4.7 Article

Numerical study on similarity performance of geometric scaling of lean premixed swirl combustor

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Mechanics

The effect and mechanism of the flow deflector on ignition performance of the centrally staged combustor

Jinglong Ma et al.

Summary: A novel method using a flow deflector to improve ignition performance is proposed in this study. The effects of different lengths and pressure drops of the flow deflector on ignition performance and flame kernel propagation are investigated. The study shows that the flow deflector significantly improves ignition performance. The mechanism of the flow deflector is analyzed through numerical simulation and it is found that it improves both the local fuel/air ratio and droplet diameter, which benefits ignition performance.

PHYSICS OF FLUIDS (2023)

Article Mechanics

A mixing enhancement mechanism for a hydrogen transverse jet coupled with a shear layer for gas turbine combustion

Naijian Bai et al.

Summary: This study aims to explore a mixing enhancement mechanism by adding a rib in front of a hydrogen transverse jet. The results show that the penetration depth and mixing performance of the hydrogen jet are improved, leading to a significant improvement in the combustion performance. This study provides an important theoretical basis for the design of gaseous fuel combustors.

PHYSICS OF FLUIDS (2023)

Article Mechanics

Experimental investigations on central vortex core in swirl spray flames using high-speed laser diagnostics

Chi Zhang et al.

Summary: This study investigates the effect of central vortex core (CVC) on the flow and flame in a centrally staged swirl spray combustor. It is found that the CVC structure exists in an extended strip area of strong vorticity near the centerline of the combustor. The motion of CVC is mainly swing, followed by precessing.

PHYSICS OF FLUIDS (2023)

Article Thermodynamics

Numerical study on the influence of coolant temperature, pressure, and thermal barrier coating thickness on heat transfer in high-pressure blades

Duy-Tan Vo et al.

Summary: This study investigates the effects of thermal barrier coating thickness and coolant on the heat transfer in turbine blades. The results show that the leading tip, trailing tip, platform, and leading edge regions have higher thermal stresses. Coolants with higher temperature are less effective in cooling the blade, and the coolant temperature has a significant impact on the blade temperature.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Mechanics

Numerical modeling of distributed combustion without air dilution in a novel ultra-low emission turbulent swirl burner

Daniel Fuzesi et al.

Summary: Distributed combustion, associated with low-oxygen condition, has been achieved recently using a method called mixture temperature-controlled combustion. This numerical study aims to understand its operation and provide a robust framework for distributed combustion modeling. The study evaluates the combustion of liquid fuel and presents four operating conditions where distributed combustion was observed. The results show that a homogeneous fuel-air mixture is the main reason for excellent flame stability and ultra-low NOx emission. The potential applications include boilers, furnaces, and gas turbines.

PHYSICS OF FLUIDS (2022)

Article Mechanics

Flame folding and conditioned concentration profiles in moderately intense turbulence

Andrei N. Lipatnikov et al.

Summary: This study explores the influence of flame folding on the local flame structure in a turbulent flow. The results show that flame folding does not significantly affect the validity of the flamelet paradigm, as analyzed using a new diagnostic technique.

PHYSICS OF FLUIDS (2022)

Editorial Material Mechanics

Development and validation of models for turbulent reacting flows

Markus Klein et al.

PHYSICS OF FLUIDS (2022)

Article Mechanics

Investigation of flame structure and precessing vortex core instability of a gas turbine model combustor with different swirler configurations

Amir Mardani et al.

Summary: This study conducts numerical simulations on a dual-swirl gas turbine model combustor using a three-dimensional unsteady Reynolds-averaged Navier-Stokes approach. The objective is to analyze the ignition process and flame structure by studying the radicals involved, as well as investigate the flow field under different injector configurations. The results show good agreement with experimental data for velocity and temperature profiles. It is found that the build-up process of certain compounds and the balance between certain molecules play important roles in combustion initiation and flame formation.

PHYSICS OF FLUIDS (2022)

Article Engineering, Mechanical

Effects of scaling laws on flow and combustion characteristics of lean premixed swirl burners

Wenda Xie et al.

Summary: In this study, the effects of different scaling laws on heavy gas turbine combustors were investigated using a validated computational fluid dynamic model. The results showed that the DaI scaling law maintained good similarity under combustion state, while the Re scaling law brought significant changes on flow and flame characteristics.

JOURNAL OF THE GLOBAL POWER AND PROPULSION SOCIETY (2022)

Article Thermodynamics

Self-similarity for statistical properties in low-order representations of a large-scale turbulent round jet based on the proper orthogonal decomposition

R. Kapulla et al.

Summary: The study investigates the self-similar behavior of statistical quantities derived from a jet flow using both original data and low-order representations obtained from Proper Orthogonal Decomposition (POD). It is found that statistical properties obtained from low-order representations resemble the shape of the original jet and exhibit asymptotic states with increasing downstream distances. These findings suggest that self-similar behavior is mainly controlled by large-scale vortices, with the exception of axial velocity root-mean-square values.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)

Article Mechanics

Assessment of a flamelet approach to evaluating mean species mass fractions in moderately and highly turbulent premixed flames

A. N. Lipatnikov et al.

Summary: The study analyzes DNS data of turbulent flames to assess the predictive capabilities of the flamelet approach, showing good predictions for certain species but also limitations in quantitative predictions for others. Different definitions of combustion progress variable and PDF yield varying results, with implications for modeling discussed.

PHYSICS OF FLUIDS (2021)

Article Thermodynamics

Effects of scaling laws on the combustion and NOx characteristics of hydrogen burners

Christoph Meraner et al.

COMBUSTION AND FLAME (2020)

Article Mechanics

On the highly swirling flow through a confined bluff-body

A. V. Brito Lopes et al.

PHYSICS OF FLUIDS (2020)

Article Mechanics

Vortex breakdown of the swirling flow in a Lean Direct Injection burner

Yazhou Shen et al.

PHYSICS OF FLUIDS (2020)

Article Energy & Fuels

Scale-up methodology for automatic biomass furnaces

Gabriel Barroso et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Article Energy & Fuels

On scaling and mathematical modelling of large scale industrial flames

Roman Weber et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Article Thermodynamics

Heat release rate markers for premixed combustion

Zacharias M. Nikolaou et al.

COMBUSTION AND FLAME (2014)

Article Engineering, Mechanical

Asymptotic Effect of Initial and Upstream Conditions on Turbulence

William K. George

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2012)

Article Thermodynamics

Scaling and development of low-swirl burners for low-emission furnaces and boilers

RK Cheng et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2000)