium-ion battery by minichannel aluminum tubes

Chuanjin Lan et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling

Zhen Qian et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Engineering, Mechanical

Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels

Curtis K. Stimpson et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Article Energy & Fuels

A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling

Ziye Ling et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

A Thermal Runaway Simulation on a Lithium Titanate Battery and the Battery Module

Man Chen et al.

ENERGIES (2015)

添加到收藏夹

Article Thermodynamics

Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery

Jiateng Zhao et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Thermodynamics

Investigation of power battery thermal management by using mini-channel cold plate

Yutao Huo et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids

Tisha Dixit et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Energy & Fuels

Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies

Tao Wang et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Ultra-thin minichannel LCP for EV battery thermal management

L. W. Jin et al.

APPLIED ENERGY (2014)

添加到收藏夹

Review Thermodynamics

Characterization of thermal and hydrodynamic properties for microencapsulated phase change slurry (MPCS)

Lin Chen et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

添加到收藏夹

Article Chemistry, Physical

An electrochemical modeling of lithium-ion battery nail penetration

Kuan-Cheng Chiu et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on the heat dissipation performance of battery pack with different structures and operation conditions

X. M. Xu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Proceedings Paper Metallurgy & Metallurgical Engineering

Research progress of phase change materials (PCMs) embedded with metal foam (a review)

Jianqing Chen et al.

8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS (2014)

添加到收藏夹

Review Chemistry, Physical

A review on lithium-ion battery ageing mechanisms and estimations for automotive applications

Anthony Barre et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Thermodynamics

Optimization of short micro pin fins in minichannels

J. F. Tullius et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Review on thermal transport in high porosity cellular metal foams with open cells

C. Y. Zhao

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Review Thermodynamics

Review and Advances in Heat Pipe Science and Technology

Amir Faghri

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Review Chemistry, Multidisciplinary

Challenges in the development of advanced Li-ion batteries: a review

Vinodkumar Etacheri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

Review Electrochemistry

A Critical Review of Thermal Issues in Lithium-Ion Batteries

Todd M. Bandhauer et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of power battery thermal energy management

Zhonghao Rao et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

添加到收藏夹

Article Thermodynamics

Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications

Li Huang et al.

ENERGY (2009)

添加到收藏夹

Article Chemistry, Physical

A three-dimensional thermal abuse model for lithium-ion cells

Gi-Heon Kim et al.

JOURNAL OF POWER SOURCES (2007)

添加到收藏夹

Review Chemistry, Physical

Ageing mechanisms in lithium-ion batteries

J Vetter et al.

JOURNAL OF POWER SOURCES (2005)

添加到收藏夹

Review Thermodynamics

Review on thermal energy storage with phase change:: materials, heat transfer analysis and applications

B Zalba et al.

APPLIED THERMAL ENGINEERING (2003)

添加到收藏夹

Article Engineering, Aerospace

Performance characteristics of lithium ion cells at low temperatures

MC Smart et al.

IEEE AEROSPACE AND ELECTRONIC SYSTEMS MAGAZINE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.