☆ 4.7 Article

Water diffusion behavior and transient internal stress analysis of steel/rubber composites

POLYMER (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

A novel multiscale parallel finite element method for the study of the hygrothermal aging effect on the composite materials

Meghdad Gholami et al.

Summary: A novel and comprehensive multiscale finite element analysis is proposed to study the effect of hygrothermal aging on fiber-reinforced composite materials. The study shows that under hygrothermal conditions, the elastic properties of the composite materials will significantly degrade.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Polymer Science

Hygrothermal aging and water absorption behavior of radial tire composites

Ning Jiang et al.

Summary: This study focused on the water absorption behavior and durability of RT composites in the hygrothermal environment. The results showed that water diffusion of RT composites followed Fickian's law in the initial stage, with kinetic parameters of water absorption closely related to temperature changes. Moisture led to poor interface and degradation of RT composites, with natural rubber matrix swelling and developing stresses that could cause microcracks.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Mechanics

Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading

S. V. Kuteneva et al.

Summary: This paper investigates the microstructure and mechanical properties of five-layered metal/rubber composites. The composites were produced by hot bonding of low carbon steel or/and aluminum alloy and rubber layers. Impact cyclic and fatigue tests were carried out to study the mechanical properties of the composites. The results show that the steel/rubber joint has a higher adhesion bond strength than the aluminum/rubber joint, and the composite with a steel and rubber component has a high impact strength and resistance to fatigue fracture.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Moisture transport in laminated wood and bamboo composites bonded with thin adhesive layers - A numerical study

Zahra Afshari et al.

Summary: Sustainable materials like laminated wood and bamboo composites are increasingly used in green building construction worldwide. This study aimed to develop and validate a physically-based tool to understand the transient moisture transport in layered orthotropic composites made from wood and bamboo. Results showed that the choice of adhesive and the physical properties of wood/bamboo significantly affected the panel's moisture profile.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Hydrothermal Aging Mechanisms of All-Steel Radial Tire Composites

Ning Jiang et al.

Summary: This study focuses on the effects of hydrothermal environment on the aging of all-steel radial tire (ASRT) composites. The results show that the mechanical properties of ASRT composites decrease due to the degradation of the rubber matrix and the poor interface between the steel fiber and rubber matrix during the hygrothermal aging process.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Civil

Fatigue life prediction of rubber-sleeved stud shear connectors under shear load based on finite element simulation

Xiaoqing Xu et al.

Summary: This study focused on the application of rubber-sleeved studs in the design of steel-concrete composite structures. A method for predicting fatigue life and formulas for shear connectors were proposed, with reliability verified through comparison with design codes and test results.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Fiber packing and morphology driven moisture diffusion mechanics in reinforced composites

Sabarinathan P. Subramaniyan et al.

Summary: This paper elucidates the impact of fiber packing and morphology on moisture diffusion in FRPC materials, and establishes a relationship between tortuosity and diffusivity. By studying the influence of impermeable fiber architectures on moisture diffusion pathways, the authors provide insight into calculating diffusivity using tortuosity for a given micro-architecture.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Composites

The reinforcement of styrene butadiene rubber composites with simple environmentally friendly aramid fiber modification

Yongchun Ji et al.

Summary: This study described three simple and environmentally friendly methods for surface treatment of aramid fiber. The results showed that the mechanical properties of composites with coated aramid fiber were significantly improved compared to those with aramid fiber treated by thermal oxidation, although the heat generation was higher. The thermal oxidation method not only improved the constant elongation stress and tear strength, but also reduced the heat generation of the materials.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Modeling and experimental study of tire deformation characteristics under high-speed rolling condition

Xueliang Gao et al.

Summary: A combined approach for studying tire rolling deformation is proposed in this research, utilizing an extended flexible ring tire model and a three-dimensional high-speed stereo vision system to accurately predict tire deformation and measure high-speed rolling tire deformations. Experimental results reveal different deformations in the radial and tangential directions of rolling tires, with vertical load having a more significant influence than tire pressure on rolling deformation. The capability of the improved ring tire model to describe these observed phenomena has been validated through comparisons between simulations and measurements.

POLYMER TESTING (2021)

添加到收藏夹

Review Mechanics

Analysis of the hygroscopic and hygroelastic behaviours of water aged flax-epoxy composite

Belahcen Djellouli et al.

Summary: The study presents an analysis of the hygroscopic and hygroelastic behaviors of unidirectional flax fibre-reinforced epoxy composite. Through experiments and finite element simulations, it was found that water diffusion in the composite material exhibits a directional preference, leading to high compressive and tensile stresses in flax fibres and epoxy matrix during water absorption.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Development of a multiphysics model of synergistic effects between environmental exposure and damage in woven glass fiber reinforced polymeric composites

Zhiye Li et al.

Summary: This paper introduces a structure level multiphysics model that integrates a nonlocal continuum damage model in a curvilinear coordinate system using UV and moisture deterioration variables homogenized from a micromechanics model. By linking the application of analysis to the architecture or manufacturing digital model, more accurate predictions of mechanical performance can be obtained.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Polymer Science

Effects of a novel hindered phenol samarium complex on the thermo-oxidative aging of styrene-butadiene rubber/silica composites

Yangkun Sun et al.

Summary: A novel rare-earth complex DTSm significantly improved the long-term thermo-oxidative aging resistance of SBR/silica composites without discoloration, showing excellent volatility resistance and solvent extraction resistance. The outstanding antioxidative ability of DTSm was attributed to its unique chemical structure and synergistic antioxidative effect.

POLYMER DEGRADATION AND STABILITY (2021)

添加到收藏夹

Article Materials Science, Composites

Effect of saline and alkaline solution aging on the properties of jute/poly(lactic acid) composites

Ning Jiang et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Engineering, Environmental

Evaluation of drawbar performance of winter tyres for special purpose vehicles

Maurizio Cutini et al.

JOURNAL OF TERRAMECHANICS (2020)

添加到收藏夹

Article Materials Science, Composites

3D finite element modeling of water diffusion behavior of jute/PLA composite based on X-ray computed tomography

Ning Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Polymer Science

Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)

Ning Jiang et al.

POLYMER DEGRADATION AND STABILITY (2020)

添加到收藏夹

Article Polymer Science

Water Absorption Kinetics in Natural Rubber Composites Reinforced with Natural Fibers Processed by Electron Beam Irradiation

Elena Manaila et al.

POLYMERS (2020)

添加到收藏夹

Article Mechanics

Analysis of moisture diffusion induced stress in carbon/epoxy 3D textile composite materials with voids by μ-CT based Finite Element Models

Y. Sinchuk et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Environmental

Effect of Hydrothermal Aging on Injection Molded Short Jute Fiber Reinforced Poly(Lactic Acid) (PLA) Composites

Ning Jiang et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

添加到收藏夹

Article Materials Science, Composites

Hygrothermal Effect on Moisture Kinetics and Mechanical Properties of Hemp/Polypropylene Composite: Experimental and Numerical Studies

Lotfi Toubal et al.

POLYMER COMPOSITES (2016)

添加到收藏夹

Article Materials Science, Composites

Meso-Scale Modeling to Characterize Moisture Absorption of 3D Woven Composite

Yuan Yuan et al.

APPLIED COMPOSITE MATERIALS (2016)

添加到收藏夹

Article Mechanics

Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites

M. Meng et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Moisture diffusion and hygrothermal aging of pultruded glass fiber reinforced polymer laminates in bridge application

Haohui Xin et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Composites

Investigation of Mechanical Properties of Unidirectional Steel Fiber/Polyester Composites: Experiments and Micromechanical Predictions

R. T. Durai Prabhakaran et al.

POLYMER COMPOSITES (2016)

添加到收藏夹

Article Polymer Science

Moisture uptake characteristics of a pultruded fibre reinforced polymer flat sheet subjected to hot/wet aging

S. A. Grammatikos et al.

POLYMER DEGRADATION AND STABILITY (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigation on Permeation Properties of Liquids into HTV Silicone Rubber Materials

Yanfeng Gao et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2014)

添加到收藏夹

Article Engineering, Manufacturing

Effect of prepreg storage humidity on the mixed-mode fracture toughness of a co-cured composite joint

J. Mohan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite

Daniel Scida et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Chemistry, Applied

Tensile Properties, Swelling, and Water Absorption Behavior of Rice-Husk-Powder-Filled Polypropylene/(Recycled Acrylonitrile-Butadiene Rubber) Composites

H. Ismail et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax-fibres and glass-fibres

M. Assarar et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Materials Science, Characterization & Testing

Advances in Strain Gauge Measurement on Composite Materials

A. Ajovalasit

STRAIN (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Hygrothermal effects on high V-F pultruded unidirectional carbon/epoxy composites: Moisture uptake

Vistasp M. Karbhari et al.

COMPOSITES PART B-ENGINEERING (2009)

添加到收藏夹

Review Engineering, Manufacturing

Residual stresses in thermoplastic composites- A study of the literature- Part II: Experimental techniques

Patricia P. Parlevliet et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Materials Science, Composites

Study of moisture absorption in natural fiber plastic composites

W Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Polymer Science

Experimental study and finite element simulation of heat build-up in rubber compounds with application to fracture

V Kerchman et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Manufacturing

Transient hygrothermal stresses in fiber reinforced composites: a heterogeneous characterization approach

P Vaddadi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)

添加到收藏夹

Article Polymer Science

Moisture absorption and hygrothermal aging in a bismaleimide resin

LR Bao et al.

POLYMER (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.