4.7 Article

Assessment of icing effects on the wake shed behind a vertical axis wind turbine

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Civil

Systematic investigation of effect of rotor solidity on vertical-axis wind turbines: Power performance and aerodynamics analysis

Limin Kuang et al.

Summary: This study systematically investigates the effect of rotor solidity on the power performance and aerodynamics of vertical-axis wind turbines (VAWTs), and finds that a low to moderate rotor solidity allows for appreciable peak power performance. For a given relatively low rotor solidity, a two-bladed design is expected to achieve higher peak power, while a three-bladed design is more advantageous for relatively high rotor solidity. Additionally, VAWTs with smaller rotor diameters perform relatively better. The effects of the number of blades and rotor diameter are strongly affected by the variation of the chord-based Reynolds number.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2023)

Article Engineering, Civil

Assessment of URANS and LES methods in predicting wake shed behind a vertical axis wind turbine

Armin Sheidani et al.

Summary: In this paper, high-fidelity CFD simulations were used to examine the wake characteristics of an H-shaped vertical-axis wind turbine. Proper Orthogonal Decomposition (POD) was applied to analyze the computed flow field in the near wake of the rotor. The performance of different turbulence models was assessed, and the significant time and length scales of the predictions were highlighted using the extracted POD modes.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2023)

Article Mechanics

Effect of surface roughness and blade material on the performance of a stationary Savonius wind turbine under different operating conditions

Muhamad Hasfanizam Mat Yazik et al.

Summary: The Savonius wind turbine, a vertical-axis wind turbine invented in the 1930s, features a cylindrical drum and semi-circular blades. It is known for its simple design, low costs, and self-starting ability, making it suitable for rural areas. This study utilized a three-dimensional computer simulation to analyze the performance of a static Savonius turbine at different blade angle positions and considered the effects of surface roughness. The findings highlighted the importance of material selection in turbine blade development to minimize downtime and potentially save costs.

PHYSICS OF FLUIDS (2023)

Article Mechanics

Assessment of the aerodynamic benefits of collocating horizontal- and vertical-axis wind turbines in tandem using actuator line model

Yixiao Shao et al.

Summary: The actuator line model is used to study the wind turbine cluster composed of horizontal- and vertical-axis wind turbines in a vertically staggered layout. The results show that placing a vertical-axis wind turbine (VAWT) upwind of a horizontal-axis wind turbine (HAWT) can enhance the power generation of the HAWT by about 100 kW. Placing the VAWT downstream of the HAWT slightly reduces the power generation efficiency of the HAWT but increases the total power by about 60 kW. Placing the VAWT between the two HAWTs does not have a significant beneficial effect on the downstream HAWT, but the wind turbine cluster still generates 50 kW more power than without the VAWT. Overall, the collocation of VAWTs can effectively utilize otherwise wasted wind resources and increase the power generation density of wind farms.

PHYSICS OF FLUIDS (2023)

Article Thermodynamics

Wind-capture-accelerate device for performance improvement of vertical-axis wind turbines: External diffuser system

Limin Kuang et al.

Summary: The study investigates the use of an external diffuser system to enhance the power performance of vertical-axis wind turbines (VAWTs). Results demonstrate that an enclosed type basic diffuser can significantly improve the power performance of VAWT, but may increase aerodynamic loads on blades. Flanges and ejectors can further enhance the performance of the basic diffuser, showing potential applications in specific urban areas.

ENERGY (2022)

Article Mechanics

Interface topology and evolution of particle patterns on deformable drops in turbulence

Arash Hajisharifi et al.

Summary: This study investigates the capture and evolution of sub-Kolmogorov particles at the interface of deformable drops in turbulent flow. The results show that excluded-volume interactions play an important role in trapping the particles in highly convex regions of the interface.

JOURNAL OF FLUID MECHANICS (2022)

Article Engineering, Mechanical

Study on the effect of raindrops on the dynamic stall of a NACA-0012 airfoil

Armin Sheidani et al.

Summary: In this study, the pure effect of raindrops on dynamic stall of a pitching airfoil has been investigated. It was found that raindrops have negative effects on the lift coefficient of the pitching airfoil, and the presence of raindrops leads to the advancement of some aerodynamic phenomena.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

Article Thermodynamics

Characterization of wake interference between two tandem offshore floating vertical-axis wind turbines: Effect of platform pitch motion

Limin Kuang et al.

Summary: This study characterizes wake interference between two tandem offshore floating vertical-axis wind turbines (VAWTs) by using improved delayed detached eddy simulation (IDDES). The results show that locating the downstream turbine in the medium wake region of the upstream turbine can balance the power performance and space cost of the turbine array. Additionally, the pitch motion of the platforms can reduce the mean velocity deficit in the core wake region and increase the power coefficient of the downstream turbine.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Mechanics

Plasma actuator effects on the flow physics of dynamic stall for a vertical axis wind turbine

Majid Zare Chavoshi et al.

Summary: This study investigates the effects of plasma actuators on the dynamic stall control and performance improvement of a Darrieus turbine. The results show that inboard and double-sided plasma actuators can significantly enhance the turbine's power output.

PHYSICS OF FLUIDS (2022)

Article Mechanics

The role of wake splitter deflector on performance enhancement of Savonius wind turbine

Esmaeel Fatahian et al.

Summary: The Savonius drag-type wind turbine has poor efficiency due to adverse negative torques. This study aims to improve its performance by using a cylinder deflector with a wake splitter plate to manage the wake zone behind the deflector. Computational Fluid Dynamics simulation was conducted to investigate the effect of various parameters on the turbine's output. The results showed that the cylinder deflector with the wake splitter significantly increased the turbine's performance.

PHYSICS OF FLUIDS (2022)

Article Energy & Fuels

Effects of Damaged Rotor on Wake Dynamics of Vertical Axis Wind Turbines

Taimoor Asim et al.

Summary: This study investigates the relationship between damaged rotor and wake dynamics of a VAWT through detailed numerical analysis. It reveals that damaged rotor significantly affects the power generation capability of a VAWT, and the pressure-based flow mode contains most of the energy for accurate reconstruction of the wake. This research is expected to contribute to the development of novel machine learning algorithms for rotor damage detection in wind farms.

ENERGIES (2021)

Article Engineering, Civil

Evaluation of operational strategies on wind turbine power production during short icing events

Shannon Hildebrandt et al.

Summary: This study compared the impact of continuing operation versus pausing wind turbines during icing events in cold regions on overall power production. While pausing the turbines did result in less ice accumulation, the positive impact on power production was found to be insufficient to justify the shutdown strategy.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2021)

Article Energy & Fuels

Varying VAWT Cluster Configuration and the Effect on Individual Rotor and Overall Cluster Performance

Jeffrey E. Silva et al.

Summary: Using computational fluid dynamics software, the study found that the distance between turbines affects overall cluster performance, with variations in performance observed at different oblique angles in pyramid- and inverted pyramid-shaped vertical axis wind turbine configurations. The study also showed that turbines oriented in a line and perpendicular to the free-stream wind velocity exhibited the highest cluster performance improvement.

ENERGIES (2021)

Article Physics, Fluids & Plasmas

Particle capture by drops in turbulent flow

Arash Hajisharifi et al.

Summary: Particles in turbulent flow are transported to drop interfaces by jetlike motions and captured by interfacial forces. A simple transport model based on turbulent kinetic energy near the interface accurately predicts overall capture efficiency.

PHYSICAL REVIEW FLUIDS (2021)

Article Engineering, Ocean

Numerical evolution of unsteady wake characteristics of H-type Darrieus Hydrokinetic Turbine for a hydro farm arrangement

Sercan Yagmur et al.

Summary: In this study, CFD analysis was conducted on the wake region of an H-type Darrieus hydrokinetic turbine, showing that the SST k-? model can effectively predict power coefficients and flow characteristics. The 3D analysis results are in good agreement with the experimental data trends, although there are slight variations in the power coefficient results.

APPLIED OCEAN RESEARCH (2021)

Article Mechanics

Assessment of Reynolds-averaged Navier-Stokes method for modeling the startup regime of a Darrieus rotor

J. M. Ramirez et al.

Summary: The article examined the suitability of Reynolds-averaged Navier-Stokes (RANS) in predicting the dynamic response in the startup process of small-scale Darrieus vertical-axis wind turbines (VAWT) through numerical simulations. It was found that unreliable results may be obtained in certain regions of the rotor revolution. Additionally, resistive forces acting on the rotor were implemented to model a more realistic condition.

PHYSICS OF FLUIDS (2021)

Article Green & Sustainable Science & Technology

A field study of ice accretion and its effects on the power production of utility-scale wind turbines

Linyue Gao et al.

Summary: Study examined ice accretion on 50m-long turbine blades and icing-induced power production losses. Found more ice on outboard blades, up to 0.3m thick near blade tips. Theoretical predictions matched field measurements well. Turbines rotated slower and shut down frequently during icing event, with up to 80% power loss. Aimed to bridge gap between lab studies and real-world icing phenomena.

RENEWABLE ENERGY (2021)

Article Engineering, Civil

Numerical method to predict ice accretion shapes and performance penalties for rotating vertical axis wind turbines under icing conditions

Zhandos Baizhuma et al.

Summary: This paper proposes a numerical method to predict the ice accretion shapes and aerodynamic performance of rotating vertical axis wind turbine (VAWTs) under icing conditions. The combination of MRF and SMT efficiently reflects the unsteady icing effects on rotating wind turbines.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2021)

Article Green & Sustainable Science & Technology

Numerical simulations on static Vertical Axis Wind Turbine blade icing

Rustem Manatbayev et al.

Summary: The study focuses on the icing effects and ice accretion shapes on vertical axis wind turbines. Results show that ice shapes under different angles of attack significantly affect aerodynamic performance, especially in glaze ice conditions.

RENEWABLE ENERGY (2021)

Article Green & Sustainable Science & Technology

A hybrid, self-adapting drag-lift conversion wind energy harvesting system for railway turnout monitoring on the Tibetan Plateau

Hao Wang et al.

Summary: A hybrid wind energy harvesting system (WEHS) based on self-adapting drag-lift conversion is designed for powering high-speed railway turnout monitoring on the Tibetan Plateau. The system includes a hybrid vertical axis wind turbine (VAWT), power generation module, and energy storage module. Numerical simulation and experiments demonstrate the feasibility and practicality of the proposed WEHS in powering high-speed railway turnout monitoring.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

Review Thermodynamics

A review on the wake aerodynamics of H-rotor vertical axis wind turbines

H. Y. Peng et al.

Summary: Vertical axis wind turbines (VAWTs) have unique attributes such as exceptional performance in built environments and high packing density in wind farms. This study reviews recent research on the wake aerodynamics of H-rotor VAWTs, presenting mathematical expressions and a classic aerodynamic model for rotor analysis. The wakes of VAWTs are characterized by distinctive features like strong asymmetry and counter-rotating vortical motion, which have led to the development of various wake models for standalone VAWTs or multiple VAWT layouts. Researchers have used a wide range of methods, including wind tunnel testing, PIV tests, field tests, CFD simulations, and theoretical development, to investigate the wake flow fields and vortical structures of VAWTs.

ENERGY (2021)

Article Mechanics

Effect of aspect ratio on vertical-axis wind turbine wakes

Sina Shamsoddin et al.

JOURNAL OF FLUID MECHANICS (2020)

Article Engineering, Civil

Influence of Tip Speed Ratio on wake features of a Vertical Axis Wind Turbine

Antonio Posa

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Engineering, Mechanical

Numerical prediction of switching gurney flap effects on straight bladed VAWT power performance

Liu Chen et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Civil

Dependence of the wake recovery downstream of a Vertical Axis Wind Turbine on its dynamic solidity

Antonio Posa

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Engineering, Civil

Development of an icing simulation code for rotating wind turbines

Chankyu Son et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Engineering, Civil

A numerical study on choosing the best con fi guration of the blade for vertical axis wind turbines

Tiantian Zhang et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Mechanics

Mathematical Modeling of the Vortex Shedding Structure and Sound Pressure Level of a Large Wind Turbine Tower

Seyed Mahmood Mousavi et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2020)

Article Engineering, Civil

The effect of blade geometry on the structure of vertical axis wind turbine wakes

T. C. Hohman et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Engineering, Civil

Three-dimensional unsteady aerodynamics of a H-shaped vertical axis wind turbine over the full operating range

N. Franchina et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Thermodynamics

Winglet design for vertical axis wind turbines based on a design of experiment and CFD approach

Tian-tian Zhang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Green & Sustainable Science & Technology

2D-3D Computations of a Vertical Axis Wind Turbine Flow Field: Modeling Issues and Physical Interpretations

N. Franchina et al.

RENEWABLE ENERGY (2019)

Article Green & Sustainable Science & Technology

Experimental benchmark data for H-shaped and troposkien VAWT architectures

L. Battisti et al.

RENEWABLE ENERGY (2018)

Proceedings Paper Energy & Fuels

Industrial scale turbine and associated wake development - comparison of RANS based Actuator Line Vs Sliding Mesh Interface Vs Multiple Reference Frame method.

Mandar Tabib et al.

14TH DEEP SEA OFFSHORE WIND R&D CONFERENCE, EERA DEEPWIND'2017 (2017)

Review Engineering, Aerospace

Modal Analysis of Fluid Flows: An Overview

Kunihiko Taira et al.

AIAA JOURNAL (2017)

Article Mechanics

Cellular flow in a partially filled rotating drum: regular and chaotic advection

Francesco Romano et al.

JOURNAL OF FLUID MECHANICS (2017)

Article Engineering, Civil

CFD based synergistic analysis of wind turbines for roof mounted integration

P. Larin et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2016)

Article Engineering, Civil

Experimental and numerical investigation of a three-dimensional vertical-axis wind turbine with variable-pitch

M. Elkhoury et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2015)

Article Green & Sustainable Science & Technology

Quantification of the effects of geometric approximations on the performance of a vertical axis wind turbine

M. Salman Siddiqui et al.

RENEWABLE ENERGY (2015)

Article Thermodynamics

POD analysis of the unsteady behavior of a laminar separation bubble

Davide Lengani et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

Article Green & Sustainable Science & Technology

2.5D large eddy simulation of vertical axis wind turbine in consideration of high angle of attack flow

Chao Li et al.

RENEWABLE ENERGY (2013)

Article Materials Science, Multidisciplinary

Performance effects of attachment on blade on a straight-bladed vertical axis wind turbine

Yan Li et al.

CURRENT APPLIED PHYSICS (2010)

Article Engineering, Aerospace

Toward Real-Time Aero-Icing Simulation of Complete Aircraft via FENSAP-ICE

Kunio Nakakita et al.

JOURNAL OF AIRCRAFT (2010)

Article Engineering, Civil

A CFD approach for modeling the rime-ice accretion process on a horizontal-axis wind turbine

Ping Fu et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2010)

Article Engineering, Mechanical

Development of a second generation in-flight icing simulation code

H Beaugendre et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2006)

Article Engineering, Mechanical

Index of resolution quality for large eddy simulations

IB Celik et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2005)

Article Engineering, Aerospace

FENSAP-ICE's three-dimensional in-flight ice accretion module: ICE3D

H Beaugendre et al.

JOURNAL OF AIRCRAFT (2003)