☆ 4.8 Article

Toward the development of plasticity theories for application to small- scale metal structures

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Size and passivation effects in the torsion of thin metallic wires

Yuyang Xie et al.

Summary: Torsion tests were performed on microscale copper wires with diameters ranging from 25 to 50 μm, with and without passivation layers, to investigate the size and passivation effects. The experiments showed an increase in yield strength and flow stress due to diameter reduction and the presence of passivation layers. Passivated wires exhibited stronger size effects compared to unpassivated wires, with the torque increasing significantly with diameter decrease. The theoretical predictions based on the Fleck-Hutchinson strain gradient plasticity theory matched well with the experimental observations, elucidating the physical mechanism of passivation layers affecting the torsional deformation of wires.

ACTA MECHANICA SINICA (2023)

添加到收藏夹

Article Mechanics

Plastic buckling of columns at the micron scale

Kim L. Nielsen et al.

Summary: This paper examines the compressed wide metal columns with length to thickness ratios that undergo plastic buckling. Various strain gradient plasticity theories are used to analyze the columns. The findings suggest that one class of strain gradient theories is inadequate for predicting plastic buckling.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review

Chenxi Lu et al.

Summary: Mechanical metamaterials are architected materials that exhibit exceptional mechanical properties achieved through designed artificial structures. Recent advancements in additive manufacturing have enabled the rapid development of novel metamaterial concepts and reduced the design and validation cycle. This paper provides a detailed review of various topologies based on desired mechanical properties and discusses the manufacturing technologies and future directions for mechanical metamaterials.

ENGINEERING (2022)

添加到收藏夹

Article Microscopy

Comparing Xe+pFIB and Ga+FIB for TEM sample preparation of Al alloys: Minimising FIB-induced artefacts

Xiangli Zhong et al.

Summary: The dual beam Xe+ plasma focused ion beam (Xe(+)pFIB) instrument has shown potential benefits over conventional Ga+FIB for site-specific TEM sample preparation. The study demonstrates that Xe(+)pFIB milling produces improved STEM/TEM samples compared to Ga+ milling, making it the preferred specimen preparation route. Strategies for minimizing FIB-induced artefacts are also proposed.

JOURNAL OF MICROSCOPY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Deviation of mechanical behavior in microforming from continuum scaling: A geometrically necessary dislocation storage perspective

Bin Zhang et al.

Summary: Metal forming at the meso- and micro-scale can be affected by the grain size of the material, leading to deviations from conventional plasticity. Larger grain sizes in copper require higher pressures for extrusion in axisymmetric reverse extrusion and result in less flow into micron-sized gaps in double-punch molding compared to smaller grain sizes. Crystallographic orientation data suggests that larger grain sizes store more dislocations during deformation, influencing the mechanical behavior.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Mechanical

Understanding of plasticity size-effect governed mechanical response and incomplete die filling in a microscale double-punch molding configuration

Bin Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

On the failure mechanisms of Cr-coated 316 stainless steel in bending fatigue tests

Bin Zhang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spherical indentation response of a Ni double gyroid nanolattice

R. K. Prusty et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

Evolution of the length scale in strain gradient plasticity

Carl F. O. Dahlberg et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

Strain gradient continuum plasticity theories: Theoretical, numerical and experimental investigations

George Z. Voyiadjis et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Mechanics

Fractional strain-gradient plasticity

C. F. O. Dahlberg et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)

添加到收藏夹

Article Mechanics

A finite strain FE-Implementation of the Fleck-Willis gradient theory: Rate independent versus visco-plastic formulation

K. L. Nielsen et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)

添加到收藏夹

Article Engineering, Mechanical

A simple model for size effects in constrained shear

Mitsutoshi Kuroda et al.

EXTREME MECHANICS LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion

Bin Zhang et al.

MATERIALIA (2019)

添加到收藏夹

Article Mechanics

An incremental flow theory for crystal plasticity incorporating strain gradient effects

C. Nellemann et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Steady-state numerical modeling of size effects in micron scale wire drawing

K. J. Juul et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical failure of metal/ceramic interfacial regions under shear loading

Xiaoman Zhang et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Engineering, Manufacturing

Rolling at Small Scales

Kim L. Nielsen et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Mechanical meta-materials

Amir A. Zadpoor

MATERIALS HORIZONS (2016)

添加到收藏夹

Article Mechanics

Guidelines for Constructing Strain Gradient Plasticity Theories

N. A. Fleck et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hall-Petch effect and strain gradient effect in the torsion of thin gold wires

Zhipeng Gan et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Engineering, Mechanical

Micro-pillar measurements of plasticity in confined Cu thin films

Yang Mu et al.

EXTREME MECHANICS LETTERS (2014)

添加到收藏夹

Article Engineering, Mechanical

Toward a further understanding of size effects in the torsion of thin metal wires: An experimental and theoretical assessment

Dabiao Liu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Size effects in the torsion of microscale copper wires: Experiment and analysis

Dabiao Liu et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

From micro- to nano-scale molding of metals: Size effect during molding of single crystal Al with rectangular strip punches

Ke Chen et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quasi-Static Torsion Characterization of Micro-diameter Copper Wires

W. -Y. Lu et al.

EXPERIMENTAL MECHANICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

TEM Specimen Preparation with Plasma FIB Xe+ Ions

L Giannuzzi et al.

MICROSCOPY AND MICROANALYSIS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size effects in yield and plasticity under uniaxial and non-uniform loading: experiment and theory

A. J. Bushby et al.

PHILOSOPHICAL MAGAZINE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect

Julia R. Greer et al.

PROGRESS IN MATERIALS SCIENCE (2011)

添加到收藏夹

Article Instruments & Instrumentation

A new method to measure torsion moments on small-scaled specimens

M. Walter et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Ultralight Metallic Microlattices

T. A. Schaedler et al.

SCIENCE (2011)

添加到收藏夹

Review Materials Science, Multidisciplinary

The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations

George M. Pharr et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

A mathematical basis for strain-gradient plasticity theory-Part I: Scalar plastic multiplier

N. A. Fleck et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

A mathematical basis for strain-gradient plasticity theory. Part II: Tensorial plastic multiplier

N. A. Fleck et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)

添加到收藏夹

Article Physics, Multidisciplinary

Elastic Limit and Strain Hardening of Thin Wires in Torsion

D. J. Dunstan et al.

PHYSICAL REVIEW LETTERS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bauschinger and size effects in thin-film plasticity

Y. Xiang et al.

ACTA MATERIALIA (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoscale gold pillars strengthened through dislocation starvation

Julia R. Greer et al.

PHYSICAL REVIEW B (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: Small deformations

ME Gurtin et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)

添加到收藏夹

Article Engineering, Mechanical

A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part II: Finite deformations

ME Gurtin et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

添加到收藏夹

Article Multidisciplinary Sciences

Sample dimensions influence strength and crystal plasticity

MD Uchic et al.

SCIENCE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

A unified treatment of strain gradient plasticity

P Gudmundson

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations

ME Gurtin

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism-based strain gradient plasticity - II. Analysis

Y Huang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.