☆ 4.7 Article

Cycle deformation behavior of 3D-printed CF/PEEK honeycomb metamaterials with zero Poisson's ratios

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Sandwich structures based on fused filament fabrication 3D-printed polylactic acid honeycomb and poly(vinylidene fluoride) nanocomposites for microwave absorbing applications

Debora P. Schmitz et al.

Summary: Polylactic acid (PLA)-based honeycomb samples with different cell sizes and thickness were prepared using 3D printing technology. These honeycomb structures were used as core components in sandwiched multilayer structures with poly(vinylidene fluoride) (PVDF) and/or PVDF/carbon nanotube (CNT) nanocomposites. The properties of these structures in terms of microwave absorption were investigated, and it was found that the honeycomb design and the presence of an impedance matching layer influenced the results.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

Study of three-point bending behaviors of composite sandwich structure with re-entrant honeycomb cores

Zhikang Liu et al.

Summary: This article investigates the bending behaviors of composite re-entrant honeycomb structures under three-point bending load. The influence of wall thickness gradient design on bending failure modes and the effect of relative density on bending failure load were analyzed.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

Free and forced vibration response of a laminated composite sandwich beam with dual honeycomb core: Numerical and experimental study

Narayanan Thanikasalam et al.

Summary: This study investigates the free and forced vibration characteristics of composite sandwich beams with single-core (SC) and dual-core (DC). The wet hand-layup technique is used for the composite face sheet, while the honeycomb cores are 3D printed using fused filament fabrication method. The natural frequencies are measured through experimental modal tests and validated with a finite-element model. Parametric studies are conducted to analyze the effect of different parameters on the vibration behavior of DC sandwich beams. It is found that the inclusion of a core enhances the vibration behavior of the sandwich beam.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

An electric-driven variable stiffness morphing skin: Preparation and properties

Xiaoming Ren et al.

Summary: This article investigates composite morphing skins based on hydro-epoxy resin/carboxyl-terminated butadiene acrylonitrile/maleic anhydride matrix, doped with conductive carbon black (CB). The in-plane and out-of-plane properties of the skins can be adjusted by varying the CB content. Results show that the in-plane tensile strength decreases as the CB content increases. The electrical resistivity of the skin decreases sharply at a low-percolation threshold and then maintains a low and steady level. In terms of shape memory, the selected composite skins exhibit excellent thermo-driven and electro-active shape recovery properties.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Polymer Science

Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler

Miroslav Muller et al.

Summary: The current research focuses on evaluating the fatigue behavior of pure PLA and PLA reinforced with natural fillers like pinewood, bamboo, and cork, showing that their fatigue life is similar under the same loading conditions. The presence of natural fillers did not reduce the material's ability to respond to low-cycle fatigue, and cyclic testing did not significantly affect the tensile strength and durability of PLA-based materials. Furthermore, under cyclic loading, the visco-elastic behavior of tested materials increased, along with the presence of porosity and good interfacial compatibility with biological fillers as shown by SEM analysis.

POLYMERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing of Auxetic Metamaterials with High-Temperature and Programmable Mechanical Properties

Lei Ren et al.

Summary: In this study, a new mechanical metamaterial with programmable mechanical properties was prepared using the high-performance polymer PEEK as the printing material. By combining structural design with the shape memory properties of PEEK, reconfigurable metamaterial structure and properties were achieved.

ADVANCED MATERIALS TECHNOLOGIES (2022)

添加到收藏夹

Article Engineering, Mechanical

Spanwise wing morphing using multistable cellular metastructures

D. Matthew Boston et al.

Summary: This paper introduces the concept of morphing wings, which provide additional functionality and performance through spanwise morphing. A novel lightweight structure composed of cellular metamaterials is proposed, allowing large elastic deformations while maintaining load-bearing capacity. The mechanical properties of different multistable honeycombs are characterized, and two honeycombs are selected to develop a shape adaptable metastructure. The performance of a hybrid span-morphing wing concept is assessed using static aeroelastic analysis, demonstrating increased lift without increased wing deflection.

EXTREME MECHANICS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Prabaha Sikder et al.

Summary: This study investigates the impact of various FDM parameters on the mechanical properties of 3D printed PEEK and establishes a processing-structure-property relationship for FDM-developed PEEK parts. The study finds that nozzle and chamber temperature, layer height, and print speed are critical for developing robust PEEK structures. Annealing contributes to achieving PEEK parts with excellent tensile, compressive, and flexural strengths.

MATERIALIA (2022)

添加到收藏夹

Article Mechanics

Theoretical, numerical and experimental study on the in-plane elastic behavior of a 2D chiral cellular structure

Weidong Liu et al.

Summary: This study investigates a 2D chiral cellular structure composed of arc-formed beams and studies its elastic properties using the energy method. The structure displays zero Poisson's ratio, low in-plane equivalent moduli, and high global-local strain ratios.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Elastomer-based skins for morphing aircraft applications: Effect of biaxial strain rates and prestretch

Dilshad Ahmad et al.

Summary: This study focuses on elastomeric morphing skins and examines the effects of biaxial strain rates and prestretch ratios on important mechanical properties. Three polymeric materials are compared under biaxial loading in a morphing wing.

POLYMER TESTING (2022)

添加到收藏夹

Article Polymer Science

The Shape Memory Properties and Actuation Performances of 4D Printing Poly (Ether-Ether-Ketone)

Yuting Zhou et al.

Summary: Shape-memory polymers have important applications in the fields of mechanism and biomedical engineering, but their use in harsh environments is still challenging. Research has found that polyether-ether-ketone with high glass transition temperature exhibits excellent high-temperature resistance and shape memory behavior. By studying its shape-memory properties and actuation performance, the potential of this polymer in aerospace has been demonstrated.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Characterisation of void and fiber distribution in 3D printed carbon-fiber/PEEK using X-ray computed tomography

S. Sommacal et al.

Summary: The study found that the 3D printing process did not eliminate the voids present in the feedstock filament, and the variation of key printing parameters had minor effects on void content in the printed samples. However, the depositional nature of the printing process strongly influenced the internal geometry of the samples.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Composites

Fracture behavior of 3D printed carbon fiber-reinforced polymer composites

Denizhan Yavas et al.

Summary: This study investigates the inter-layer and cross-layer fracture behavior of 3D printed short CFRP composites through experimental and numerical methods. The cross-layer fracture toughness was found to be three-fold of the inter-layer counterparts. Fracture surface morphology and crack-tip strain field demonstrated different toughening mechanisms for cross-layer and inter-layer fractures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Aerospace

Mechanics of a novel cellular structure for morphing applications

Weidong Liu et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Textiles

Development of uni-stretch woven fabrics with zero and negative Poisson's ratio

Adeel Zulifqar et al.

TEXTILE RESEARCH JOURNAL (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-stiffness topology optimization of zero Poisson's ratio cellular structures

Jian Huang et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio

Luke Mizzi et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of fine-scale features on the elastic properties of zero Poisson's ratio honeycombs

Jiale Huang et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

An investigation into 3D printing of fibre reinforced thermoplastic composites

L. G. Blok et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Analysis of the cyclic tensile behaviour of an elasto-viscoplastic polyamide

H. S. da Costa Mattos et al.

POLYMER TESTING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

A corrugated flexible composite skin for morphing applications

J. B. Bai et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Shape optimisation of composite corrugated morphing skins

Anna Ermakova et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

In-plane mechanics of a novel zero Poisson's ratio honeycomb core

Jian Huang et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds

F. S. Senatov et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Isotropic and anisotropic elasticity and yielding of 3D printed material

Rui Zou et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Aerospace

In-plane corrugated cosine honeycomb for 1D morphing skin and its application on variable camber wing

Liu Weidong et al.

CHINESE JOURNAL OF AERONAUTICS (2013)

添加到收藏夹

Article Engineering, Manufacturing

A multi-stable wavy skin based on bi-stable laminates

Fuhong Dai et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review of Morphing Aircraft

Silvestro Barbarino et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hexagonal Honeycombs with Zero Poisson's Ratios and Enhanced Stiffness

Joseph N. Grima et al.

ADVANCED ENGINEERING MATERIALS (2010)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of trapezoidal corrugated aramid/epoxy laminates under large tensile displacements transverse to the corrugation direction

Christophe Thill et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Composite chiral structures for morphing airfoils: Numerical analyses and development of a manufacturing process

Paolo Bettini et al.

COMPOSITES PART B-ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Zero Poisson's Ratio Cellular Honeycombs for Flex Skins Undergoing One-Dimensional Morphing

Kingnide Raymond Olympio et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and Fabrication of a Passive 1D Morphing Aircraft Skin

Edward A. Bubert et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical properties of corrugated composites for candidate materials of flexible wing structures

Tomohiro Yokozeki et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.