☆ 4.5 Article

Numerical Investigation of the Iron and Oxygen Transport in Arc Plasma During an Activated Tungsten Inert Gas Welding Process

PLASMA CHEMISTRY AND PLASMA PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Improving weld penetration by two-TIG arc activated via mixing oxygen into shielding gas

Jia Zhang et al.

Summary: To improve the welding efficiency of traditional TIG welding, a new activating TIG (A-TIG) welding process, called activating arc two-TIG (AT-TIG) welding, was developed by introducing a small amount of oxygen into the shielding gas. The effects of oxygen flow rate, welding current, and welding speed on the weld formation of SUS304 stainless steel were investigated. It was found that this method can achieve deeper weld penetration at higher welding speeds. The addition of oxygen to the shielding gas did not significantly affect the weld metal microstructure. The oxygen transfer process from the arc plasma to the weld pool and the mechanisms for enhancing weld penetration in this welding process were clarified.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Manufacturing

Spectroscopic analysis of the arc plasma during activating flux tungsten inert gas welding process

Chunkai Li et al.

Summary: This study investigates the spatial distribution of A-TIG welding arc spectra under the influence of three types of active agents. The distribution characteristics of active agent particles, argon, and iron particles in the arc were analyzed, and the arc electron temperature was calculated. Experimental results show that the distribution state of different active particles in the arc is different, and the influence of different active agents on the arc electron temperature varies.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Modelling and measurements of gas tungsten arc welding in argon-helium mixtures with metal vapour

Junting Xiang et al.

Summary: The study investigated the use of argon-helium mixtures in gas tungsten arc welding of an iron workpiece using a computational model. It was found that a transition from a helium-like to an argon-like arc occurs when the argon mole fraction exceeds about 0.3. Adding helium to argon altered arc properties and affected weld geometry, while iron vapor cooled the arc for all argon-helium mixtures. Emission spectroscopy measurements showed good agreement with the model's predictions.

WELDING IN THE WORLD (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical study of the metal vapour transport in tungsten inert-gas welding in argon for stainless steel

Junting Xiang et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Physics, Applied

Numerical study of the effects and transport mechanisms of iron vapour in tungsten inert-gas welding in argon

Junting Xiang et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigation of transport phenomena of arc plasma in argon-oxygen gas mixture

Xinxin Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Physics, Applied

Investigation of transient metal vapour transport processes in helium arc welding by imaging spectroscopy

Keigo Tanaka et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)

添加到收藏夹

Article Physics, Applied

Investigation of the bilayer region of metal vapor in a helium tungsten inert gas arc plasma on stainless steel by imaging spectroscopy

Keigo Tanaka et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)

添加到收藏夹

Article Thermodynamics

Investigation of heat transfer and fluid flow in high current GTA welding by a unified model

Xinxin Wang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study of mechanism, microstructure and mechanical properties of activated flux TIG welded P91 Steel-P22 steel dissimilar metal joint

Anup Kulkarni et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Engineering, Chemical

Numerical Simulation of Metal Vapour Behavior in Double Electrodes TIG Welding

X. Wang et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2018)

添加到收藏夹

Article Physics, Applied

A computational model of gas tungsten arc welding of stainless steel: the importance of considering the different metal vapours simultaneously

Hunkwan Park et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Revealing internal flow behaviour in arc welding and additive manufacturing of metals

Lee Aucott et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Physics, Applied

Mixing of multiple metal vapours into an arc plasma in gas tungsten arc welding of stainless steel

Hunkwan Park et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

添加到收藏夹

Article Thermodynamics

Investigation of heat transfer and fluid flow in activating TIG welding by numerical modeling

Xinxin Wang et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Physics, Applied

Plasma-weld pool interaction in tungsten inert-gas configuration

J. Mougenot et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of oxygen on transitional Marangoni flow in laser spot welding

C. X. Zhao et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Physics, Applied

Time-dependent calculations of molten pool formation and thermal plasma with metal vapour in gas tungsten arc welding

M. Tanaka et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

添加到收藏夹

Article Physics, Applied

The effects of metal vapour in arc welding

Anthony B. Murphy

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Measurement of surface temperature of weld pools by infrared two colour pyrometry

K. Yamazaki et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)

添加到收藏夹

Review Physics, Applied

Modelling of thermal plasmas for arc welding: the role of the shielding gas properties and of metal vapour

A. B. Murphy et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations

S. Mishra et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of an advanced A-TIG (AA-TIG) welding method by control of Marangoni convection

Hidetoshi Fujii et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metal vapour behaviour in thermal plasma of gas tungsten arcs during welding

K. Yamamoto et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

CO2-shielded arc as a high-intensity heat source

Manabu Tanaka et al.

VACUUM (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of oxide fluxes on activation mechanisms of tungsten inert gas process

S. Leconte et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Marangoni convection and weld shape variations in Ar-O2 and Ar-CO2 shielded GTA welding

SP Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sensitivity of Marangoni convection and weld shape variations to welding parameters in O2-Ar shielded GTA welding

SP Lu et al.

SCRIPTA MATERIALIA (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

A unified numerical Modeling of stationary tungsten-inert-gas welding process

M Tanaka et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

添加到收藏夹

Article Physics, Applied

Net emission coefficients for argon-iron thermal plasmas

J Menart et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling of the effects of surface-active elements on flow patterns and weld penetration

Y Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of activating flux on arc phenomena in gas tungsten arc welding

M Tanaka et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.