☆ 4.6 Article

The role of a highly optimized approach with superior transparent conductive oxide anode towards efficient organic solar cell

PHYSICA SCRIPTA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

A numerical study on the relationship between the doping and performance in P3HT:PCBM organic bulk heterojunction solar cells

Hossein Movla et al.

Summary: In this study, the influence of p-type and n-type doping concentration on BHJ SCs was investigated using a drift-diffusion model. Doping the active layer was found to increase the cell characteristic parameters, in agreement with previous experimental results. Doping also caused space charge effects and redistribution of the internal electric field, resulting in a decreased performance of the device at higher doping levels. Optimum doping levels effectively improved charge transport and created an Ohmic contact between the organic and cathode interface, leading to a remarkable improvement in Jsc.

SCIENTIFIC REPORTS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Impact of phosphorescent dye on the performance and impedance spectroscopy for P3HT:PCBM solar cells

Amr Attia Abuelwafa et al.

Summary: In this research, the influence of platinum octaethylporphyrin (PtOEP) concentration on the photovoltaic and impedance spectroscopy of P3HT:PCBM solar cells was examined. By optimizing the concentration of PtOEP in the blend, the average power conversion efficiency of P3HT:PCBM solar cells was increased from 3.06 to 3.61% when adding milligrams of PtOEP to the blend. Impedance spectroscopy showed that the low concentration of PtOEP significantly increased the recombination process, while also increasing the diffusion coefficient (D) and charge-carrier mobility (mu). These findings suggest that incorporating low doses of PtOEP into P3HT:PCBM blends will be a practical method for achieving high efficiency in polymer solar cells.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Comparison of Charge Carrier Dynamics in Organic and Perovskite Solar Cells

Jiaying Wu et al.

Summary: The dynamics of charge carriers in organic solar cells and organic-inorganic hybrid metal halide perovskite solar cells were compared, discussing similarities and differences in charge generation, separation, transport, collection, and recombination, as well as their impact on device performance.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Zinc oxide nanodiffusers to enhance p3ht:pcbm organic solar cells performance

Olavo Cardozo et al.

Summary: This work proposes a new approach to improve the performance of organic solar cells by using Zinc Oxide (ZnO) nanodiffusers. The experimental evaluation and computational simulations both confirmed the effectiveness of ZnO nanoparticles in enhancing the efficiency of organic solar cells. The use of ZnO nanodiffusers with a diameter of 160 nm significantly reduced device reflectance and improved light absorption, leading to an increase in the photocurrent generation.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Integration of graphene with GZO as TCO layer and its impact on solar cell performance

Recep Zan et al.

Summary: The study investigated the impact of incorporating graphene with Ga-doped ZnO when used as a TCO layer on Si-based solar cells, finding the optimum GZO film thickness to be 350 nm. The hybrid TCO film integrating graphene and GZO showed higher sheet resistance due to graphene's properties but similar optical properties, leading to an increase in solar cell conversion efficiency from 10.0% to 11.2%.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Numerical investigation of the effects of copper sulfide nanoparticles on hole transport layer of thin-film organic solar cells

Michael A. Adedeji et al.

Summary: The incorporation of metal nanoparticles into organic solar cells has become a popular way to enhance device performance. Numerical simulations have been conducted to investigate the charge transport and recombination dynamics of copper sulfide nanoparticles-doped hole transport layer in the OSC. The results are in good agreement with experimental measurements, providing a better understanding of the physical processes in nanoparticles-doped OSCs.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigation of Carrier Transport Materials for Performance Assessment of Lead-Free Perovskite Solar Cells

Sagar Bhattarai et al.

Summary: This study focuses on the numerical modeling of lead-free methylammonium tin tri-iodide based perovskite solar cells. The selection of MASnI(3) as the perovskite material allows for a wider absorption spectrum and lower toxicity compared to higher bandgap MAPbI(3)-based PSCs. By using copper antimony sulfide and zinc oxide as carrier transport materials and optimizing the thickness of MASnI(3), the device achieved a higher power conversion efficiency.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2022)

添加到收藏夹

Article Chemistry, Physical

Hole transport properties of some spiro-based materials for quantum dot sensitized solar devices

Zahra Shariatinia

Summary: The hole transport characteristics of seven compounds were examined using density functional theory calculations. The samples containing the X = H substituent showed the highest performance in quantum dot sensitized solar cells.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Solution-processed metal-oxide based hole transport layers for organic and perovskite solar cell: A review

Vishwas D. Patel et al.

Summary: Metal oxides are important materials with interesting electronic properties, particularly transparent conducting oxides in the display and photovoltaic industries. While n-type metal oxides are common, p-type ones are rare. This review discusses the theoretical background of p-type oxides, reviews the current solution processed p-type oxides and their applications in solar cell devices, and identifies potential future p-type oxides with comparable properties to n-type ones.

MATERIALS TODAY COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Managing Challenges in Organic Photovoltaics: Properties and Roles of Donor/Acceptor Interfaces

Yanfeng Liu et al.

Summary: Organic photovoltaics (OPVs) have shown great potential for large-area, flexible, and lightweight applications. However, high energy loss due to charge recombination at the donor/acceptor interface remains a challenge. This review summarizes the recent advances in understanding the interfacial photophysics of nonfullerene acceptor-based OPVs and highlights the factors influencing interfacial energy loss. It also emphasizes the importance of controlling the donor/acceptor interface for improving the efficiency of OPVs.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Traps and transport resistance are the next frontiers for stable non-fullerene acceptor solar cells

Christopher Woepke et al.

Summary: The stability of organic solar cells is crucial for their commercialization. This study investigates the thermal degradation of inverted photovoltaic devices based on the PM6:Y6 non-fullerene system and identifies trap-induced transport resistance as the primary cause of the drop in fill factor. By suppressing trap formation, device lifetimes could be significantly increased, offering a promising future for organic solar cells.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Environmental

Modulating the nanoscale morphology on carboxylate-pyrazine containing terpolymer toward 17.8% efficiency organic solar cells with enhanced thermal stability

Jingnan Wu et al.

Summary: This study demonstrates a facile method to significantly improve the thin film morphology of active-layer materials in organic photovoltaic (OPV) cells, leading to enhanced photovoltaic performance and thermal stability. By fine-tuning the chemical structure of electron-deficient units in the wide bandgap donor polymer, the resulting terpolymers exhibited improved phase separation and favorable exciton dissociation, charge transport, and extraction. The achieved fill factor and power conversion efficiency were outstanding at 77.2% and 17.8%, respectively. The study highlights the importance of molecular structure variations in OPV materials and provides valuable insights for practical applications.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Energy & Fuels

Understanding the blade coated to roll-to-roll coated performance gap in organic photovoltaics

Rana Adel et al.

Summary: Efficient fabrication of organic photovoltaic (OPV) modules is crucial for their commercialization, but there is a significant performance gap between lab-scale and industrial methods. Therefore, understanding the critical steps in the upscaling process is essential to bridge this performance gap.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Optics

Optimization of ETM and HTM layer on NFA based BHJ-organic solar cell for high efficiency performance

Ayushi Katariya et al.

Summary: The simulation results show that an absorber thickness of 300 nm is optimal for a good organic solar cell, with the best ETL/HTL combination being SnO2 as the ETL layer and Cu2O as the HTL layer. Different combinations of ETL and HTL layers can achieve varying power conversion efficiencies for the proposed structures.

OPTIK (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polymer nanocomposites comprising PMMA matrix and ZnO, SnO2, and TiO2 nanofillers: A comparative study of structural, optical, and dielectric properties for multifunctional technological applications

R. J. Sengwa et al.

Summary: PNC films consisting of PMMA matrix and wide energy bandgap semiconductor nanocrystallite fillers were prepared by a sonicated suspension of nanoparticles in polymeric solutions followed by the casting method. The UV-Vis study revealed significant differences in absorbance and energy bandgap among the PNC films with various metal oxide nanofillers and concentrations. The films exhibited potential applications in UV-shielding, optical sensing, and bandgap tuning in advanced optoelectronic and organoelectronic devices.

OPTICAL MATERIALS (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review on performance analysis of P3HT:PCBM-based bulk heterojunction organic solar cells

Ishan C. Ghosekar et al.

Summary: Organic solar cells (OSCs) show strong potential in future solar cell technology due to their low production costs, small weight, printability, solution processing, and ability to use flexible substrates. Major specifications for commercializing OSCs include long device lifespan, enhanced environmental stability, and high power conversion efficiency. Developing low energy gap organic polymers, transport materials, and multi-layer system architecture can increase PCE, but challenges remain in achieving environmental stability and longevity.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Effect of Different Layers on the Performance of P3HT:PCBM-Based Organic Solar Cell

Subhajit Sen et al.

Summary: This study aims to find the maximum power conversion efficiency of P3HT:PCBM-based organic solar cells by varying the thickness of different layers. Results show that adjusting the thickness of different layers can improve the power conversion efficiency. Different ETL and HTL materials were also used to study the performance of the solar cells.

BRAZILIAN JOURNAL OF PHYSICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical simulation study for efficiency enhancement of doubly graded perovskite solar cell

Sagar Bhattarai et al.

Summary: This study optimized the perovskite solar cell performance through the use of double graded active layers and double carrier transport materials, achieving higher optoelectronic parameters and power conversion efficiency.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Simulation of organic solar cells's power conversion efficiency

Eduardo Henrique dos Santos Rosa et al.

Summary: This study simulates the power conversion efficiency of organic solar cells (OSCs) and optimizes the thickness of the active layer for better efficiency. By comparing the simulated efficiency results with real data, there is an average increase of 16% in efficiency.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Investigating the Indoor Performance of Planar Heterojunction Based Organic Photovoltaics

Sang Hyeon Kim et al.

Summary: Recent research has shown that by modulating the thickness of the ICBA layer to 65 nm, the performance of indoor OPVs based on PHJ has been optimized, achieving a power conversion efficiency comparable to that of BHJ OPVs.

IEEE JOURNAL OF PHOTOVOLTAICS (2021)

添加到收藏夹

Article Chemistry, Applied

Non -conjugated polymers as thickness -insensitive electron transport materials in high-performance inverted organic solar cells

Zhiqua Zhang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative study of conventional and inverted P3HT: PCBM organic solar cell

M. Abdallaoui et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Benefits, Problems, and Solutions of Silver Nanowire Transparent Conductive Electrodes in Indium Tin Oxide (ITO)-Free Flexible Solar Cells

Mohammad-Reza Azani et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Physics, Applied

Analytical description of mixed ohmic and space-charge-limited conduction in single-carrier devices

Jason A. Rohr et al.

JOURNAL OF APPLIED PHYSICS (2020)

添加到收藏夹

Article Energy & Fuels

Composite materials of P3HT:PCBM with pyrene substituted zinc(II) phthalocyanines: Characterisation and application in organic solar cells

Burak Kadem et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Extraction of the Built-in Potential for Organic Solar Cells From Current-Voltage Characteristics

Prashanth Kumar Manda et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Polymer solar cells: P3HT: PCBM and beyond

P. R. Berger et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2018)

添加到收藏夹

Article Optics

Analytical modelling of organic solar cells with scattering interface

Asish Hazra et al.

OPTIK (2018)

添加到收藏夹

Review Engineering, Electrical & Electronic

Alternative transparent conducting electrode materials for flexible optoelectronic devices

S. Sharma et al.

OPTO-ELECTRONICS REVIEW (2018)

添加到收藏夹

Article Optics

Numerical modelisation of ZnO interfacial layer on P3HT:PCBM based organic photovoltaic bulk heterojunction devices

Chahrazed Bendenia et al.

OPTIK (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced photocatalytic activity and ultra-sensitive benzaldehyde sensing performance of a SnO2 center dot ZnO center dot TiO2 nanomaterial

Md Abdus Subhan et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

Wenchao Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bulk-Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization

Hongkyu Kang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Optics

Effect of trapping and temperature on the performance of P3HT: PCBM organic solar cells

Ibrahim Taibi et al.

OPTIK (2016)

添加到收藏夹

Article Energy & Fuels

Optical absorption study of P3HT:PCBM blend photo-oxidation for bulk heterojunction solar cells

Jarmila Mullerova et al.

SOLAR ENERGY (2016)

添加到收藏夹

Review Polymer Science

Charge Carrier Transport and Photogeneration in P3HT:PCBM Photovoltaic Blends

Frederic Laquai et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of preparation parameters on performance of P3HT: PCBM solar cells

Shilin Chen et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Competition between recombination and extraction of free charges determines the fill factor of organic solar cells

Davide Bartesaghi et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Physical

Improved Power Conversion Efficiency of P3HT:PCBM Organic Solar Cells by Strong Spin-Orbit Coupling-Induced Delayed Fluorescence

Daniel Mosegui Gonzalez et al.

Advanced Energy Materials (2015)

添加到收藏夹

Article Energy & Fuels

Enhancing Efficiency of Organic Bulkheterojunction Solar Cells by Using 1,8-Diiodooctane as Processing Additive

Francesco Arca et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2014)

添加到收藏夹

Review Polymer Science

Efficiency of bulk-heterojunction organic solar cells

M. C. Scharber et al.

PROGRESS IN POLYMER SCIENCE (2013)

添加到收藏夹

Review Polymer Science

Charge carrier recombination in organic solar cells

Christopher M. Proctor et al.

PROGRESS IN POLYMER SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving efficiencies by modulating the central metal ion in porphyrin-oligothiophene-mediated P3HT/PCBM organic solar cells

Dani M. Lyons et al.

SYNTHETIC METALS (2013)

添加到收藏夹

Article Energy & Fuels

Oxygen doping-induced photogeneration loss in P3HT:PCBM solar cells

Antonio Guerrero et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)

添加到收藏夹

Article Chemistry, Physical

Extracting Microscopic Device Parameters from Transient Photocurrent Measurements of P3HT:PCBM Solar Cells

Roderick C. I. MacKenzie et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Chemistry, Physical

Performance Enhancement of the P3HT/PCBM Solar Cells through NIR Sensitization Using a Small-Bandgap Polymer

Tayebeh Ameri et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Chemistry, Physical

Modeling Nongeminate Recombination in P3HT:PCBM Solar Cells

Roderick C. I. MacKenzie et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

添加到收藏夹

Article Energy & Fuels

Longterm stability of efficient inverted P3HT:PCBM solar cells

B. Zimmermann et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polymer-based solar cells

Alex C. Mayer et al.

MATERIALS TODAY (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.