☆ 4.7 Article

Toughness enhancement of PP/EVA/LDH composites by controlling β nucleating agent and annealing treatment

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Comparative study on annealing-induced high-impact toughness of linear and grafted polypropylene random copolymer

Jingru Liu et al.

Summary: The comparative study on the annealing-induced high impact toughness of linear and grafted polypropylene random copolymer (PPR and MPP) was conducted. It was found that PPR displayed higher flexural modulus and impact strength, as well as lower elongation at break than MPP. After thermal annealing treatment, the crystallinity and impact strength of PPR were significantly increased compared to those of MPP.

POLYMERS FOR ADVANCED TECHNOLOGIES (2023)

添加到收藏夹

Article Chemistry, Applied

In-situ growth of layered double hydroxide on montmorillonite nanosheets to improve the flame retardant performance of ABS resin

Bainian Wang et al.

Summary: In this study, LDH was grown on MMT nanosheets to obtain the hybrid LM, which showed a periodically alternating layered structure. The ABS composite containing LM and IFR exhibited improved flame-retardant performance and had lesser impacts on its mechanical properties in cone calorimeter tests.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Synergistic effect of β-nucleating agent and layered double hydroxide on high toughness of polypropylene composites

Xincheng Guo et al.

Summary: The content ratio of layered double hydroxide (LDH) and beta-nucleating agent (CaHA), mechanical properties, and crystallization behaviors of PP/ethylene vinyl acetate copolymer (EVA)/LDH ternary composites are investigated. The highest notched impact strength is achieved in the 6PEL2 sample with CaHA of 0.03 phr and LDH of 5.70 phr, which is about 100% higher than that of pure PP. This is attributed to the highest relative content of beta-crystals in 6PEL2 and the formation of a large number of cavities absorbing the impact energy.

POLYMER ENGINEERING AND SCIENCE (2023)

添加到收藏夹

Article Polymer Science

Design and Fabrication of a Novel LDH@GO Nanohybrid Material for Its Application Potentials in Polypropylene

Lingtong Li et al.

Summary: A novel DOPOi-LDH@GO hybrid nanomaterial was fabricated to improve the dispersity and compatibility of layered double hydroxide (LDH) in polypropylene (PP) matrix. The thermal stability and crystallization behaviors of PP/DOPOi-LDH@GO nanocomposites were significantly different from neat PP, with lower thermal stability and decreased spherulite size.

JOURNAL OF POLYMER RESEARCH (2022)

添加到收藏夹

Article Chemistry, Applied

Effects of compatibilizers on microstructural and viscoelastic properties of polypropylene/polybutadiene thermoplastics vulcanizates

Somayeh Rafiei et al.

Summary: Compatibilized thermoplastic vulcanizates (TPVs) based on polypropylene (PP) and polybutadiene rubber (PBR) were studied in terms of their morphology, rheology, and dynamic mechanical properties. The addition of compatibilizer led to finer and more uniform distribution of rubber domains in both 30/70 and 40/60 blends, with only the 40/60 composition showing a co-continuous morphology. Rheology results were highly influenced by the content of compatibilizer, and the incorporation of PBR into PP resulted in enhanced elastic response, particularly in the 30/70 composition. Dynamic mechanical analysis confirmed the enhanced compatibility of TPVs with the addition of a compatibilizer.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

添加到收藏夹

Article Polymer Science

Flammability, thermal stability, and mechanical properties of ethylene-propylene-diene monomer/polypropylene composites filled with intumescent flame retardant and inorganic synergists

Can Chen et al.

Summary: The study found that in EPDM/PP/IFR composites, the synergistic effect of ZB and EG with IFR is better than OMMT. The addition of inorganic particles improves the thermal stability of the composites and forms dense char layers. Additionally, composites with inorganic particles exhibit more rubber-filler interaction, restricting the movement of rubber chains.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Rheological and thermal properties of polypropylene blends based in a low molecular weight EVA

Anibal G. Ferrofino et al.

Summary: Blends of PP and EVA with a viscosity ratio of 240 showed a two-phase structure with EVA domains dispersed in the PP matrix, with increasing domain size and crystallization temperature with EVA concentration. The interfacial tension between PP and EVA was found to be very small. Additionally, the presence of EVA increased the degradation temperature and rate of PP.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Micropore formation and crystalline evolution during biaxial stretching process of iPP film constructed of ordered and continuous β-transcrystallinity

Guixue Liang et al.

Summary: The direction of beta lamellae arrangement along the force field plays a key role in micropore formation and crystalline evolution, resulting in higher porosity and better separation performance for microporous membranes stretched from beta transcrystalline films.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Coupling effects of toughening modification and solid die-drawing process on the morphology and mechanical properties of PP/TMB-5 composites with POE

Xiehuai Luo et al.

Summary: In this study, highly oriented PP/TMB-5 composites and PP/POE/TMB-5 composites were prepared via solid die-drawing, with the addition of POE particles leading to further improvement in toughness and an increase in tensile and impact strength of the materials.

JOURNAL OF POLYMER RESEARCH (2021)

添加到收藏夹

Article Materials Science, Composites

Toughening mechanism of PP/EPR/SiO2 composites with superior low-temperature toughness

Shunjie Zhao et al.

Summary: This study investigated the toughening mechanism of iPP/EPR/SiO2 composites at low temperatures. It was found that the synergistic regulation of T-bd by EPR and SiO2, as well as the increase in silica content, could effectively enhance the low-temperature toughness of the composites. Additionally, the proposed toughening mechanism involved the increased internal friction loss induced by the expanded phase interfacial area between EPR and iPP matrix, leading to high-elastic deformation and ductile fracture behavior in the composite at low temperatures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Enhancing the mechanical, morphological, and rheological behavior of polyethylene/polypropylene blends with maleic anhydride-grafted polyethylene

Antimo Graziano et al.

Summary: This study demonstrates the effectiveness of using MAPE to compatibilize PE-rich blends with PP as the minor phase, resulting in improved mechanical properties and reduced viscosity mismatch and interfacial tension.

POLYMER ENGINEERING AND SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultra-Low Percolation Threshold Induced by Thermal Treatments in Co-Continuous Blend-Based PP/PS/MWCNTs Nanocomposites

Daria Strugova et al.

Summary: This study investigated the effect of PP crystallization on its electrical conductivity and electrical percolation threshold in a blend with PS containing MWCNTs. By utilizing a two-step approach and specific thermal treatments, ultra-low PT values were achieved for the PP/PS/MWCNTs system, attributed to volume exclusion of PP crystals without altering the blend morphology.

NANOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Thermal conductivity enhancement of PLA/TPU/BN composites by controlling BN distribution and annealing treatment

Wanting Shen et al.

PLASTICS RUBBER AND COMPOSITES (2020)

添加到收藏夹

Article Engineering, Chemical

Comprehensively improved mechanical properties of silane crosslinked polypropylene/ethylene propylene diene monomer elastomer blends

Hui Peng et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Engineering, Environmental

Performance and mechanisms of wastewater sludge conditioning With slag-based hydrotalcite-like minerals (Ca/Mg/Al-LDH)

Weijun Zhang et al.

WATER RESEARCH (2020)

添加到收藏夹

Article Engineering, Chemical

Phase-selective micro-structural effects on rheological-networks, segmental relaxation, and electrical conductivity behavior of melt-mixed polyamide-12/polypropylene-multi walled carbon nanotubes ternary nanocomposites

Sucharita Sethy et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Studies on conducting polymer intercalated layered double hydroxide nanocomposites: Antituberculosis drug delivery agents

Ufana Riaz et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

Effectively toughening polypropylene with in situ formation of core-shell starch-based particles

Guangxin Wang et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Materials Science, Composites

Simultaneously improving the toughness and stiffness of wood flour/polypropylene composites using elastomer A669/talcum blends

Jianxiu Hao et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Engineering, Environmental

Polydopamine particles as a β-nucleating agent and antioxidant for isotactic polypropylene

Shixiang Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Analytical

Adsorption of phosphate from wastewater by a ZnO-ZnAl hydrotalcite

Zhanmeng Liu et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Polymer Science

Nonisothermal Crystallization Kinetics of Acetylated Bamboo Fiber-Reinforced Polypropylene Composites

Yu-Shan Jhu et al.

POLYMERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel approach of preparing zinc adipate as β-nucleating agent for polypropylene engineering

Wenli Peng et al.

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Article Engineering, Manufacturing

Cooperative influences of nanoparticle localization and phase coarsening on thermal conductivity of polypropylene/polyolefin elastomer blends

Xi Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Glycerol aerobic oxidation to glyceric acid over Pt/hydrotalcite catalysts at room temperature

Junbo Zhang et al.

SCIENCE BULLETIN (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flame-retardant and smoke-suppressing wood obtained by the in situ growth of a hydrotalcite-like compound on the inner surfaces of vessels

Shuai Lv et al.

NEW JOURNAL OF CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Physical

Ce/MgAl mixed oxides derived from hydrotalcite LDH precursors as highly efficient catalysts for ketonization of carboxylic acid

Binbo Jiang et al.

CATALYSIS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Chemical

Effect of Graphene on Polypropylene/Maleic Anhydride-graft-Ethylene–Vinyl Acetate (PP/EVA-g-MA) Blend: Mechanical, Thermal, Morphological, and Rheological Properties

Anish Mathai Varghese et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highest recorded electrical conductivity and microstructure in polypropylene-carbon nanotubes composites and the effect of carbon nanofibers addition

C. A. Ramirez-Herrera et al.

APPLIED NANOSCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Remarkably improving the fire-safety of polypropylene by synergism of functionalized ZrP nanosheet and N-alkoxy hindered amine

Huali Xie et al.

APPLIED CLAY SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Influence of β-nucleating agent dispersion on the crystallization behavior of isotactic polypropylene

Hui Niu et al.

POLYMER (2018)

添加到收藏夹

Article Crystallography

Improving the impact strength of polypropylene/carbon fiber composites via β-modification and annealing treatment

Xinling Liu et al.

POLYMER CRYSTALLIZATION (2018)

添加到收藏夹

Article Polymer Science

Study on low temperature toughness and crystallization behavior of polypropylene random copolymer

Yingchun Li et al.

JOURNAL OF POLYMER ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

The effect of organoclay and graphene on the crystallization of PP in ABS/PP blends

Marianna I. Triantou et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Effects of Thermoplastic Polyurethane on the Structure and Mechanical Properties of Modified Polypropylene Blends

Ting An Lin et al.

APPLIED SCIENCES-BASEL (2017)

添加到收藏夹

Article Chemistry, Physical

The chemical modification and characterization of polypropylene membrane with environment response by in-situ chlorinating graft copolymerization

Yue Zhang et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Impact toughness of polypropylene/glass fiber composites: Interplay between intrinsic toughening and extrinsic toughening

Bowen Yu et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method

Fatemeh Khademi et al.

POLYMER ENGINEERING AND SCIENCE (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

Tailoring of interface of polypropylene/polystyrene/carbon nanofibre composites by polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene

Jyotishkumar Parameswaranpillai et al.

POLYMER TESTING (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Hanying Tang et al.

SCIENCE CHINA-CHEMISTRY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A facile method to prepare polypropylene/poly(butyl acrylate) alloy via water-solid phase suspension grafting polymerization

Zhuo Li et al.

CHINESE CHEMICAL LETTERS (2015)

添加到收藏夹

Article Polymer Science

Kinetic and thermodynamic control in conductive PP/PMMA/EAA carbon black composites

Paul J. Brigandi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergistic improvement of toughness of isotactic polypropylene: The introduction of high density polyethylene and annealing treatment

Xiang Zhou et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Toughening of polypropylene with β-nucleated thermoplastic vulcanizates based on polypropylene/ethylene-propylene-diene rubber blends

Li-Feng Ma et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Manufacturing

Synergistic effects of toughening of nano-CaCO3 and toughness of β-polypropylene

Zishou Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Polymer Science

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

Ruifen Chen et al.

POLYMER (2011)

添加到收藏夹

Article Polymer Science

Crystallization behavior and melting characteristics of PP nucleated by a novel supported β-nucleating agent

Zishou Zhang et al.

POLYMER (2008)

添加到收藏夹

Article Materials Science, Composites

Effect of Zeolite 5A on the Crystalline Polypropylene (PP) in PP/β-Nucleating Behavior of Agent System

Zhiping Lv et al.

POLYMER COMPOSITES (2008)

添加到收藏夹

Article Engineering, Chemical

Effect of the compatibility on toughness of injection-molded polypropylene blended with EPR and SEBS

Y Matsuda et al.

POLYMER ENGINEERING AND SCIENCE (2006)

添加到收藏夹

Article Polymer Science

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

XF Zhang et al.

EUROPEAN POLYMER JOURNAL (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.