☆ 4.7 Article

Experimental and simulation studies of hybrid MWCNT/montmorillonite reinforced FDM based PLA filaments with multifunctional properties enhancement

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Biotechnology & Applied Microbiology

Removal of amoxicillin and ampicillin using manganese dioxide/montmorillonite composite

Vera Valovicova et al.

Summary: The study successfully prepared a manganese dioxide/montmorillonite composite and demonstrated its efficient sorption capability for two antibiotics in aqueous solution. The research provides valuable insights for the design of cost-effective clay-based adsorbents.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

The Emergence of Reversible-Deactivation Radical Polymerization in 3D Printing

Valentin A. Bobrin et al.

Summary: The majority of materials used in vat photopolymerization 3D printing are effectively dead materials as they cannot be easily modified. However, the development of photocontrolled reversible-deactivation radical polymerization (photoRDRP) techniques in 3D printing has provided access to advanced materials with properties such as on-demand editing, self-healing, and control over nanostructuration and mechanical properties.

ADVANCED MATERIALS TECHNOLOGIES (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Printing of Aramid Nanofiber Composites by Stereolithography

Sachini D. Perera et al.

Summary: In this study, a methodology for incorporating aramid nanofibers (ANFs) into a 3D-printable photoresin as a dispersion was described. The solvent-exchange process was used to limit anisotropic shrinkage and cracking of the printed polymer. By incorporating 0.60 wt% ANFs, significant improvements in tensile strength, toughness, and Young's modulus were achieved.

ACS APPLIED NANO MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electroluminescence from Single-Walled Carbon Nanotubes with Quantum Defects

Min-Ken Li et al.

Summary: This work demonstrates that electroluminescence excitation is selective towards neutral defect-state configurations with the lowest transition energy, which, combined with gate control, leads to high spectral purity.

ACS NANO (2022)

添加到收藏夹

Article Materials Science, Composites

One-step fabrication of highly sensitive pressure sensor by all FDM printing

Huiying Zhang et al.

Summary: A highly sensitive pressure sensor with a sandwich structure was developed using a double nozzle FDM printer. The sensor, consisting of high beta phase composite and conductive PVDF composite, demonstrated high sensitivity and excellent long-term stability.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Green product innovation: A means towards achieving global sustainable product within biodegradable plastic industry

Taofeeq D. Moshood et al.

Summary: Green innovativeness plays a vital role in economic progress, environmental sustainability, and improved living standards. This study aims to understand the motivations, strategies, and challenges of incorporating sustainable development issues into biodegradable plastic product innovation. Biodegradable materials have the potential to replace traditional plastics and contribute to a circular economy. However, the success of their adoption depends on convincing consumers, manufacturers, and regulators of their efficacy.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of polymer nanocomposites with randomly dispersed and cross-linked two-dimensional diamond

Chengkai Li et al.

Summary: This study systematically assessed the tensile performance of PMMA nanocomposites reinforced by randomly dispersed diamond fillers using molecular dynamics simulation. It was found that randomly dispersed diamond fillers effectively enhance the tensile properties of PMMA, and the enhancement effect can be further improved by cross-linking. The alignment of diamond fillers also influences the enhancement effect, with better tensile performance observed when the fillers are uniformly aligned.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Environmental

Insights into growth-promoting effect of nanomaterials: Using transcriptomics and metabolomics to reveal the molecular mechanisms of MWCNTs in enhancing hyperaccumulator under heavy metal(loid)s stress

Xunfeng Chen et al.

Summary: This study demonstrates that the application of MWCNTs can promote the growth of Solanum nigrum, particularly under heavy metal stress, by increasing plant growth rate, enhancing antioxidative enzyme activity, regulating metabolic processes, and affecting reprogramming of defense systems.

JOURNAL OF HAZARDOUS MATERIALS (2022)

添加到收藏夹

Article Materials Science, Composites

Composite fibrous membrane comprising PLA and PCL fibers for biomedical application

Siyi Zhang et al.

Summary: In this study, biodegradable composite fibrous membranes (CFM) composed of poly(lactic acid) and polycaprolactone fibers were fabricated via multi-spinnerets blended electrospinning. The morphology, composition, wetting behavior, and mechanical properties of the CFM were investigated. The CFM showed good biocompatibility and supported cell proliferation, making them suitable for biomedical applications.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Green product innovation: A means towards achieving global sustainable product within biodegradable plastic industry

Taofeeq D. Moshood et al.

Summary: Green innovativeness has been seen as a critical driver for economic progress, environmental sustainability, and improved living standards, with a focus on sustainability and innovation. This study aims to understand the motivations, strategies, and challenges of integrating sustainable development issues into biodegradable plastic product innovation. The findings suggest that firms are motivated to produce biodegradable plastic for various reasons and environmental regulations can provide both opportunities and limitations for businesses.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A self-assembled montmorillonite-carbon nanotube hybrid nanoreinforcement for poly-L-lactic acid bone scaffold

C. Shuai et al.

Summary: This study successfully improved the uniform dispersion of MMT and CNT in biopolymer by forming self-assembled MMT-CNT hybrid nanostructure through intercalating ammonium salt-grafted CNT into MMT interlayers. The mechanical properties and biocompatibility of the poly-L-LACTIC ACID scaffold were enhanced, showing increased tensile strength, modulus, compressive strength, modulus, hydrophilicity, degradability, and cell affinity.

MATERIALS TODAY ADVANCES (2021)

添加到收藏夹

Review Polymer Science

Effect of rigid nanoparticles and preparation techniques on the performances of poly(lactic acid) nanocomposites: A review

Olawale M. Sanusi et al.

Summary: The study discusses various methods for preparing functional PLA nanocomposites, emphasizing the strengths and weaknesses of each method, as well as the achieved properties enhancement for targeted applications.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Rational design of two-dimensional nanofillers for polymer nanocomposites toward multifunctional applications

Xi Shen et al.

Summary: Nanocomposites of 2D nanostructured fillers embedded in a polymer matrix offer ample opportunities for designing multifunctional materials with exceptional properties. Rational assembly of various 2D materials with controlled structures enables the creation of composites with tailored properties for novel applications. Advanced synthesis and assembly techniques, along with multiscale structural characteristics, are key for developing composites with multifunctional properties across different scales for emerging applications.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of montmorillonite/carbon nanotube hybrid nanofillers on the properties of poly(lactic acid)

Olawale Monsur Sanusi et al.

Summary: In this study, a hybrid nanofiller of Mt and MWCNT was successfully prepared and incorporated into PLA matrix to improve the material properties. Physicochemical studies and structural analyzes revealed strong hybrid-polymer interaction and synergy between nanoclay and carbon nanotubes. Thermal characterizations and mechanical properties testing demonstrated that the Mt/MWCNT hybrid nanofillers effectively restricted the motion of PLA segments and enhanced the mechanical performance of the polymer matrix.

APPLIED CLAY SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Synthesis-structure-performance relationships of nanocomposite polymeric ultrafiltration membranes: A comparative study of two carbon nanofillers

Zhishang Wan et al.

Summary: This study compared the effects of two carbon nanofillers in ultrafiltration membranes, revealing the importance of morphological factors in evaluating the impact of nanofillers on membrane formation. Additionally, the main benefit of adding carbon nanofillers was found to be the enhancement of rejection of negatively charged molecules.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

MXene as emerging nanofillers for high-performance polymer composites: A review

Kaili Gong et al.

Summary: MXenes, as a rising star in the 2D material family, exhibit charming physical and chemical properties due to their unique graphene-like structures and abundant functional groups. They show advantages in combining with polymer matrices and have been widely applied in various fields like electrical, thermal, and mechanical. MXenes play a vital role in developing high-performance composite materials and have considerable prospects in the future.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Composites

Polymer-based filament feedstock for additive manufacturing

Soyeon Park et al.

Summary: Fused deposition modeling (FDM) is a manufacturing method based on polymer melting and extrusion, which has attracted attention in various fields. Understanding the properties and behavior of polymer systems is crucial for using polymer composite materials in manufacturing and printing, and plays a key role in advancing additive manufacturing.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized via air-plasma treatment

Francesco Lopresti et al.

Summary: The study evaluated the physical and biological properties of polylactic acid electrospun mats coated with Kefir, using various experimental methods. The results demonstrated that direct coating from Kefir/water solutions is an effective approach to prepare hybrid scaffolds with tunable properties, and plasma pre-treatment enhances the affinity between polylactic acid and Kefir.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Engineering, Environmental

Are micro- and nanoplastics from soil-biodegradable plastic mulches an environmental concern?

Yingxue Yu et al.

Summary: Micro-and nanoplastics are inevitably generated from biodegradable plastics during weathering and degradation, with the environmental risk depending on size, concentration, exposure time, and polymer characteristics. Proper disposal of soil-biodegradable plastic mulches can limit environmental harm, while inappropriate disposal may lead to environmental impacts.

JOURNAL OF HAZARDOUS MATERIALS ADVANCES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Chitosan/carbon nanotube hybrids: recent progress and achievements for industrial applications

Shadpour Mallakpour et al.

Summary: Chitosan, a versatile and bio-based amino polysaccharide, is being used in various areas such as water remediation, biomedicine, and sensors. By combining with fillers like carbon nanotubes, its performance can be enhanced. Recent research development focuses on the application of these promising nanomaterials in sensors, pollution management, and biomedicine.

NEW JOURNAL OF CHEMISTRY (2021)

添加到收藏夹

Article Polymer Science

High-performance thermoplastic polyurethane nanocomposites induced by hybrid application of functionalized graphene and carbon nanotubes

Amir Rostami et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Selective dispersion of carbon nanotubes and nanoclay in biodegradable poly(ε-caprolactone)/poly(lactic acid) blends with improved toughness, strength and thermal stability

Bo Zhu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Unsaturated Polyester Nanocomposites via Hybrid 3D POSS-Modified Graphene Oxide Reinforcement: Electro-Technical Application Perspective

Nidhin Divakaran et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Polymer Science

Electrical and Thermal Conductivity of Polylactic Acid (PLA)-Based Biocomposites by Incorporation of Nano-Graphite Fabricated with Fused Deposition Modeling

Rui Guo et al.

POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Impact modification of PLA using biobased biodegradable PHA biopolymers

Ivana Burzic et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Polymer Science

High Performance Attapulgite/Polypyrrole Nanocomposite Reinforced Polystyrene (PS) Foam Based on Supercritical CO2 Foaming

Yidong Liu et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Manufacturing

M-rGO-ZnNi-LDH exfoliated WEP nanocomposites: Effects of nanosheets on the mechanical and thermal properties

Duraisami Dhamodharan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recyclable Cytokines on Short and Injectable Polylactic Acid Fibers for Enhancing T-Cell Function

Hyun Mu Shin et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Polymer Science

Thermal Properties of Porous Polylactide

L. S. Shibryaeva et al.

POLYMER SCIENCE SERIES A (2019)

添加到收藏夹

Article Polymer Science

Rheology provides insight into flow induced nano-structural breakdown and its recovery effect on crystallization of single and hybrid carbon nanofiller filled poly(lactic acid)

Amir Rostami et al.

POLYMER (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Poly(vinylidene fluoride)/polycarbonate blend-based nanocomposites with enhanced rigidity - Selective localization of carbon nanofillers and organoclay

Fang-Chyou Chiu

POLYMER TESTING (2017)

添加到收藏夹

Review Pharmacology & Pharmacy

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Shady Farah et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Article Agricultural Engineering

Process scale up and characterization of wood cellulose nanocrystals hydrolysed using bioethanol pilot plant

Aji P. Mathew et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

添加到收藏夹

Article Chemistry, Physical

Hybrid clay mineral-carbon nanotube-PLA nanocomposite films. Preparation and photodegradation effect on their mechanical, thermal and electrical properties

Giuliano Gorrasi et al.

APPLIED CLAY SCIENCE (2013)

添加到收藏夹

Article Polymer Science

Influence of nanoclays on electrical and morphological properties of thermoplastic polyurethane/multiwalled carbon nanotube/clay nanocomposites

Minho Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Physics, Applied

Synthesis of few-layered graphene by H2O2 plasma etching of graphite

Guixia Zhao et al.

APPLIED PHYSICS LETTERS (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.