☆ 4.3 Article

Machinability study on laser-based powder bed fusion processed hypo-eutectic aluminium alloy composite (AlSi10Mg+NbC)

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Dentistry, Oral Surgery & Medicine

Influence of print orientation and wet-dry storage time on the intaglio accuracy of additively manufactured occlusal devices

Marta Revilla-León et al.

JOURNAL OF PROSTHETIC DENTISTRY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of AlSi10Mg/NbC Composite Produced by Laser-Based Powder Bed Fusion (L-PBF) Process

R. Raj Mohan et al.

Summary: In this study, AlSi10Mg metal matrix composites with varying weight percentages of niobium carbide were produced using a laser-based powder bed fusion process. The addition of niobium carbide improved the density and mechanical properties of the composite, but excessive amounts of niobium carbide reduced the tensile strength.

JOM (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Temperature dependence of electrical resistivity, deformation, and fracture of polygranular graphite with different amounts of porosity

C. Paraskevoulakos et al.

Summary: Synthetic polygranular graphites have wide applications, with potential as moderator materials for high-temperature nuclear power plants. Experimental work evaluated the resistivity and mechanical behavior of the material at different temperatures. Results showed a 30% increase in stiffness above 400 degrees C and linear decrease in tensile strength with increasing porosity at 700 degrees C. Resistivity reduction during the temperature transition was found to be linearly dependent on porosity.

SN APPLIED SCIENCES (2023)

添加到收藏夹

Article Engineering, Manufacturing

Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness

Manuela Galati et al.

Summary: Additive manufacturing technologies for metallic materials enable the production of high-performance components with optimized weight, geometry, and mechanical properties. However, post-processing operations are necessary, including part removal from the build platform, which must be performed quickly, accurately, and with a smooth surface finish. This study investigates the wire electric discharge machining (W-EDM) process for Ti6Al4V specimens produced by AM technologies and analyzes the influence of cutting parameters compared to those of conventional technology. Models of cutting speed and surface roughness are derived from collected data, highlighting the significance of the manufacturing process in defining surface roughness and the key parameters affecting machining performance.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2023)

添加到收藏夹

Article Engineering, Biomedical

Influence of surface finishing and printing layer orientation on surface roughness and flexural strength of stereolithography-manufactured dental zirconia

Y. Lu et al.

Summary: This study evaluated the effect of surface finishing and printing layer orientation on the surface roughness and flexural strength of 3D-printed yttria-stabilized zirconia. The results showed that orienting the printed layers parallel to the tensile side improved the mechanical performance. Additionally, polishing significantly improved the flexural strength, and it is necessary to reduce surface roughness and large pores for optimal performance.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach

G. Karthik Pandiyan et al.

Summary: An investigation was conducted on the machinability of AA6061-T6/15wt.% SiC composites fabricated by stir casting method using electrical discharge machining (EDM), and the process parameters were optimized using the multi-criteria decision-making (MCDM) method. The optimum conditions were found to be 9A current, 100 μs pulse on time, and 40V gap voltage.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation on powder processing and its flow properties of AlSi10Mg alloy with niobium carbide for additive manufacturing

Raj Mohan Radhakrishnan et al.

Summary: This study involved mixing spherical aluminium-silicon alloy AlSi10Mg powder with irregular niobium carbide powder in different weight percentages and processing them in a planetary ball mill. By optimizing processing conditions, composite specimens suitable for selective laser melting were fabricated, with the cube specimen at 6% niobium carbide achieving a high relative density of 99.21%.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Optimization of machining parameters in chromium-additive mixed electrical discharge machining of the AA7075/5%B4C composite

Vineet Dubey et al.

Summary: This study establishes the optimum process condition for additive mixed electrical discharge machining of Al7075-5%B4Cp metal matrix composite through experimental investigation. The influence of different input parameters on tool wear and surface roughness of the composite is analyzed by comparing the machined surface microstructures, cracks, and recast layers formed at different settings.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Physical

Laser Powder-Bed Fusion of Ceramic Particulate Reinforced Aluminum Alloys: A Review

Tatevik Minasyan et al.

Summary: Aluminum alloys, reinforced with ceramic particulates through techniques like laser powder-bed fusion, offer high-performance materials with excellent mechanical properties. The focus of current research is on using additives for grain refinement to enhance the mechanical performance of printed parts.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Comparative Evaluation of Surface Roughness and Hardness of 3D Printed Resins

Yousif A. Al-Dulaijan et al.

Summary: This study investigated the effect of printing orientation and post-curing time on the surface roughness and hardness of 3D-printed denture base resins. The results showed that printing orientation and post-curing time did not significantly affect the surface roughness, but had an impact on the hardness of the resin.

MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review on machining of additively manufactured nickel and titanium alloys

Navneet Khanna et al.

Summary: Machining nickel and titanium-based superalloy components is expensive, leading to the development of additive manufacturing processes for near-net shape parts to reduce lead time and material waste. The machinability of AMed nickel and titanium workpieces is different from their wrought counterparts, requiring further research on optimized machining parameters and cutting tool performance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization of process parameters of electrical discharge machining of fabricated AA6082-ALN

M. Tamilarasan et al.

Summary: The study focuses on the fabrication and machining of Aluminium alloy 6082 and 10% Aluminium nitrite based metal matrix composite using stir casting and Electrical Discharge Machining (EDM) processes. Optimization of process parameters was done using Taguchi method and analysis of variance was performed to find the significance of machining parameters.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel

Ramazan Cakiroglu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Mechanical

Multi-objective optimization of drilling EDM process parameters of LM13 Al alloy-10ZrB2-5TiC hybrid composite using RSM

Arunbharathi Ramaswamy et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting

Pei Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review

W. H. Yu et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigating the surface integrity of aluminium based composites machined by EDM

S. Suresh Kumar et al.

DEFENCE TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes

Irene Buj-Corral et al.

MATERIALS (2019)

添加到收藏夹

Article Automation & Control Systems

Modeling and optimization of Wire-EDM parameters for machining of Ni55.8Ti shape memory alloy using hybrid approach of Taguchi and NSGA-II

Raymond Magabe et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimisation of EDM process parameters for AA7050-10 (WT) % B4C composite through ARAS, grey and Taguchi technique

Arvind Kumar et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Bulk Cu-NbC nanocomposites with high strength and high electrical conductivity

Wei Zeng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental Investigation and optimization of EDM process parameters on Aluminum metal matrix composite

Anil Kumar Bodukuri et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Article Computer Science, Software Engineering

Analysis and selection of a regression model for the Use Case Points method using a stepwise approach

Radek Silhavy et al.

JOURNAL OF SYSTEMS AND SOFTWARE (2017)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

MRR and TWR evaluation on electrical discharge machining of Ti-6Al-4V using tungsten : copper composite electrode

J. Prasanna et al.

FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Ceramics

Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design

Dun Liu et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Engineering, Industrial

Selective laser melting of aluminium components

Eleftherios Louvis et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Manufacturing

Thermo-physical modeling of die-sinking EDM process

S.N. Joshi et al.

Journal of Manufacturing Processes (2010)

添加到收藏夹

Article Energy & Fuels

Application of Box-Behnken design and response surface methodology for modeling of some Turkish coals

N. Aslan et al.

FUEL (2007)

添加到收藏夹

Article Engineering, Industrial

Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model

JP Davim et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.