☆ 4.7 Article

Impact of Mendong fiber-epoxy composite interface properties on electric field frequency exposure

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article

Study on Water Absorption Characteristics, Various Chemical Treatments, and Applications of Biological Fiber-Reinforced Polymer Matrix Composites

Ramakrishnan Thirumalaisamy et al.

Journal of Nanomaterials (2023)

添加到收藏夹

Article Materials Science, Composites

Alignment of multiwalled carbon nanotubes-reinforced epoxy by a novel shear assisted method in the presence of the electric field

Erfan Moaseri et al.

Summary: The application of multiwall carbon nanotubes (MWCNTs) alignment techniques using external fields is limited due to cost implications. To address this, a shear-assisted method is introduced to enhance the effectiveness of MWCNTs alignment using electric field. The effect of curing temperature of polymer in CNT-reinforced nanocomposites on MWCNTs alignment using shear-assisted technique is investigated, showing that higher curing temperature can improve the alignment by preventing agglomeration of MWCNTs in the matrix. Fractography of reinforced composites is also studied to examine the effects of curing temperature on MWCNTs alignment in the epoxy matrix.

POLYMER COMPOSITES (2023)

添加到收藏夹

Review Materials Science, Composites

Lignocellulosic fiber reinforced composites: Progress, performance, properties, applications, and future perspectives

Sanjay Mavinkere Rangappa et al.

Summary: The rise in environmental awareness worldwide has led researchers to focus on using cellulosic fibers as reinforcement in polymer matrices, which are cheap, renewable, and exhibit great potential for enhancing polymer composites. Cellulosic fiber reinforced composites have seen increasing use in various applications in recent years, benefiting fiber plant cultivation and the economy. Research in this area continues to attract interest from industry and academia, with potential applications in automotive, aerospace, construction, and other sectors.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Characteristics of electrical tree morphological in glass fibre reinforced epoxy resin under power frequency voltage

Yongqiang Wang et al.

Summary: This paper studied the influence of glass fibre arrangement on the growth morphology of electric dendrites, and experimental results show that the growth of electric dendrites is linear with multiple branches when the electric field is parallel to the glass fibres, while it is aggregated when the electric field is perpendicular to the glass fibres.

IET SCIENCE MEASUREMENT & TECHNOLOGY (2022)

添加到收藏夹

Article

Effect of Homogenization Pressure on Bacterial Cellulose Membrane Characteristic Made from Pineapple Peel Waste

Muhamad Muhajir et al.

Journal of Mechanical Engineering Science and Technology (2022)

添加到收藏夹

Article Thermodynamics

A reactive molecular dynamics study of the effects of an electric field on n-dodecane combustion

Efstratios M. Kritikos et al.

Summary: This study investigates the effect of externally applied electrostatic fields on the chemical kinetics of n-dodecane combustion at high temperatures through reactive Molecular Dynamics simulations. The results show that strong external electric fields are required to induce changes to the chemical kinetics, and the consumption rates of n-dodecane and oxygen exhibit different trends under various electrostatic field strengths. The kinetics of oxygen molecules play a primary role in determining the reaction behavior under external electrostatic fields.

COMBUSTION AND FLAME (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Network Formation and Physical Properties of Epoxy Resins for Future Practical Applications

Atsuomi Shundo et al.

Summary: This paper summarizes the knowledge on how network formation and physical state change in the curing process of epoxy resins affect the resulting network architecture and physical properties. It provides useful ideas for researchers who aim to design and construct various thermosetting polymer systems.

JACS AU (2022)

添加到收藏夹

Article Polymer Science

AC Electric-Field Assistant Architecting Ordered Network of Ni@PS Microspheres in Epoxy Resin to Enhance Conductivity

Zhiliang Han et al.

Summary: In this study, nickel-coated polystyrene microspheres were assembled into a 3-dimensional network within epoxy resin with the assistance of an electric field, achieving a balance between low loading of conductor filler and high conductivity. The morphology evolution was observed using optical microscopy and scanning electron microscopy, while the response speed of the microspheres to the electric field was investigated by measuring viscosity and shear stress variations. The alignment of the microspheres into a pearl-like structure significantly enhanced the conductivity compared to the pristine one, with a maximum enhancement achieved at 15 wt. % of microspheres.

POLYMERS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

DFT Studies of Selected Epoxies with Mesogenic Units-Impact of Molecular Structure on Electro-Optical Response

Magdalena Wlodarska et al.

Summary: Theoretical studies were conducted on three epoxy compounds with different mesogenic cores, investigating their molecular structure and electric charge distribution and comparing them to analogous materials with non-polar chains. The results provide insights into the electronic properties of liquid crystal phases and polymer networks, as well as the influence of molecular alignment in electric fields.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

添加到收藏夹

Article Polymer Science

Influence of the Epoxy Resin Process Parameters on the Mechanical Properties of Produced Bidirectional [±45°] Carbon/Epoxy Woven Composites

Claudia A. Ramirez-Herrera et al.

Summary: This study focused on investigating the curing process of an epoxy-based resin designed for aerospace applications. The results showed that specific curing processing conditions lead to an enhancement of the composite mechanical properties.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Interface Modification, Water Absorption Behaviour and Mechanical Properties of Injection Moulded Short Hemp Fiber-Reinforced Thermoplastic Composites

Joao P. Manaia et al.

Summary: The study investigated the effects of maleic anhydride, stearic acid, and water absorption on short hemp fiber-reinforced thermoplastic composites. It was found that the addition of maleic anhydride and stearic acid improved water resistance and slightly increased flexural properties of composites based on a high-density polyethylene matrix. Water absorption was shown to follow the Fickian mode of diffusion, with degradation of matrix-fiber interfacial bonding leading to a reduction in flexural properties.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Composites

Microwave curing kinetics of carbon-fiber-reinforced epoxy composites by wet filament winding process

Mengying Li et al.

Summary: A high-performance compound epoxy resin system suitable for wet filament winding was designed with improved properties. Through comparing the curing behavior of thermal and microwave curing composites, it was found that microwave curing exhibited higher curing degree and reaction rate in the early and middle stages. However, in the later stages of curing, the difference between the two methods was minimal.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Chemistry, Physical

Modification of the Properties of Polymer Composites in a Constant Magnetic Field Environment

Ewa Miekos et al.

Summary: Polymer composites based on polylactide and epoxy resin were studied for their changes in physicochemical properties under magnetic induction. The addition of different admixtures and the application of magnetic induction were found to alter the properties of the composites, leading to the development of new alternative materials that degrade faster.

MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations

Azizatul Karimah et al.

Summary: Understanding the basic properties of natural fibers is crucial for determining their optimal uses, such as high-quality bio-composite raw materials. This review discusses the characteristics and potential uses of natural fibers, emphasizing their sustainability and economic values. The low density and high strength to weight ratio of natural fibers make them ideal for lightweight composites and reinforcement materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Composites

The influence of fiber surface profile and roughness to fiber-matrix interfacial properties

Ichsan Setya Putra et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of curing temperature conditions on glass transition temperature values of epoxy polymer used for wet lay-up applications

M. Michel et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

Polarization study of poly(vinylidene fluoride) films under cyclic electric fields

Shuang Qin et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Crystallization and Microstructure Evolution of Microinjection Molded Isotactic Polypropylene with the Assistance of Poly(Ethylene Terephthalate)

Zhongguo Zhao et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The water absorption, mechanical and thermal properties of chemically treated woven fan palm reinforced polyester composites

Kusmono et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Recent advancements of plant-based natural fiber-reinforced composites and their applications

Mi Li et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electric-Field Mediated Chemistry: Uncovering and Exploiting the Potential of (Oriented) Electric Fields to Exert Chemical Catalysis and Reaction Control

Sason Shaik et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Review Materials Science, Textiles

A review on synthesis and characterization of commercially available natural fibers: Part-I

P. Madhu et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Article Materials Science, Textiles

The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface Characterization

M. R. Sanjay et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Article Chemistry, Physical

Water in an electric field does not dance alone: The relation between equilibrium structure, time dependent viscosity and molecular motions

Andreas Baer et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Chemistry, Physical

On the effect of electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes-epoxy composites

M. V. C. Morais et al.

CARBON (2019)

添加到收藏夹

Article Polymer Science

Optimization of the Curing and Post-Curing Conditions for the Manufacturing of Partially Bio-Based Epoxy Resins with Improved Toughness

Diego Lascano et al.

POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Kenaf Composites for Automotive Components: Enhancement in Machinability and Moldability

Nabilah Afiqah Mohd Radzuan et al.

POLYMERS (2019)

添加到收藏夹

Article Materials Science, Composites

Flax fiber and its composites: An overview of water and moisture absorption impact on their performance

Abdul Moudood et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)

添加到收藏夹

Article Materials Science, Textiles

Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences

M. R. Sanjay et al.

JOURNAL OF INDUSTRIAL TEXTILES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial adhesion assessment in flax/epoxy and in flax/vinylester composites by single yarn fragmentation test: Correlation with micro-CT analysis

M. C. Seghini et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Materials Science, Composites

Improved Thermal and Mechanical Performance of Ramie Fibers Reinforced Poly(Lactic Acid) Biocomposites Via Fiber Surface Modifications and Composites Thermal Annealing

Dereje Kebebew Debeli et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Chemistry, Physical

Cure Cycle Optimization of Rapidly Cured Out-Of-Autoclave Composites

Anqi Dong et al.

MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Electric field induced surface modification and impermeability enhancement for a polymer film

Zhenliang Feng et al.

AIP ADVANCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Critical length and interfacial strength of PALF and coir fiber incorporated in epoxy resin matrix

Fernanda Santos da Luz et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

添加到收藏夹

Article Chemistry, Applied

Effect of moderate electric fields in the properties of starch and chitosan films reinforced with microcrystalline cellulose

Caroline C. S. Coelho et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-scale modelling of carbon nanotube reinforced crosslinked interfaces

Elif Ozden-Yenigun et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of an Electric Field on Interaction of Aromatic Systems

Il Seung Youn et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2016)

添加到收藏夹

Review Engineering, Manufacturing

A review of recent developments in natural fibre composites and their mechanical performance

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simulation on the Microvaristor Chain Formation in Liquid Epoxy under Electric Field

Daigo Komesu et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Oriented electric fields as future smart reagents in chemistry

Sason Shaik et al.

NATURE CHEMISTRY (2016)

添加到收藏夹

Article Polymer Science

Self-toughening of epoxy resin through controlling topology of cross-linked networks

Nan Tian et al.

POLYMER (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structure, morphology and properties of epoxy networks with dangling chains cured by anhydride

Longhan Ba et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlled growth of silver nanoparticles on carbon fibers for reinforcement of both tensile and interfacial strength

Caifeng Wang et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Polymer Science

Improvement of Interfacial Shear Strength of Mendong Fiber (Fimbristylis globulosa) Reinforced Epoxy Composite Using the AC Electric Fields

Heru Suryanto et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Article Materials Science, Textiles

Morphology, Structure, and Mechanical Properties of Natural Cellulose Fiber from Mendong Grass (Fimbristylis globulosa)

Hero Suryanto et al.

JOURNAL OF NATURAL FIBERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Self-assembled tunable networks of sticky colloidal particles

Arnaud Demortiere et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Novel method for determination of critical fiber length in short fiber carbon/carbon composites by double lap joint

Daniel Heim et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Polymer Science

Liquid crystalline epoxy resin based on biphenyl mesogen: Effect of magnetic field orientation during cure

Yuzhan Li et al.

POLYMER (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Influence of Electric Field on SERS: Frequency Effects, Intensity Changes, and Susceptible Bonds

Sharath Sriram et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial studies of natural fibre/polypropylene composites using single fibre fragmentation test (SFFT)

A. Awal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Materials Science, Composites

Effect of External Electric Field on the Microstructures and Properties of Carbon Nanotubes/Thermosets Nanocomposites

Jingkuan Duan et al.

POLYMER COMPOSITES (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.