☆ 4.7 Article

Impact damage assessment in laminated composites using acoustic emission and finite element methods

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Fiber bridging mechanism in moisture-induced mode I delamination in carbon/epoxy composites: Finite element analysis and experimental investigation

King Jye Wong et al.

Summary: In this study, a new bilinear-exponential traction-separation law (BETS) is proposed to investigate the delamination behavior of carbon fiber reinforced epoxy composite laminates in wet conditions. Finite element analysis shows that the BETS law agrees well with experimental results in terms of force-displacement curves and crack length versus displacement relationship.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Engineering, Civil

Damage evolution and failure mechanism of asymmetric composite laminates under low-velocity impact and compression after impact

Jianchao Zou et al.

Summary: This study experimentally and numerically investigated the damage evolution and failure mechanisms of asymmetric composite laminates under low-velocity impact (LVI) and compression after impact (CAI) loading conditions. The damage state, size, and delamination damage induced by LVI under different impact energies were analyzed using ultrasonic phased array C-scan technique. Full-field displacement and strain evolution in the asymmetric composite laminates during the CAI tests were monitored using a three-dimensional digital image correlation (3D-DIC) technique. A three-dimensional damage model considering the interaction among interlaminar delamination damage, intralaminar matrix damage, and intralaminar fiber damage was proposed, and an interface-based cohesive behavior embedded framework in ABAQUS/Explicit was used to capture the interlaminar damage. The complex damage and failure mechanisms of the asymmetric laminates in the LVI and CAI processes were simulated, and the relationships among different impact energies, impact damage modes, delamination morphologies, and compression damage propagation and failure modes were discussed.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Article Materials Science, Composites

Numerical investigation on behaviors of composite laminates with initial delamination defects under impact and compression after impact

Xuecheng Han et al.

Summary: In this article, the behavior of composite laminates with initial delamination defects under impact and compression after impact is investigated. The effects of different delamination defects on impact response and compression after impact (CAI) strength are compared, and the failure mechanisms under CAI loading are disclosed.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Engineering, Mechanical

Tension-after-impact analysis and damage mechanism evaluation in laminated composites using AE monitoring

S. Hoseinlaghab et al.

Summary: This paper focuses on the dominant damage mechanisms in tensile loading of laminated composite specimens subjected to low-velocity impact using acoustic emission method. The effects of various nanoparticles on the tension-after-impact strength of glass fiber-reinforced polymer composites have also been investigated. The results show that the nanoparticles have significantly enhanced the impact strength and TAI strength of the composites.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Materials Science, Composites

Study on impact resistance and parameter optimization of patch-repaired plain woven composite based on multi-scale analysis

Zhenhui Sun et al.

Summary: A multi-scale modeling strategy was used to study the impact resistance of patch-repaired plain woven carbon-fiber-reinforced-polymer laminates. The finite element model of the patch-repaired laminate was established and verified through low-velocity impact tests. The impact resistance of the repaired specimens under different impact conditions was studied, and patch parameters were optimized through multi-objective optimization.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

The effect of alternating the sequence of variable-energy repeated impact on the residual strength and damage evolution of composite laminates

Milad Saeedifar et al.

Summary: This article investigates the effect of alternating the sequence of variable-energy repeated low-velocity impact on the residual strength of carbon fiber reinforced polymer (CFRP) laminates. The results showed that the residual strength of the specimens was not significantly affected by alternating the impacts sequence. However, the impact-induced damage in HML configuration was activated much earlier than MLH, and the damage induced in LMH configuration was activated later than both.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

Identification of fatigue damage modes for carbon fiber/epoxy composites using acoustic emission monitoring under fully reversed loading

Yi-Er Guo et al.

Summary: This study investigates the fatigue damage modes of carbon fiber/epoxy composite laminates with symmetrical architecture under fully reversed loading using acoustic emission (AE) technique. Principal component analysis and K-means cluster analysis are performed to identify different damage modes based on AE characteristic parameters, including energy, amplitude, and duration time. The analysis results reveal that high-intensity AE signals are generated by compressive load, while low-intensity AE signals are generated by tensile load. The fatigue damage caused by compressive load is found to be greater than that of tensile load. Additionally, the laminate specimens are classified into five types of damage modes, including matrix cracks, fiber/epoxy interface debonding, shear, delamination, and fiber breakage.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Quasi-static indentation and acoustic emission to analyze failure and damage of bio-composites subjected to low-velocity impact

Mohamed Habibi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Mechanics

The effectiveness of patch repairs to restore the impact properties of carbon-fibre reinforced-plastic composites

Z. E. C. Hall et al.

Summary: This paper investigates the low-velocity impact testing of carbon-fibre reinforced-plastic (CFRP) pristine and patch-repair CFRP panels. The results show that single-sided patch repairs can effectively restore the impact performance of damaged CFRP panels.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Materials Science, Composites

A novel methodology to research the residual compressive mechanical properties of composite stiffened panel after low velocity impact based on quantification damage simulation

Shan Xiao et al.

Summary: This study aims to predict the residual compressive mechanical behavior of composite stiffened panels. Through axial compression after impact testing and finite element modeling, the failure mechanisms of different types of stiffened panels were investigated, and the destructive influence of damage and delamination on panel failure was determined. The predicted results were consistent with the experimental results.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Engineering, Civil

Study of impact damage on composite laminates induced by strip impactor using DIC and infrared thermography

Hongliang Tuo et al.

Summary: This paper investigates the impact damage caused by strip impactors and residual mechanical performance of composite laminates using DIC and infrared thermography. A continuum damage model and a cohesive model were utilized to simulate the intralaminar and interlaminar behaviors, respectively. The results indicate that the delamination area and residual load capacity decrease as the impact angle increases. Compression after impact (CAI) process leads to strain concentration in the damage area and local buckling. Subsequently, delamination and matrix damage occur, followed by fiber damage. The composite laminates collapse when the fiber damage area covers the whole width of the damage area.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Numerical study on the dynamic progressive failure due to low-velocity repeated impacts in thin CFRP laminated composite plates

M. Rezasefat et al.

Summary: This paper numerically investigates the mechanical response of Carbon Fibre Reinforced Polymer (CFRP) plates subjected to repeated low-velocity impacts. The numerical models are validated using experimental data obtained from impact tests on CFRP plates, showing that most of the intra-laminar and interlaminar damage is limited to a few initial impacts.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

An evaluation of Cuntze and Puck inter fibre failure criteria in simulation of thin CFRP plates subjected to low velocity impact

M. Rezasefat et al.

Summary: This study implemented and evaluated a continuum damage mechanics-based material model to predict the damage and mechanical response of carbon fibre reinforced polymer composites under low velocity impact. The use of both Cuntze and Puck failure criteria, along with a novel approach to search for the fracture angle, demonstrated efficient and accurate prediction of the matrix damage caused by low velocity impact. The simpler failure model of Cuntze proved to be more preferable for explicit simulations due to reduced computational time.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Compressive fatigue behavior of low-velocity impacted thermoplastic composite laminate

Jiwei Chen et al.

Summary: This study conducted residual compressive strength and compression-compression fatigue tests on two types of AS4/PEEK laminates with low-velocity impact damage to investigate damage propagation characteristics. It was found that the depth of impact dent is a key indicator of the severity of impact damage and residual fatigue life. Results showed that a laminate with more severe impact damage had shorter residual compressive fatigue life.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical comparison between Hashin and Chang-Chang failure criteria in terms of inter-laminar damage behavior of laminated composite

J. R. Shao et al.

Summary: This paper establishes a three-dimensional finite element model for low-velocity impact analysis of composite materials, which can accurately simulate the initiation and evolution of intra-laminar and inter-laminar damage. The influence of stacking sequence and friction coefficient on mechanical response and damage distribution is analyzed, highlighting the importance of +/- 45 degrees layer and optimal friction coefficient for computation accuracy.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Differential evolution: A recent review based on state-of-the-art works

Mohamad Faiz Ahmad et al.

Alexandria Engineering Journal (2021)

添加到收藏夹

Article Materials Science, Composites

Bridging the low-velocity impact energy versus impact damage and residual compression strength for composite laminates

Di Zhang et al.

Summary: A finite element model based on fiber kinking and a transversal fracture angle damage model with cohesive elements is proposed to simulate the low-velocity impact and compression after impact of composites. The model is validated using experimental work with a carbon fiber/epoxy material system, showing good agreement with experimental results. The analysis reveals that delamination is the dominant damage mode for LVI, while CAI exhibits a brittle behavior with little loss of stiffness before failure. The relationship between LVI energy and damage, as well as impact energy and CAI strength, is established.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

A study on low-velocity impact performance of notched GFRP composites repaired by different composite patches: Experiment and modeling

Umut Caliskan et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Damage characterization of laminated composites using acoustic emission: A review

Milad Saeedifar et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Review Mechanics

Impact resistance and damage tolerance of fiber reinforced composites

S. Z. H. Shah et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels

B. Aryal et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using Acoustic Emission

Milad Saeedifar et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Barely visible impact damage assessment in laminated composites using acoustic emission

Milad Saeedifar et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Investigation of interleaf sequence effects on impact delamination of nano-modified woven composite laminates using cohesive zone model

H. Saghafi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 2-Numerical simulation

X. C. Sun et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 1-Experiments

E. Abisset et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Manufacturing

A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates

A. Wagih et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling of progressive damage for composites under ballistic impact

Aswani Kumar Bandaru et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model

Chao Zhang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact

Jikui Zhang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Delamination prediction in composite laminates under low-velocity impact

Shuchang Long et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates

L. S. Sutherland et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Composites

The predictive capability of failure mode concept-based strength conditions for laminates composed of unidirectional laminae under static triaxial stress states

R. Cuntze

JOURNAL OF COMPOSITE MATERIALS (2012)

添加到收藏夹

Article Materials Science, Composites

Material and structural response of polymer-matrix fibre-reinforced composites

S. T. Pinho et al.

JOURNAL OF COMPOSITE MATERIALS (2012)

添加到收藏夹

Article Engineering, Mechanical

On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses

R. Gutkin et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

添加到收藏夹

Article Engineering, Manufacturing

An experimental and numerical investigation into the damage mechanisms in notched composites

S. R. Hallett et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Materials Science, Composites

Continuum Models for the Analysis of Progressive Failure in Composite Laminates

F. P. Van Der Meer et al.

JOURNAL OF COMPOSITE MATERIALS (2009)

添加到收藏夹

Article Mechanics

Punch shear based penetration model of ballistic impact of thick-section composites

B. A. Gama et al.

COMPOSITE STRUCTURES (2008)

添加到收藏夹

Article Engineering, Manufacturing

Predicting the effect of through-thickness compressive stress on delamination using interface elements

Xiangqlan Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

A continuum damage model for composite laminates:: Part II -: Computational implementation and validation

P. Maimi et al.

MECHANICS OF MATERIALS (2007)

添加到收藏夹

Article Materials Science, Composites

Prediction of size effects in notched laminates using continuum damage mechanics

P. P. Camanho et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Composites

Damage propagation in CFRP laminates subjected to low velocity impact and static indentation

Yuichiro Aoki et al.

ADVANCED COMPOSITE MATERIALS (2007)

添加到收藏夹

Article Engineering, Manufacturing

Progressive damage modeling in fiber-reinforced materials

Ireneusz Lapczyk et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Materials Science, Composites

Failure criteria for FRP laminates

CG Davila et al.

JOURNAL OF COMPOSITE MATERIALS (2005)

添加到收藏夹

Article Materials Science, Composites

Failure analysis of FRP laminates by means of physically based phenomenological models

A Puck et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Composites

A delamination criterions for laminated composites under low-velocity impact

JP Hou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

添加到收藏夹

Article Materials Science, Composites

Prediction of impact damage in composite plates

JP Hou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.