4.3 Article

Numerical investigation of H2/Air fueled micro combustion characteristics with trapezoidal ribs for micro thermophotovoltaic applications: Effect of rib height

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Effect of vane angle on combustion characteristics of premixed H2/air in swirl micro-combustors with straight vane or twisted vane

Insong Kim et al.

Summary: This study investigates the effects of twisted and straight swirler vanes on the combustion characteristics in a swirl micro-combustor, and compares them under different inlet velocities, equivalence ratios, and wall materials. The results show that increasing the vane angle expands the recirculation zones in both types of swirler. The effect of vane angle on wall temperature is different for each type.

APPLIED THERMAL ENGINEERING (2023)

Article Thermodynamics

Combustion characteristic of premixed H2/air in the micro cavity combustor with guide vanes

Wei Gao et al.

Summary: The research shows that the cavity combustor with guide vanes has better combustion characteristics and higher temperature in the high-temperature zone compared to the traditional cavity combustor. It also has better preheating and ignition effects under different guide vane geometries.

ENERGY (2022)

Review Energy & Fuels

Recent progress in flame stabilization technologies for combustion-based micro energy and power systems

Jianlong Wan et al.

Summary: This article discusses the development and classification of flame stabilization technologies in micro-combustors, including single flame stabilization technologies, combined flame stabilization technologies, and other technologies. Progress made in the past decade is summarized, along with a discussion on the underlying mechanisms of these flame anchoring strategies.
Article Energy & Fuels

Performance Evaluation of H2/Air Premixed Combustion in a Suddenly Expanded Microcombustor with Wall Fin

Arees Qamareen et al.

Summary: The study investigated the influence of a 2D, axisymmetric microcombustor with a backward-facing step and triangular wall fin on combustion performance, with numerical results indicating that the wall fin blockage ratio alters the reaction zone and significantly improves combustor performance at lower inlet velocities. The location and shape of the wall fin were found to influence the temperature distribution, while a higher blockage ratio had adverse effects on combustion characteristics at higher inlet velocities.

ENERGY TECHNOLOGY (2021)

Article Chemistry, Physical

Effect of the cavity aft ramp angle on combustion efficiency of lean hydrogen/air flames in a micro cavity-combustor

Linhong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs

Siliang Ni et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Thermodynamics

Micro-power generation using micro-turbine (moving) and thermophotovoltaic (non-moving) systems

Seyed Ehsan Hosseini

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)

Article Chemistry, Multidisciplinary

Numerical Investigation of the Combustion in an Improved Microcombustion Chamber with Rib

Hai Chen et al.

JOURNAL OF CHEMISTRY (2019)

Article Chemistry, Physical

Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor

Jianfeng Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Engineering, Environmental

Fundamental flame characteristics of premixed H-2-air combustion in a planar porous micro-combustor

Jun Li et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Combustion process and entropy generation in a novel microcombustor with a block insert

Yang Wenming et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Thermodynamics

Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities

Jianlong Wan et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Article Chemistry, Physical

Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

A numerical investigation on combustion characteristics of H2/air mixture in a microcombustor with wall cavities

Jianlong Wan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Thermodynamics

Experimental investigations on a new active swirl based microcombustor for an integrated micro-reformer system

Gur Partap Singh Sahota et al.

ENERGY CONVERSION AND MANAGEMENT (2011)

Article Engineering, Electrical & Electronic

Experimental and numerical study of the wall temperature of cylindrical micro combustors

J. Li et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)

Article Thermodynamics

Burning velocity and OH concentration in premixed combustion

K. Yamamoto et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Review Chemistry, Physical

The development of a micropower (micro-thermophotovoltaic) device

Loy Chuan Chia et al.

JOURNAL OF POWER SOURCES (2007)

Article Thermodynamics

Numerical modeling of non-adiabatic heat-recirculating combustors

C. H. Kuo et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Review Chemistry, Physical

A comprehensive kinetic mechanism for CO, CH2O, and CH3OH combustion

Juan Li et al.

INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2007)

Article Engineering, Chemical

Heterogeneous-homogeneous interactions in catalytic microchannel reactors

S. Chattopadhyay et al.

AICHE JOURNAL (2006)

Article Thermodynamics

Combustion in micro-cylindrical combustors with and without a backward facing step

WM Yang et al.

APPLIED THERMAL ENGINEERING (2002)