Effect of moisture absorption on the flexural strength of phenolic matrix composites reinforced with glass fibers and aluminum oxide nanoparticles

In this research, the effect of adding aluminum oxide nanoparticles on the flexural strength of glass/phenolic composites that were exposed to water environment was experimentally investigated. To make glass/phenolic composites, IL-800 phenolic resin, H002 hardener, T400 bidirectional glass fibers and Al2O3 nanoparticles were used. Four-layer composite plates were made by hand layup method. Beam-shaped samples were extracted from the plates with the help of laser cutting method. Rectangular composite beams made of glass/phenolic and Al2O3/glass/phenolic were subjected to three-point flexural test. The moisture absorption test was continued until the amount of water absorption reached a constant level. Bending test was performed on the samples before and after immersion in water. Based on the results, the average flexural strength of the samples after water absorption shows a decrease of about 15%. This parameter is equal to 118.96 MPa for glass/phenolic composite samples immersed in water, and by adding 0.25 wt% of Al2O3 nanoparticles into the matrix material of glass/phenolic composite samples, the flexural strength reaches 142.54 MPa, which shows an increase of 19.82% compared to samples without nanoparticles. Furthermore, the amount of flexural modulus decreases after water absorption, and the addition of nanoparticles in the base material can compensate this reduction. Scanning electron microscopy images illustrate that the addition of Al2O3 nanoparticles into the phenolic resin can enhance the strength of matrix material and improve the adhesion of glass fibers to the resin.HighlightsAddition of nano Al2O3 reduces water absorption of glass/phenolic composites.Nano Al2O3 improves composite flexural strength after water absorption.Addition of nano Al2O3 increases the adhesion between the layers of the specimens. Effect of moisture absorption on the flexural strength of phenolic matrix nanocomposites.image

Automated summary

This study experimentally investigated the effect of adding aluminum oxide nanoparticles on the flexural strength of glass/phenolic composites exposed to water environment. The results showed that adding 0.25 wt% of nanoparticles significantly increased the flexural strength of the composites after water absorption.