4.7 Article

Study on interface insulation properties of Al2O3 epoxy composites using plasma jet-fluorinated etching/SiOx deposition

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

Fiber reinforced polypropylene composites interfacial behavior improvement fabricated by cold plasma jet SiOx nanoparticles deposition

Lin Zhang et al.

Summary: In this study, a cold atmospheric pressure plasma jet was used to modify the surface of glass fibers with tetraethyl orthosilicate as a precursor. SiOx nanoparticles were polymerized on the fiber surfaces to enhance the interfacial bonding forces of glass fiber reinforced polypropylene (GFRP) composites. The effect of nozzle-to-fiber distance (D) and treatment time (T) on the interfacial bonding behavior of GFRP composites was investigated. The optimal parameters were found to be D = 17 mm and T = 12 s, leading to a 30.79% increase in interlaminar shear strength compared to the control group. Further analysis revealed that plasma treatment increased surface roughness, surface energy, and the presence of oxygen-containing functional groups, contributing to the improvement in interlaminar shear strength.

JOURNAL OF COMPOSITE MATERIALS (2023)

Review Materials Science, Composites

A review on polymeric insulation for high-voltage application under various stress conditions

Sendil Kumar Angalane et al.

Summary: This paper provides an overview of the dielectric properties of polymeric materials under various stress conditions and reveals that polypropylene and random copolymer outperform other polymers in terms of insulation performance under different stress conditions.

POLYMER COMPOSITES (2022)

Article Materials Science, Composites

Enhancing surface insulation of epoxy composite by constructing nanofiller-skeleton charge channel

Guowei Xia et al.

Summary: This article proposes a method of using SiC skeleton to construct charge channel, which can enhance the surface insulation performance of epoxy composite. The study explores the synergistic influence mechanism of SiC and Al2O3 nanofillers and SiC skeleton on the surface flashover characteristics of epoxy resin. The results show that the SiC skeleton effectively enhances the surface insulation performance of epoxy resin and when Al2O3 nanofiller and SiC skeleton act simultaneously, the flashover voltage enhancement reached 13.65%.

POLYMER COMPOSITES (2022)

Article Materials Science, Composites

Enhancing surface insulation of glass fiber reinforced polymer composites by plasma fluorinating glass fiber

Jingwei Li et al.

Summary: In this study, glass fiber reinforced polymer (GFRP) composites with improved surface insulation property were prepared by fluorination of glass fiber using dielectric barrier discharge (DBD). The experimental results showed that the modified GFRP exhibited a significantly higher flashover voltage compared to the original sample. The analysis suggested that plasma fluorination raised the trap energy level of the composites, inhibiting carrier migration and increasing the flashover voltage. Moreover, increasing the number of fluorinated glass fiber layers improved the internal structure of the composites, enhancing the surface insulation properties in two ways.

POLYMER COMPOSITES (2022)

Article Engineering, Electrical & Electronic

A Fast Protection of Multi-Terminal HVDC System Based on Transient Signal Detection

Lian Liu et al.

Summary: A fast and reliable protection method for HVDC systems is proposed in this paper to address the various drawbacks in fault signal detection and timely clearance in existing protection solutions.

IEEE TRANSACTIONS ON POWER DELIVERY (2021)

Article Materials Science, Composites

Thermal-aging characteristics of epoxy/glass fiber composite materials for dry-type air-core reactors

Bo Bian et al.

Summary: Through accelerated thermal aging tests on epoxy/glass fiber samples, it was found that the surface insulation properties, dielectric properties, thermal properties, and mechanical properties deteriorate over time, mainly due to the detachment of glass fibers and breakage of the long chains in the matrix.

POLYMER COMPOSITES (2021)

Article Physics, Applied

Tailoring insulation surface conductivity for surface partial discharge mitigation

Chuanyang Li et al.

Summary: The method introduced in the text aims to mitigate surface partial discharge by tailoring insulation surface conductivity, with the developed surface coating effectively regulating surface charge migration and suppressing surface PD activity at DC voltage. This approach has significant application potential in various insulation designs for DC electric power equipment and other electronic devices.

APPLIED PHYSICS LETTERS (2021)

Article Materials Science, Composites

Study on the ageing effect of alumina/epoxy composites modified by atmospheric plasma jet

Yuchan Kang et al.

Summary: This study investigated the effects of atmospheric pressure Ar and Ar/CF4 plasma treatment on the surface properties and electrical performance of Al2O3/EP material. The treatment resulted in increased surface energy and hydrophilicity, leading to improved electrical properties. Changes in surface properties occurred within 100 days due to oxidation reactions and variations in chemical bonds after high-energy plasma treatment.

POLYMER COMPOSITES (2021)

Review Materials Science, Multidisciplinary

Restraining Surface Charge Accumulation and Enhancing Surface Flashover Voltage through Dielectric Coating

Jixing Sun et al.

Summary: This study discusses the charging characteristics, movement, and discharge of conductive metallic particles in gas-insulated systems, as well as the impact of coating materials and interface characteristics on particle behavior, and changes in electric field strength and charging state. The research findings show that coatings can effectively reduce the charge and discharge probability of metallic particles.

COATINGS (2021)

Article Engineering, Electrical & Electronic

Surface charge dissipation and DC flashover characteristic of DBD plasma treated epoxy resin/AlN nanocomposites

Xiangrong Chen et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2020)

Article Engineering, Electrical & Electronic

Effects of surface conductivity on surface charging behavior of DC-GIL spacers

Junhong Chen et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2020)

Review Green & Sustainable Science & Technology

HVDC Transmission: Technology Review, Market Trends and Future Outlook

Abdulrahman Alassi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Materials Science, Coatings & Films

Deposition of thin films containing carboxylic acid groups on polyurethane foams by atmospheric pressure non-equilibrium plasma jet

Vincenza Armenise et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Chemistry, Physical

Radical chain reaction mechanism of graphene fluorination

Wenchuan Lai et al.

CARBON (2018)

Article Nanoscience & Nanotechnology

Fluorination of an Alumina Surface: Modeling Aluminum-Fluorine Reaction Mechanisms

Richa Padhye et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

Free-Radical-Induced Grafting from Plasma Polymer Surfaces

Farid Khelifa et al.

CHEMICAL REVIEWS (2016)

Article Engineering, Electrical & Electronic

Dielectric Characteristics of Solid Insulation Materials With Respect to Surface Roughness

You Ho Kim et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)

Article Engineering, Electrical & Electronic

Surface Modification of Polymethyl-methacrylate Using Atmospheric Pressure Argon Plasma Jets to Improve Surface Flashover Performance in Vacuum

Tao Shao et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2015)

Review Chemistry, Multidisciplinary

Synthesis and application of epoxy resins: A review

Fan-Long Jin et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Correction Chemistry, Physical

Plasma enhanced atomic layer deposition of Ga2O3 thin films (vol 2, pg 19232, 2014)

Ranjith K. Ramachandran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Materials Science, Ceramics

Plasma enhanced aerosol-gel deposition of Al2O3 coatings

Bozena Pietrzyk et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

Article Materials Science, Coatings & Films

Atmospheric pressure plasma enhanced chemical vapor deposition of hydrophobic coatings using fluorine-based liquid precursors

Jacqueline H. Yim et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Article Materials Science, Ceramics

High-rate HMDSO-based coatings in open air using atmospheric-pressure plasma jet

H. Kakiuchi et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2012)

Article Chemistry, Physical

CF4 radio frequency plasma surface modification of silicone rubber for use as outdoor insulations

Song-Hua Gao et al.

APPLIED SURFACE SCIENCE (2009)

Article Engineering, Manufacturing

Continuous atmospheric plasma fluorination of carbon fibres

Kingsley K. C. Ho et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

Article Chemistry, Physical

Surface analysis of plasma grafted carbon fiber

Xuezhong Zhang et al.

APPLIED SURFACE SCIENCE (2006)