4.7 Review

Characterization of cavitation zone in cavitating venturi flows: Challenges and road ahead

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Mechanics

Experimental study on the effect of throat length in the dynamics of internal unsteady cavitating flow

P. K. Ullas et al.

Summary: Cloud cavitation, a phenomenon with harmful effects in various applications, was experimentally studied in this work using venturi geometries. The influence of throat length on cavity shedding mechanisms was examined, and different diagnostic strategies were adopted to characterize the cavitation events. It was shown that the predominance of condensation shocks and re-entrant jets can be explained by the product of cavity thickness and average pressure gradient value.

PHYSICS OF FLUIDS (2023)

Article Mechanics

Experimental investigation of three-dimensional effects in cavitating flows with time-resolved stereo particle image velocimetry

Kunpeng Long et al.

Summary: The paper focuses on the three-dimensional effects in a cavitating flow in a venturi-type profile. Experimental measurements based on 2D3C stereoscopic particle image velocimetry are conducted to obtain the three components of the velocity field in multiple vertical planes. The study reveals the presence of significant flow velocities in the third direction, attributed to differences in boundary conditions and intrinsic three-dimensional mechanisms inside the cavitation area.

PHYSICS OF FLUIDS (2023)

Article Mechanics

A unified theory for bubble dynamics

A-Man Zhang et al.

Summary: In this study, we proposed a novel theory for the dynamics of oscillating bubbles. This theory takes into consideration various factors such as boundaries, bubble interaction, ambient flow field, gravity, bubble migration, fluid properties, and surface tension. We validated the theory with experimental data and compared it with classical theoretical models, demonstrating its advantages. Additionally, we applied the theory to model complex multi-cycle bubble interaction and gained new insights into inter-bubble energy transfer and pressure wave coupling.

PHYSICS OF FLUIDS (2023)

Article Mechanics

Experimental characterization of cavitation zone and cavity oscillation mechanism transitions in planar cavitating venturis

Anuja Vijayan et al.

Summary: This study presents the complete characterization of three planar cavitating venturis with different divergent angles and identifies three specific zones of the cavitation behavior. The study confirms that the dynamics of the cavitation zone is governed by different factors at different cavitation numbers and identifies key indicators of the dynamic behavior. The results also show that the span of the transition region decreases with an increase in the divergent angle.

PHYSICS OF FLUIDS (2023)

Review Mechanics

A classification and review of cavitation models with an emphasis on physical aspects of cavitation

Tobias Simonsen Folden et al.

Summary: This review article summarizes the main categories of models developed for modeling cavitation, a multiphase phenomenon in which a fluid locally experiences phase change due to a drop in ambient pressure. The most common approaches to modeling cavitation along with modifications due to other effects of cavitating flows are identified and categorized. The application of this categorization is demonstrated through an analysis of selected cavitation models. The review concludes with an outlook toward future improvements in the modeling of cavitation, based on the preceding discussion of the various cavitation models presented.

PHYSICS OF FLUIDS (2023)

Article Engineering, Multidisciplinary

Experimental study and numerical sizing model for cavitation zone characterisation in cavitating venturis

Anuja Vijayan et al.

Summary: The article discusses the features and applications of a passive flow control device called cavitating venturi. Experimental results show that the length of the cavitation zone in the venturi is dependent on the divergent angle and cavitation intensity. A numerical model is also proposed, which can accurately predict the cavitation length and operating pressure ratios, providing valuable guidance for engineering design.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2023)

Article Thermodynamics

Prediction of unsteady, internal turbulent cavitating flow using dynamic cavitation model

P. K. Ullas et al.

Summary: Based on the performance, computational time and resource requirements, this paper demonstrates that the combination of DES and DCM is the most suitable option for predicting turbulent-cavitating flows.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Article Mechanics

Analysis of the cavitation instabilities with time-resolved stereo and multiplane particle image velocimetry

Kunpeng Long et al.

Summary: This paper analyzes the various instabilities of cavitation attached to a two-dimensional profile. Experimental results reveal that the structure of the re-entrant jet, which is one of the primary mechanisms of cloud cavitation, is more complex than previously reported. The re-entrant jet is composed of successive vortices that expand vertically and convect downstream, contributing to the splitting and shedding of the cavity.

PHYSICS OF FLUIDS (2022)

Article Thermodynamics

Experiment on flow dynamics and cavitation structure in an axisymmetric venturi tube based on x-t diagrams and proper orthogonal decomposition

Shuangjie Xu et al.

Summary: This study experimentally investigated the shedding mechanisms and characteristics of sheet/cloud cavitation in an axisymmetric venturi tube under different flow conditions. The results showed that the combination of shock waves and re-entrant flow caused the shedding and collapse of cavitation. The relationships for predicting cavity lengths and shedding frequency were proposed. The proper orthogonal decomposition (POD) method was used to extract feature information and reduce complexity.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2022)

Article Mechanics

Nucleation effects on cloud cavitation about a hydrofoil

James A. Venning et al.

Summary: This study experimentally investigates the dynamics of cloud cavitation around a three-dimensional hydrofoil. The results show that the shedding modes of cavities vary with different nuclei populations. In the case of abundant nuclei, the shedding is large-scale, while in the case of sparsely seeded flow, coherent fluctuations are reduced to achieve optimal conditions.

JOURNAL OF FLUID MECHANICS (2022)

Article Mechanics

Thermodynamic effects at Venturi cavitation in different liquids

Zhigang Zuo et al.

Summary: The study investigates the influence of thermodynamic effects on cavitation flows and proposes three major dimensionless parameters for similitude conditions in Venturi cavitation experiments. The theory is validated through systematic experiments and provides improved measurements of cavitation characteristics. The results have significant implications for surrogates.

PHYSICS OF FLUIDS (2022)

Article Thermodynamics

Experimental investigation of three distinct mechanisms for the transition from sheet to cloud cavitation

Guangjian Zhang et al.

Summary: The conventional high-speed images combined with X-ray phase contrast images reveal the presence of three different mechanisms responsible for large cloud shedding: re-entrant jet mechanism, condensation shock wave mechanism, and collapse-induced pressure wave mechanism. These mechanisms play different roles under different cavitation conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Review Mechanics

Cavitation in cryogenic fluids: A critical research review

Aibo Wei et al.

Summary: This paper reviews recent progress in experimental measurements and modeling strategies for investigating cryogenic cavitation. It analyzes the thermodynamic properties of cryogenic fluids, introduces different scaling laws for thermal effects estimation, and discusses advancements in cavitation visualization, cavity dynamics, and multi-physical field measurements. The paper also presents commonly used cavitation and turbulence models in numerical simulation and examines modifications and improvements for modeling thermal effects in cryogenic cavitation. Additionally, it reviews critical issues in cryogenic fluid cavitation research, including thermal effects, unsteady shedding mechanisms, cavitation-vortex interactions, and cavitation-induced vibration/noise, and provides an outlook for further research in this field.

PHYSICS OF FLUIDS (2022)

Article Engineering, Environmental

Numerical investigation on the flow characteristics and choking mechanism of cavitation-induced choked flow in a Venturi reactor

Liang Fang et al.

Summary: This study investigated the flow characteristics and choking mechanism of cavitation-induced choked flow in a Venturi reactor through experimental research and numerical simulation. The research analyzed the characteristics of flow pulsation, energy loss, and the effects of pressure ratio and compressibility on choked flow. The study revealed that the choked flow under atmospheric pressure is caused by the pulsation of flow and the periodic evolution of cavity shape.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Mechanical

Flow measurement and instrumentation flow control characteristics of throttling venturi valve with adjustable area

Wonjae Yoon et al.

Summary: The study found that the flow control of the throttling venturi valve is influenced by the pintle stroke and upstream pressure, with the critical pressure ratio converging within a certain range. In flow control tests, the measured flow rate satisfactorily followed the target flow rate profile.

FLOW MEASUREMENT AND INSTRUMENTATION (2021)

Article Engineering, Environmental

Novel strategies to enhance hydrodynamic cavitation in a circular venturi using RANS numerical simulations

Nilanjan Dutta et al.

Summary: This study proposes three strategies to enhance the intensity of hydrodynamic cavitation and conducts extensive numerical simulations and experimental validation, showing that the impact of surface roughness on the trumpet diverging wall is more pronounced in improving cavitation intensity.

WATER RESEARCH (2021)

Article Mechanics

Compressible effects modeling for turbulent cavitating flow in a small venturi channel: An empirical turbulent eddy viscosity correction

Xin-Lei Zhang et al.

Summary: The RANS method coupling with cavitation model is a practical tool for predicting cavitating flows, but traditional RANS methods do not consider the compressibility effects induced by cavitation, requiring critical modeling of compressibility effects for predicting unsteady cavitating flows.

PHYSICS OF FLUIDS (2021)

Article Mechanics

Development of generalized bubble growth model for cavitation and flash boiling

Sachin Zanje et al.

Summary: Research indicates the need for improvement in existing cavitation models for bubble growth prediction, leading to the development of a coupled mass, momentum, and energy model. Parametric studies show that the growth rate of bubbles follows a linear trend on a log-log plot during initial stages, eventually settling into an asymptotic non-linear curve independent of Jakob number (J(a)). Integrating bubble growth rate expressions for radius prediction results in good agreement with experimental data, with a mean relative error of 1.2% and root mean square relative error of 8% over a wide range of J(a) values.

PHYSICS OF FLUIDS (2021)

Article Mechanics

Numerical investigation of three-dimensional partial cavitation in a Venturi geometry

Camille Gouin et al.

Summary: This paper numerically investigates the dynamics of partial cavitation developing in a 3D Venturi geometry and the interaction with sidewalls. The study pays particular attention to 3D effects by comparing numerical results obtained with sidewalls and periodic conditions. A three-dimensional dynamics of the sheet cavitation, unrelated to the presence of sidewalls, is identified and discussed.

PHYSICS OF FLUIDS (2021)

Article Mechanics

Unsteady cloud cavitation mechanisms of liquid nitrogen in convergent-divergent nozzle

Aibo Wei et al.

Summary: This study investigates the shedding mechanism of cloud cavitation in cryogenic liquids through experimental and numerical simulations. It reveals that the re-entrant jet and condensation shock are the dominant mechanisms for shedding of cloud cavitation, offering a deeper understanding of the phenomenon.

PHYSICS OF FLUIDS (2021)

Article Thermodynamics

Numerical investigation of the cavity shedding mechanism in a Venturi reactor

Liang Fang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Mechanics

Investigation of cavitation and vapor shedding mechanisms in a Venturi nozzle

Maxwell Brunhart et al.

PHYSICS OF FLUIDS (2020)

Article Physics, Fluids & Plasmas

Assessment of Cavitation Models for Compressible Flows Inside a Nozzle

Aishvarya Kumar et al.

FLUIDS (2020)

Article Engineering, Mechanical

Study of mechanical choked Venturi nozzles used for liquid flow controlling

Xingkai Zhang et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2019)

Article Engineering, Chemical

Single and multiphase CFD simulations for designing cavitating venturi

Gaurav G. Dastane et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Article Mechanics

Thermodynamic effects on Venturi cavitation characteristics

Haochen Zhang et al.

PHYSICS OF FLUIDS (2019)

Article Engineering, Chemical

Experimental and numerical study of cavitation flows in venturi tubes: From CFD to an empirical model

Hongbo Shi et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Article Mechanics

Void fraction measurements in partial cavitation regimes by X-ray computed tomography

Saad Jahangir et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2019)

Article Engineering, Mechanical

Study of a Cavitating Venturi Tube by Lumped Parameters

Samuel Cruz et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2019)

Article Engineering, Multidisciplinary

Development and validation of a homogeneous flow model for simulating cavitation in cryogenic fluids

Saeed Rahbarimanesh et al.

APPLIED MATHEMATICAL MODELLING (2018)

Article Thermodynamics

Quantitative analysis of the minor deviations in nozzle internal geometry effect on the cavitating flow

Jiwen Cui et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

Article Mechanics

Dynamics of partial cavitation in an axisymmetric converging-diverging nozzle

Saad Jahangir et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2018)

Article Mechanics

Numerical simulation and analysis of condensation shocks in cavitating flow

Bernd Budich et al.

JOURNAL OF FLUID MECHANICS (2018)

Article Engineering, Multidisciplinary

The Correction and Evaluation of Cavitation Model considering the Thermodynamic Effect

Wei Li et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2018)

Article Engineering, Mechanical

Cavitation erosion in liquid nitrogen

Matevz Dular et al.

Article Engineering, Multidisciplinary

Direct comparison of shadowgraphy and x-ray imaging for void fraction determination

Amitosh Dash et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2018)

Article Thermodynamics

An experimental study of sheet to cloud cavitation

Xiongjun Wu et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

Article Engineering, Mechanical

Fast X-ray imaging of cavitating flows

Ilyass Khlifa et al.

EXPERIMENTS IN FLUIDS (2017)

Article Engineering, Mechanical

Experimental and numerical investigation of the cavitation-induced choked flow in a herschel venturi-tube

S. Brinkhorst et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2017)

Article Thermodynamics

Numerical investigation of periodic cavitation shedding in a Venturi

Boris Charriere et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2017)

Article Thermodynamics

Unsteady pressure fluctuation characteristics in the process of breakup and shedding of sheet/cloud cavitation

Changchang Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Unsteady cavitation characteristics of liquid nitrogen flows through venturi tube

Zhu Jiakai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Experimental study of aerated cavitation in a horizontal venturi nozzle

P. Tomov et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

Article Thermodynamics

Experimental visualization and LES investigations on cloud cavitation shedding in a rectangular nozzle orifice

Zhixia He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Article Mechanics

Large Eddy Simulation of the transition from sheet to cloud cavitation over a wedge

Aswin Gnanaskandan et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2016)

Article Mechanics

Bubbly shock propagation as a mechanism for sheet-to-cloud transition of partial cavities

Harish Ganesh et al.

JOURNAL OF FLUID MECHANICS (2016)

Article Mechanics

Extension of the Schnerr-Sauer model for cryogenic cavitation

Zhu Jiakai et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2015)

Article Mechanics

A comparative study of cavitation models in a Venturi flow

Boris Charriere et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2015)

Article Mechanics

About the uncertainty quantification of turbulence and cavitation models in cavitating flows simulations

P. M. Congedo et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2015)

Article Engineering, Mechanical

Experimental and numerical investigation on the performance of small-sized cavitating venturis

Seyed Mehdi Ashrafizadeh et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2015)

Article Engineering, Mechanical

An investigation of a cavitating venturi flow control feature in a cryogenic propellant delivery system

Jose Luis Mena et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2015)

Article Engineering, Mechanical

Numerical investigation of cavitating Herschel Venturi-Tubes applied to liquid flow metering

S. Brinkhorst et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2015)

Article Engineering, Mechanical

Combined Numerical and Experimental Investigation of the Cavitation Erosion Process

Wang Jian et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2015)

Article Thermodynamics

Numerical Simulation of the Thermal Effect in the Cavitating Venturi Flow

Donggang Cao et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2015)

Article Engineering, Chemical

Microbial disinfection of seawater using hydrodynamic cavitation

Mandar P. Badve et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2015)

Article Biology

Cavitation in medicine

Christopher Earls Brennen

INTERFACE FOCUS (2015)

Proceedings Paper Physics, Applied

POD study of aerated cavitation in a venturi nozzle

P. Tomov et al.

9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015) (2015)

Proceedings Paper Physics, Applied

Numerical Optimization of converging diverging miniature cavitating nozzles

Kanchan Chavan et al.

9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015) (2015)

Article Mechanics

Robust analysis of cavitating flows in the Venturi tube

M. G. Rodio et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2014)

Article Thermodynamics

Performance and image analysis of a cavitating process in a small type venturi

A. M. Abdulaziz

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

Article Engineering, Mechanical

Application of variable area cavitating venturi as a dynamic flow controller

Hui Tian et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2014)

Article Thermodynamics

Modeling for non isothermal cavitation using 4-equation models

Eric Goncalves

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Mechanics

Modelling for isothermal cavitation with a four-equation model

Eric Goncalves et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)

Article Engineering, Multidisciplinary

NUMERICAL MODELLING OF CAVITATION: VALIDATION AND PARAMETRIC STUDIES

X. Margot et al.

ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS (2012)

Article Engineering, Mechanical

Scale effect on unsteady cloud cavitation

M. Dular et al.

EXPERIMENTS IN FLUIDS (2012)

Article Thermodynamics

Influence of convective heat transfer modeling on the estimation of thermal effects in cryogenic cavitating flows

M. G. Rodio et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Article Mathematics, Applied

Constraints on equation of state for cavitating flows with thermodynamic effects

Eric Goncalves et al.

APPLIED MATHEMATICS AND COMPUTATION (2011)

Article Engineering, Chemical

THE CFD DRIVEN OPTIMISATION OF A MODIFIED VENTURI FOR CAVITATIONAL ACTIVITY

Tausif A. Bashir et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)

Article Engineering, Mechanical

Application of small size cavitating venturi as flow controller and flow meter

Hojat Ghassemi et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2011)

Article Computer Science, Interdisciplinary Applications

Numerical study of cavitating flows with thermodynamic effect

Eric Goncalves et al.

COMPUTERS & FLUIDS (2010)

Article Mechanics

Instability of the cavitating flow in a venturi reactor

Hoseyn Sayyaadi

FLUID DYNAMICS RESEARCH (2010)

Article Mechanics

Unsteady simulation of cavitating flows in Venturi

Eric Goncalves et al.

JOURNAL OF HYDRODYNAMICS (2010)

Article Mechanics

Experimental characterization of aviation-fuel cavitation

Patrick F. Dunn et al.

PHYSICS OF FLUIDS (2010)

Article Engineering, Multidisciplinary

Numerical simulation of cavitation dynamics using a cavitation-induced-momentum-defect (CIMD) correction approach

Vedanth Srinivasan et al.

APPLIED MATHEMATICAL MODELLING (2009)

Review Biotechnology & Applied Microbiology

A review of applications of cavitation in biochemical engineering/biotechnology

Parag R. Gogate et al.

BIOCHEMICAL ENGINEERING JOURNAL (2009)

Article Computer Science, Interdisciplinary Applications

Numerical simulation of cavitating flows with homogeneous models

Eric Goncalves et al.

COMPUTERS & FLUIDS (2009)

Article Mechanics

Experiments and modeling of cavitating flows in venturi: attached sheet cavitation

S. Barre et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2009)

Article Chemistry, Physical

Modeling liquid hydrogen cavitating flow with the full cavitation model

X. B. Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Thermodynamics

Effects of cavitation in a nozzle on liquid jet atomization

Akira Sou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Mechanics

Simulation of cavitation bubbles in a convergent-divergent nozzle water jet

Z. Qin et al.

JOURNAL OF FLUID MECHANICS (2007)

Article Mechanics

MODELLING AND COMPUTATION OF UNSTEADY TURBULENT CAVITATION FLOWS

Chen Ying et al.

JOURNAL OF HYDRODYNAMICS (2006)

Article Mechanics

CAVITATION RESONANCE: THE PHENOMENON AND UNKNOWN

S. C. Li et al.

JOURNAL OF HYDRODYNAMICS (2006)

Article Engineering, Mechanical

Numerical and experimental study on the cavitating flow characteristics of pressurized liquid nitrogen in a horizontal rectangular nozzle

J Ishimoto et al.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2005)

Article Engineering, Mechanical

Steady-state cavitating nozzle flows with nucleation

CF Delale et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2005)

Article Computer Science, Interdisciplinary Applications

Interfacial dynamics-based modelling of turbulent cavitating flows, Part-1: Model development and steady-state computations

I Senocak et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2004)

Article Computer Science, Interdisciplinary Applications

Interfacial dynamics-based modelling of turbulent cavitating flows, Part-2: Time-dependent computations

I Senocak et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2004)

Article Thermodynamics

Filter-based unsteady RANS computations

ST Johansen et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2004)

Article Engineering, Mechanical

An experimental investigation of thermal effects in a cavitating inducer

JP Franc et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2004)

Article Thermodynamics

Thermodynamic modeling and simulation of cavitating nozzle flow

C Vortmann et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)

Article Engineering, Mechanical

X-ray measurements within unsteady cavitation

B Stutz et al.

EXPERIMENTS IN FLUIDS (2003)

Article Computer Science, Interdisciplinary Applications

Numerical simulation of the unsteady behaviour of cavitating flows

O Coutier-Delgosha et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2003)

Article Thermodynamics

Cryogenic Cavitating Flow in 2D Laval Nozzle

Naoki Tani et al.

JOURNAL OF THERMAL SCIENCE (2003)

Article Thermodynamics

High speed bubbly nozzle flow with heat, mass, and momentum interactions

D Albagli et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

Article Engineering, Mechanical

Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation

O Coutier-Delgosha et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2003)

Article Engineering, Mechanical

Numerical simulation of two-phase flow in injection nozzles: Interaction of cavitation and external jet formation

MX Yuan et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2003)

Article Engineering, Mechanical

Thermal damping in cavitating nozzle flows

CF Delale

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2002)

Article Engineering, Aerospace

Modeling cavitating venturi flows

CH Xu et al.

JOURNAL OF PROPULSION AND POWER (2002)

Article Engineering, Mechanical

Mathematical basis and validation of the full cavitation model

AK Singhal et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2002)

Article Thermodynamics

Observations of oscillating cavitation on a flat plate hydrofoil

K Sato et al.

JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING (2002)

Article Mechanics

A numerical investigation of unsteady bubbly cavitating nozzle flows

AT Preston et al.

PHYSICS OF FLUIDS (2002)

Article Engineering, Chemical

Modelling of bubble dynamics in a venturi flow with a potential flow method

MJ Gaston et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Article Mechanics

The cavitation instability induced by the development of a re-entrant jet

M Callenaere et al.

JOURNAL OF FLUID MECHANICS (2001)

Article Engineering, Mechanical

Simulations of cavitating flows using hybrid unstructured meshes

V Ahuja et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2001)

Article Engineering, Chemical

Numerical investigations in the behaviour of one-dimensional bubbly flow in hydrodynamic cavitation

VS Moholkar et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Article Mechanics

Quasi-one-dimensional steady-state cavitating nozzle flows

CF Delale et al.

JOURNAL OF FLUID MECHANICS (2001)

Article Engineering, Mechanical

Measurements within unsteady cavitation

B Stutz et al.

EXPERIMENTS IN FLUIDS (2000)

Article Computer Science, Interdisciplinary Applications

A preconditioned Navier-Stokes method for two-phase flows with application to cavitation prediction

RF Kunz et al.

COMPUTERS & FLUIDS (2000)