☆ 4.7 Article

Shock-induced melting and crystallization in titanium irradiated by ultrashort laser pulse

PHYSICS OF FLUIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Editorial Material Materials Science, Multidisciplinary

Atomistic simulation of martensite microstructural evolution during temperature driven β → α transition in pure titanium

C. Baruffi et al.

Summary: In this study, atomistic modeling and deformation gradient mapping were used to analyze the phase transition of pure titanium and its influence on the microstructure. Mechanical constraints were found to affect the number of martensite variants and the type and quantity of defects in the final microstructure. The study also provided insight into the structure and origin of different interfaces.

COMPUTATIONAL MATERIALS SCIENCE (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales

Aidan P. Thompson et al.

Summary: LAMMPS, a classical molecular dynamics simulator released as an open source code in 2004, has gained popularity for its wide variety of particle interaction models, platform compatibility, and user control over simulation details. With contributions from numerous developers, it has grown from 50,000 lines of code to a million today, showcasing new capabilities like dynamic load balancing and quantum-accuracy machine learning interatomic potentials.

COMPUTER PHYSICS COMMUNICATIONS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Homogeneous nucleation of dislocations in copper: Theory and approximate description based on molecular dynamics and artificial neural networks

Alexander E. Mayer et al.

Summary: This study investigates the nucleation of dislocations in copper single crystals under different pressure ranges. Artificial neural networks are trained to approximate material properties and improve the accuracy of the dislocation nucleation theory.

COMPUTATIONAL MATERIALS SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Assessment of the time-dependent behavior of dislocation multiplication under shock loading

Songlin Yao et al.

Summary: In this study, a method combining qualitative and quantitative analysis is proposed to establish a dislocation-based plasticity model and assess the time-dependent behavior of dislocation multiplication under shock loading. By applying dimensional analysis, ten potential governing equations for dislocation multiplication rate are derived, with only three equations found to predict the appropriate scaling coefficient of the plastic front. The newly derived stress-dependent governing equation is concluded to be more suitable for shock-loading process than commonly used equations by previous constitutive models.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Physics, Multidisciplinary

Melting of Titanium by a Shock Wave Generated by an Intense Femtosecond Laser Pulse

V. A. Khokhlov et al.

Summary: Laser shock peening with ultrashort laser pulses has been studied to increase the produced pressures and modify the surface layer. It has been shown that ultrashort laser pulses can generate significantly higher pressures than traditional nanosecond pulses, leading to changes in the melting depth and thickness of the melt layer caused by heat conduction. Additionally, the ultrafast crystallization of the melt forms a solid layer with a different structure.

JETP LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Martensitic transformation in temporally shaped femtosecond laser shock peening 304 steel

Yiling Lian et al.

Summary: Laser shock peening with temporally shaped femtosecond laser pulses was applied to strengthen 304 stainless steel, showing over 20% improvement in hardness. The mechanism was revealed through theoretical models and experimental techniques, providing insight into electron dynamics control for structural transformation and surface strengthening in various material systems.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Molecular dynamics simulation of the crystal structure evolution of titanium under different Tdamp values and heating/cooling rates

Juze Jiang et al.

Summary: Molecular dynamics simulations were used to investigate the evolution of titanium crystal structure under different temperature damping parameter values and heating/cooling rates. It was found that a higher Tdamp value led to a decrease in system temperature during heating, while a higher heating rate slightly increased the melting point. In the cooling process, a larger Tdamp value or a lower cooling rate promoted the crystallization of titanium, corresponding to a higher crystallization temperature.

CHEMICAL PHYSICS LETTERS (2021)

添加到收藏夹

Article Physics, Fluids & Plasmas

Observation of the solid and liquid separation after the shock propagation in a two-dimensional Yukawa solid

Pengwei Qiu et al.

Summary: The study reveals that in a two-dimensional Yukawa solid, the phase transition process in the postshock region is closely related to the compressional speed, and the coexistence of solid and liquid states can be observed when the speed is within a specific range.

PHYSICS OF PLASMAS (2021)

添加到收藏夹

Article Physics, Applied

Studying the Influence of Nanosecond Pulsed Laser Action on the Structure of Submicrocrystalline Titanium

Yu. R. Kolobov et al.

Summary: The microstructure of a thin subsurface layer of VT1-0 titanium alloy in submicrocrystalline state and after nanosecond pulsed laser irradiation was examined using scanning electron microscopy and transmission electron microscopy with an electron-probe microanalysis attachment.

TECHNICAL PHYSICS LETTERS (2021)

添加到收藏夹

Article Optics

Laser paintbrush as a tool for modern art

Vadim P. Veiko et al.

Summary: The study demonstrates that utilizing focused laser irradiation on metallic surfaces can achieve various artistic operations in thin oxide films, such as color making, multiple color changes, and erasing. These processes depend on heating the material above the evaporation point and the cooling rate.

OPTICA (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advances and Applications of Atomic-Resolution Scanning Transmission Electron Microscopy

Jingyue (Jimmy) Liu

Summary: Advances in atomic-resolution STEM imaging have been driven by innovative designs in electron optical systems, developments in detector technology, improvements in image acquisition and processing algorithms, and advancements in precision machining. These factors have not only made atomic-resolution STEM imaging more accessible in practical materials research, but also indicate a growing need for further hardware and software development to achieve three-dimensional atomic-resolution STEM imaging with single-atom chemical sensitivity. Additionally, the integration of artificial intelligence, machine learning, and big-data science is expected to significantly enhance the impact of STEM techniques on a wide range of research fields.

MICROSCOPY AND MICROANALYSIS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of the behavior of titanium under high-speed deformation

I. Nelasov et al.

Summary: This study utilized molecular dynamics simulation to investigate the alpha-omega phase transformation in titanium under high-energy impacts, revealing the dependence of the transition process on loading conditions. Results showed that the mechanism of alpha-omega transition varied under different temperature and pressure conditions. Additionally, the study confirmed the applicability of the employed interatomic potential for simulating the deformation of titanium.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Application of Neural Networks for Modeling Shock-Wave Processes in Aluminum

N. A. Gracheva et al.

Summary: A technique has been developed using artificial neural networks to describe the relationship between stresses, strains, and the onset of plastic flow in metal single crystals. The datasets for training are generated using molecular dynamics modeling, showing promising results in simulating shock wave propagation and studying dislocation nucleation.

MECHANICS OF SOLIDS (2021)

添加到收藏夹

Article Engineering, Manufacturing

The effects of the confining medium and protective layer during femtosecond laser shock peening

Yuxin Li et al.

Summary: Femtosecond laser shock peening can significantly increase surface hardness and maintain surface quality without the need for a confining medium and protective coating. However, the addition of a confining medium and protective layer can weaken the peening effect significantly.

MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Physics, Applied

Investigation of the Mechanism of Nanostructuring of Near-Surface Titanium Layers under the Influence of Nanosecond Laser Pulses

A. Yu Tokmacheva-Kolobova

Summary: The study showed that the microstructure of the near-surface layers of commercial titanium grade VT1-0 underwent significant refinement to a nanostructured state after laser treatment with nanosecond pulses under a layer of water. The nanostructuring of the near-surface layers may involve physical mechanisms associated with phase recrystallization or rotational dynamic recrystallization.

TECHNICAL PHYSICS LETTERS (2021)

添加到收藏夹

Article Optics

Single-shot femtosecond laser processing of Al-alloy surface: An interplay between Mbar shock waves, enhanced microhardness, residual stresses, and chemical modification

E. Ageev et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Parallel SPH modeling using dynamic domain decomposition and load balancing displacement of Voronoi subdomains

M. S. Egorova et al.

COMPUTER PHYSICS COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of an interatomic potential for titanium with high predictive accuracy of thermal properties up to melting point

A. Kartamyshev et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

添加到收藏夹

Article Physics, Applied

Thermomechanical Ablation of Titanium by Femtosecond Laser Irradiation

E. V. Struleva et al.

HIGH TEMPERATURE (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure evolution and electroplasticity in Ti64 subjected to electropulsing-assisted laser shock peening

Hao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Physics, Multidisciplinary

High-Energy-Density Physics and Laser Technologies

S. I. Anisimov et al.

JOURNAL OF EXPERIMENTAL AND THEORETICAL PHYSICS (2019)

添加到收藏夹

Article Physics, Applied

Dynamic Strength of Titanium Melt at Extremely High Extension Rates

E. V. Struleva et al.

HIGH TEMPERATURE (2019)

添加到收藏夹

Article Engineering, Industrial

Femtosecond Laser Peening of Friction Stir Welded 7075-T73 Aluminum Alloys

Terumasa Kawashima et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improvement of corrosion resistance of AA2024-T3 using femtosecond laser peening without protective and confining medium

Uros Trdan et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Regularities and Mechanisms of Formation of Submicro-, Nano-, and Ultrafine-Grained Structures and Mechanical Properties of Metals and Alloys Under Different Treatments

Yu. R. Kolobov

RUSSIAN PHYSICS JOURNAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Femtosecond laser peening of 2024 aluminum alloy without a sacrificial overlay under atmospheric conditions

Tomokazu Sano et al.

JOURNAL OF LASER APPLICATIONS (2017)

添加到收藏夹

Proceedings Paper Physics, Condensed Matter

MD simulation of steady shock-wave fronts with phase transition in single-crystal iron

V. V. Zhakhovsky et al.

SHOCK COMPRESSION OF CONDENSED MATTER - 2015 (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Robust structural identification via polyhedral template matching

Peter Mahler Larsen et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solitary Nanostructures Produced by Ultrashort Laser Pulse

Nail A. Inogamov et al.

NANOSCALE RESEARCH LETTERS (2016)

添加到收藏夹

Article Physics, Applied

Shock-wave-induced grain refinement and phase state modification in coarse-grained and nanocrystalline titanium

Yu. R. Kolobov et al.

TECHNICAL PHYSICS LETTERS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solitary Nanostructures Produced by Ultrashort Laser Pulse

Nail A. Inogamov et al.

NANOSCALE RESEARCH LETTERS (2016)

添加到收藏夹

Proceedings Paper Physics, Multidisciplinary

Equation of state for titanium at high energy densities

K. V. Khishchenko

XXXI INTERNATIONAL CONFERENCE ON EQUATIONS OF STATE FOR MATTER (ELBRUS 2016) (2016)

添加到收藏夹

Article Optics

Random-type scanning patterns in laser shock peening without absorbing coating in 2024-T351 Al alloy: A solution to reduce residual stress anisotropy

C. Correa et al.

OPTICS AND LASER TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-pressure melting curve of titanium

Vincent Stutzmann et al.

PHYSICAL REVIEW B (2015)

添加到收藏夹

Article Physics, Applied

Multiple-shocks induced nanocrystallization in iron

Tomoki Matsuda et al.

APPLIED PHYSICS LETTERS (2014)

添加到收藏夹

Article Chemistry, Physical

Plastic deformation mechanism of polycrystalline copper foil shocked with femtosecond laser

Y. X. Ye et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Physics, Applied

Gas-plasma flows under femtosecond laser ablation for metals in vacuum

E. Yu. Loktionov et al.

HIGH TEMPERATURE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock peening on the mechanical properties of a near-α titanium alloy

Weiju Jia et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Review Optics

Direct femtosecond laser surface nano/microstructuring and its applications

Anatoliy Y. Vorobyev et al.

LASER & PHOTONICS REVIEWS (2013)

添加到收藏夹

Article Physics, Applied

Formation of High-Density Dislocations and Hardening in Femtosecond-Laser-Shocked Silicon

Masashi Tsujino et al.

APPLIED PHYSICS EXPRESS (2012)

添加到收藏夹

Article Physics, Multidisciplinary

Formation of nanocavities in the surface layer of an aluminum target irradiated by a femtosecond laser pulse

S. I. Ashitkov et al.

JETP LETTERS (2012)

添加到收藏夹

Article Physics, Multidisciplinary

Evolution of Shock-Induced Orientation-Dependent Metastable States in Crystalline Aluminum

Mikalai M. Budzevich et al.

PHYSICAL REVIEW LETTERS (2012)

添加到收藏夹

Article Engineering, Mechanical

A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates

Ryan A. Austin et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Physics, Condensed Matter

Plastic deformation under high-rate loading: The multiscale approach

V. S. Krasnikov et al.

PHYSICS OF THE SOLID STATE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modified embedded-atom method interatomic potentials for the Ti-C and Ti-N binary systems

Young-Min Kim et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Engineering, Mechanical

Simulation of shock-induced fragmentation and vaporization in metals

M. E. Povarnitsyn et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Classical potential describes martensitic phase transformations between the α, β, and ω titanium phases

R. G. Hennig et al.

PHYSICAL REVIEW B (2008)

添加到收藏夹

Article Anatomy & Morphology

Evaluation of top, angle, and side cleaned FIB samples for TEM analysis

Eduardo Montoya et al.

MICROSCOPY RESEARCH AND TECHNIQUE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers

XW Zhou et al.

PHYSICAL REVIEW B (2004)

添加到收藏夹

Article Engineering, Electrical & Electronic

Terawatt femtosecond Cr : forstente laser system

MB Agranat et al.

QUANTUM ELECTRONICS (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Ideal pure shear strength of aluminum and copper

S Ogata et al.

SCIENCE (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Systematics of transition-metal melting

D Errandonea et al.

PHYSICAL REVIEW B (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.