☆ 4.5 Article

Hydroxyapatite composites with carbon allotropes: Preparation, properties, and applications

PARTICUOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

PERFORMANCE OF THERMALLY SPRAYED HYDROXYAPATITE COATINGS FOR BIOMEDICAL IMPLANTS: A COMPREHENSIVE REVIEW

Gaurav Prashar et al.

Summary: Metallic bioimplants are widely used to replace parts of the human body in a physiologically accepted manner. A bio-compatible coating is applied to the surface of the implant through surface modification techniques to improve its compatibility. Hydroxyapatite (HAp)-based coatings are preferred, but they have poor adhesion strength and mechanical properties. Reinforcing the coating with hard particulates can enhance its performance.

SURFACE REVIEW AND LETTERS (2023)

添加到收藏夹

Review Biochemistry & Molecular Biology

Four-Dimensional Printing and Shape Memory Materials in Bone Tissue Engineering

Xinwei Zhang et al.

Summary: The repair of severe bone defects is a challenge, and three-dimensional (3D) bioprinting has received attention in bone tissue engineering. However, 3D printing is limited as it only considers the static scaffold. The emergence of four-dimensional (4D) printing, which combines time with 3D printing, allows for dynamic changes in response to environmental stimuli. 4D printing has potential in bone tissue repair.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Electroactive Hydroxyapatite/Carbon Nanofiber Scaffolds for Osteogenic Differentiation of Human Adipose-Derived Stem Cells

Baojun Sun et al.

Summary: Traditional bone defect treatments face limitations due to insufficient supply of autologous bone, immune rejection of allogeneic bone grafts, and high medical costs. To overcome these limitations, bone tissue engineering with electroactive scaffolds has emerged as a promising option. However, current electroactive scaffolds are either single-function and not suitable for scientific research and clinical application, or complex and expensive to prepare. This study proposes a new tissue engineering strategy to optimize the electrical properties and biocompatibility of carbon-based materials.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Facet of 4D printing in biomedicine

Vidhi Mathur et al.

Summary: 4D printing is an upgraded version of 3D printing that utilizes smart materials and external stimuli to change the shape and size of printed structures over time. This review discusses the basic techniques of 4D printing, the shape memory effect, and various stimuli that cause shape change, as well as its potential applications in biomedicine and regenerative medicine.

JOURNAL OF MATERIALS RESEARCH (2023)

添加到收藏夹

Article Electrochemistry

High-Content Hydroxyapatite Carbon Composites for the Electrochemical Detection of Heavy Metal Cations in Water

Mirko Magni et al.

Summary: The study combines the excellent adsorption capacity of nanostructured hydroxyapatite (Hap) in heavy metal cations with the good electrical conductivity of high-surface carbon materials to fabricate high-content hydroxyapatite electrodes (Hap 84-96 wt.%). The electrodes demonstrate the synergistic capability of detection and adsorption of heavy metal cations in water solutions. A mesoporous carbon derived from bio-waste is used as a scaffold for depositing Hap by co-precipitation. The composite with 92 wt.% Hap shows superior sensitivity compared to low-content Hap electrodes reported in literature.

CHEMELECTROCHEM (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Cytotoxicity of Carbon Nanotubes and Hydroxyapatite, and Graphene and Hydroxyapatite Nanocomposites against Breast Cancer Cells

Tristan Nguyen et al.

Summary: Cancer is a dreadful disease and the leading cause of death. Breast cancer is the most common invasive cancer in women. In this study, biocompatible nanomaterials CNTs-HAP and GR-HAP were designed to target breast cancer cells and showed significant cytotoxicity and inhibitory effects on cell growth and motility.

NANOMATERIALS (2023)

添加到收藏夹

Article Materials Science, Ceramics

Micromechanical properties of hydroxyapatite nanocomposites reinforced with CNTs and ZrO2

Farayi Musharavati et al.

Summary: This study investigated the mechanical properties, wettability, and tribology of hydroxyapatite-zirconia-carbon nanotube ceramic nanocomposites with different carbon nanotube ratios (1%, 5%, 10%). The results showed that the hardness of the materials increased with the addition of 1% and 5% carbon nanotubes, but decreased with the addition of 10% carbon nanotubes. In addition, the nanocomposite with 10% carbon nanotubes exhibited the highest hydrophilicity.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Review Biochemistry & Molecular Biology

The Impact of Hydroxyapatite Sintering Temperature on Its Microstructural, Mechanical, and Biological Properties

Marta Trzaskowska et al.

Summary: Hydroxyapatite, the main mineral of bone tissue, can be fabricated as an artificial calcium phosphate ceramic for bone defect treatment. The production method, especially the sintering temperature, directly affects the basic properties and biomedical potential of synthetic hydroxyapatite. This article focuses on describing and summarizing the key features of hydroxyapatite depending on the applied sintering temperature, including microstructural features, mechanical properties, degradation/absorbability, bioactivity, and biocompatibility.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Sericin/Nano-Hydroxyapatite Hydrogels Based on Graphene Oxide for Effective Bone Regeneration via Immunomodulation and Osteoinduction

Mei Fu et al.

International Journal of Nanomedicine (2023)

添加到收藏夹

Article Polymer Science

4D Printing of Electroactive Triple-Shape Composites

Muhammad Yasar Razzaq et al.

Summary: This research presents the 4D printing of electro-active triple-shape composites based on thermoplastic blends. The composites were suitable for 3D printing by fused filament fabrication (FFF) and the resulting parts demonstrated the triple-shape effect. By increasing voltages in a stepwise fashion, the printed demonstrators realized the triple-shape effect through a thermo-mechanical programming procedure. The 3D printing of such electroactive composites opens up possibilities for complex shapes with defined geometries and novel methods for triggering shape memory, which could have potential applications in space, robotics, and actuation technologies.

POLYMERS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biomimetic Growth of Hydroxyapatite in Hybrid Polycaprolactone/Graphene Oxide Ultra-Porous Scaffolds

S. Fuster-Gomez et al.

Summary: This paper presents the preparation and characterization of hybrid scaffolds made of polycaprolactone (PCL) and different graphene oxide (GO) amounts. The scaffolds showed bimodal porosity and were highly interconnected. The addition of GO influenced the growth kinetics of a hydroxyapatite (HAp) layer and improved the bioactivity of the scaffolds.

ACS OMEGA (2023)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis of hydroxyapatite by hydrothermal and microwave irradiation methods from biogenic calcium source varying pH and synthesis time

Mario Andrean Macedo Castro et al.

Summary: This study investigated the synthesis of hydroxyapatite and compared the Hydrothermal (HT) and Microwave Irradiation (MW) methods. It was found that the Hydrothermal method was more suitable for producing hydroxyapatite as a biomaterial.

BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2022)

添加到收藏夹

Article Chemistry, Analytical

Carbon dots-decorated hydroxyapatite nanowires-lanthanide metal-organic framework composites as fluorescent sensors for the detection of dopamine

Mengyao Sun et al.

Summary: In this study, carbon dots-decorated hydroxyapatite nanowires-lanthanide metal-organic framework composites were synthesized and used as ratiometric fluorescent probes for dopamine detection. The resulting probes showed excellent detection performance and potential applications.

ANALYST (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A photoluminescence study of nitrogen-doped carbon quantum dots/hydroxyapatite (NCQDs/HAp) nanocomposites

Md Irfan et al.

Summary: This study successfully functionalized nitrogen-doped carbon quantum dots with hydroxyapatite and investigated the photoluminescence of the composites under ultraviolet radiation, resulting in nanoscale crystalline NCQDs/HAp composites with enhanced photoluminescence compared to pure HAp.

MATERIALS TECHNOLOGY (2022)

添加到收藏夹

Review Engineering, Mechanical

Hydroxyapatite composite scaffold for bone regeneration via rapid prototyping technique: a review

Fangfang Sun et al.

Summary: This review paper provides a comprehensive study of various types of HAp composite scaffold fabricated with RP technologies, introducing their potential applications in bone tissue engineering and discussing future research directions.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mixed-Metal MOF-Derived Carbon Sponges for Oil Absorption

Cesar M. Oliva Gonzalez et al.

Summary: In this work, three carbon sponges coated with different metal-organic frameworks (MOFs) were successfully prepared by carbonization, showing hydrophobic and magnetic properties. Among them, the carbon sponge coated with BTC-Co exhibited the highest absorption capacity. These sponges are a promising alternative to traditional materials due to their simple production method, low-cost starting materials, and excellent absorption capacity for oil.

RECENT PATENTS ON NANOTECHNOLOGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Synthesis of a graphene oxide/agarose/hydroxyapatite biomaterial with the evaluation of antibacterial activity and initial cell attachment

Ingrid Patricia Khosalim et al.

Summary: In this study, a novel biomaterial composed of graphene oxide, agarose, and hydroxyapatite was synthesized using an electrophoresis system. The synthesized biomaterial exhibited needle-like crystals with high purity and a calcium-phosphate ratio similar to thermodynamically stable hydroxyapatite. The addition of 1.0wt% graphene oxide in the biomaterial resulted in significantly less Staphylococcus aureus, and initial attachment of MC3T3-E1 cells confirmed the safety of the synthesized biomaterial for cell viability. Overall, this study demonstrates the promising potential of the synthesized biomaterial for bone tissue engineering.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Review Engineering, Biomedical

Carbon-Based Materials for Articular Tissue Engineering: From Innovative Scaffolding Materials toward Engineered Living Carbon

Monsur Islam et al.

Summary: Carbon materials have great potential in the healthcare field, especially in tissue repair and regeneration. Challenges remain in designing carbon-based cell niches and scaffolds. By studying the role of carbon materials in regenerative medicine and related manufacturing strategies, further applications of carbon materials can be promoted. Understanding fundamental breakthroughs and future research trends is also necessary.

ADVANCED HEALTHCARE MATERIALS (2022)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Emerging zero-dimensional to four-dimensional biomaterials for bone regeneration

Haoyu Fang et al.

Summary: Bones are highly sophisticated tissues with remarkable potential for regeneration. Novel biomaterials designed to mimic bone microenvironment have significantly accelerated bone healing. These biomaterials are categorized as zero-dimensional to four-dimensional based on their dimensional structure and functional mechanism.

JOURNAL OF NANOBIOTECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Biomaterials

Potential Load-Bearing Bone Substitution Material: Carbon-Fiber-Reinforced Magnesium-Doped Hydroxyapatite Composites with Excellent Mechanical Performance and Tailored Biological Properties

Xueni Zhao et al.

Summary: A potential load-bearing bone substitution and repair material, CF/Mg-HAs composites, were constructed with excellent mechanical performance and tailored biological properties. The doping of Mg induced distortions and dislocations in the hydroxyapatite lattice, resulting in decreased crystallinity and enhanced dissolution. The fracture toughness of CF/1Mg-HAs increased by approximately 38%. CF/Mg-HAs showed good bioactivity, biocompatibility, and osteogenic induction properties.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of graphene oxide/hydroxyapatite nanocomposite on osteogenic differentiation and antimicrobial activity

Chingis Daulbayev et al.

Summary: This paper presents the fabrication and characterization of electrospun graphene oxide/calcium hydroxyapatite/polycaprolactone composite, which shows excellent biocompatibility, mechanical properties, electrical and thermal conductivity. It can enhance osteogenic differentiation of osteoblasts and exhibits antimicrobial effect, making it a promising candidate for bone tissue regeneration in medical and dental applications.

SURFACES AND INTERFACES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Reinforcement of hydroxyapatite ceramics by soaking green samples of tetracalcium phosphate/monetite mixture in aqueous solutions

Lubomir Medvecky et al.

Summary: Porous hydroxyapatite ceramics with enhanced mechanical strength were prepared by soaking in fluids and sintering the compressed precursor. The compressive strength was influenced by porosity, chemical and phase purity, as well as the arrangement of the HAP lattice in the ceramics.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Comparison of Physicochemical, Mechanical, and (Micro-)Biological Properties of Sintered Scaffolds Based on Natural- and Synthetic Hydroxyapatite Supplemented with Selected Dopants

Andrzej Hudecki et al.

Summary: This study developed a new composite biomaterial based on hydroxyapatite with different dopants, which showed good mechanical properties and bacteriostatic effects against Gram-positive bacteria.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Synthesis, Characterization, Functionalization and Bio-Applications of Hydroxyapatite Nanomaterials: An Overview

Muhammad Usman Munir et al.

Summary: Hydroxyapatite nanomaterials (HA-NMs) have composition and structure similar to natural bone, making them ideal for biomedical applications. Extensive research has explored various synthesis and characterization methods, as well as the role of HA-NMs in drug delivery, bioimaging, cell separation, and hyperthermia treatment. This review provides an overview of HA-NMs, including their chemical composition, synthesis methods, surface modification, and future directions in biomedical applications.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2022)

添加到收藏夹

Article Polymer Science

Flexural Properties of Polyetheretherketone Composites Containing Hydroxyapatite, Graphene Oxide, and Carbon Fiber for Spinal Implant Materials

Sangwoon Lee et al.

Summary: This study aims to develop a PEEK composite with improved bioactivity and flexural properties by incorporating hydroxyapatite (HA), graphene oxide (GO), and carbon fiber (CF) as fillers.

MACROMOLECULAR RESEARCH (2022)

添加到收藏夹

Article Polymer Science

Mechanical Properties of Polyetheretherketone Composites with Surface-Modified Hydroxyapatite Nanofibers and Carbon Fibers

Sangwoon Lee et al.

Summary: This study aimed to develop a PEEK composite with hydroxyapatite (HA) and carbon fiber (CF) whose mechanical properties are comparable to human cortical bone. The mechanical properties of the composite were improved by incorporating modified HA nanofibers (m-HANF) and modified CF (m-CF), which showed enhanced dispersion and interfacial adhesion with the PEEK matrix. This unique PEEK/m-HANF/m-CF composite can be used to develop high-performance PEEK biocomposites.

MACROMOLECULAR RESEARCH (2022)

添加到收藏夹

Article Materials Science, Ceramics

Boosting biotribological and biological properties of carbon fiber composites by grafting SiC nanowires and hydroxyapatite for hip joint application

Fei Zhao et al.

Summary: Carbon fiber-SiCnws-hydroxyapatite-carbon composites (CHS) exhibit excellent biotribological and biological properties for potential application in hip joints. The introduction of SiCnanowires improves the biotribological performance of CHS, and CHS promotes cell proliferation and differentiation. This composite material has the potential to be used as an alternative in hip joints.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Dissolution Performance of Carbon/Hydroxyapatite Nanocomposite Prepared from Fish Scales

Umaporn Sittitut et al.

Summary: The utilization of waste as raw materials in the production of functional materials is an area of growing interest. This study investigated the microstructure, chemical properties, and phosphorus dissolution efficiency of carbon/hydroxyapatite (HAP) nanocomposites derived from fish scale wastes. The results showed that the pyrolysis temperature had an influence on the material characteristics and dissolution efficiency.

INORGANICS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

3D Bioprinted Hydroxyapatite or Graphene Oxide Containing Nanocellulose-Based Scaffolds for Bone Regeneration

Markel Lafuente-Merchan et al.

Summary: Bone tissue damage is a common problem associated with various diseases and trauma. The current treatments have limitations, making tissue engineering through 3D bioprinting a promising option for bone regenerative medicine. In this study, the addition of hydroxyapatite (HAP) and graphene oxide (GO) to nanocellulose-alginate (NC-Alg) bioink improves its viscosity and enhances scaffold mechanics, cell viability, and functionality. However, GO is incompatible with the ink after autoclave sterilization. Overall, the results highlight the importance of using inorganic components in bioink for bone tissue engineering.

MACROMOLECULAR BIOSCIENCE (2022)

添加到收藏夹

Article Oncology

Progress on carbon dots and hydroxyapatite based biocompatible luminescent nanomaterials for cancer theranostics

Prakhar Sengar et al.

Summary: This article discusses the development of multifunctional agents for cancer treatment based on carbon dots (CDs) and nanohydroxyapatite (nHA). Different synthesis strategies can produce materials with different morphologies and tunable photoluminescence (PL) spectra. These materials are biocompatible and can be used for both therapy and diagnosis of cancer.

TRANSLATIONAL ONCOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasma-Sprayed Hydroxyapatite Coatings and Their Biological Properties

Szymon Kowalski et al.

Summary: Through the research, it was found that the distance of air plasma spraying had a negligible impact on the biocompatibility of hydroxyapatite coatings. Coatings sprayed at a distance of 120 mm showed a slight increase in biological properties tested. Additionally, hydroxyapatite coatings sprayed at different distances were not cytotoxic and did not activate NF-kB.

COATINGS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

The synthesis of amino-functionalized carbon quantum dots-decorated hydroxyapatite as drug delivery agent

Khee Chung Hui et al.

Summary: The combination of amino-functionalized carbon quantum dots with hydroxyapatite enhances the optical and surface area properties, making it a promising material for controlled drug release.

COMPTES RENDUS CHIMIE (2022)

添加到收藏夹

Review Materials Science, Biomaterials

Bioactive surface modifications through thermally sprayed hydroxyapatite composite coatings: a review of selective reinforcements

N. Jagadeeshanayaka et al.

Summary: Hydroxyapatite (HA) is a promising replacement for natural bone in orthopedic applications, but its brittleness and low strength limit its use. Surface modification techniques, such as plasma spray, high-velocity oxy-fuel (HVOF), and cold spray, can improve the properties of HA implants without sacrificing biocompatibility. Various selective reinforcements, including carbon allotropes, metallic materials, ceramic materials, multi-materials, and functionally graded composites, have been explored to enhance the performance of HA. However, more research is needed on the effectiveness of these reinforcements and the interface between HA coating and reinforcements.

BIOMATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Biomaterials

Nanohydroxyapatite/graphene oxide nanocomposites modified with synthetic polymers: promising materials for bone tissue engineering applications

Felora Heshmatpour et al.

Summary: The study demonstrated that nano hydroxyapatite/graphene oxide composites modified by synthetic polymers showed enhanced cell viability and growth, indicating higher biocompatibility. Compared to composites made from natural polymers, the modified composites exhibited faster cell proliferation and growth.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A functionalised carbon nanotube-gelatin-Zn doped HA composite coating for bone grafting application

Ruonan Zhang et al.

Summary: Functionalized carbon nanotube-gelatin-Zn doped hydroxyapatite composite coatings were fabricated on carbon/carbon composites to improve surface bioactivity. The composite coatings showed excellent bonding strength and good in-vitro bioactivity, suggesting an effective method to enhance the surface bioactivity of carbon/carbon composites.

MATERIALS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of addition of hydroxyapatite as secondary filler in CNT-reinforced polypropylene hybrid composites

Babulal Chaudhary et al.

Summary: The research discusses the effectiveness of using HAp-coated MWCNTs in PP matrix composites, which significantly improves the mechanical properties of the materials. The enhancement in mechanical properties is attributed to the interfacial compatibility between HAp and PP.

POLYMERS & POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

Improvement of mechanical properties of hydroxyapatite composites reinforced with i-Al64Cu23Fe13 quasicrystal

Jose Castaneda-Via et al.

Summary: The mechanical strength of HAp/QC composites increases with the concentration of quasicrystalline reinforcement, with a 43% increase in Young's modulus and a 21% increase in compressive strength at a 10 wt% QC reinforcement. Additionally, the composite did not exhibit cytotoxicity at any QC concentration, indicating its potential for applications in the biomedical industry.

JOURNAL OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization of multi-walled carbon nanotubes decorated with hydroxyapatite

Madalina Elena David et al.

Summary: In this paper, multi-walled carbon nanotubes were prepared at low temperatures and pressure through a simple chemical method, with confirmation of their purity and morphology using various analytical techniques. The functionalization of multi-walled carbon nanotubes with hydroxyapatite was successfully achieved, as demonstrated by transmission electron microscopy, Fourier transformed infrared spectroscopy, and X-ray diffraction analysis. This simple approach may be extended to synthesize other composites based on coated multi-walled carbon nanotubes.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Tribo-mechanical properties evaluation of HA/TiO2/CNT nanocomposite

Erfan Zalnezhad et al.

Summary: A combination of reverse microemulsion and hydrothermal techniques were used to synthesize HA in this study, which was then used to synthesize HA/TiO2/CNT nanocomposite powders. The sample with the highest CNT content displayed superior surface hardness, lower wear rate, and a 58.1% higher Young's modulus compared to other samples. In addition, the in-vitro biocompatibility evaluation showed good binding of human MDA-MB-231 cell line to the surface of the HA/TiO2/CNT composites.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Functionalized multi-walled carbon nanotubes and hydroxyapatite nanorods reinforced with polypropylene for biomedical application

Fahad Saleem Ahmed Khan et al.

Summary: The study reinforced modified multi-walled carbon nanotubes and hydroxyapatite nanorods into polypropylene using a melt compounding approach to create biocomposites of varying compositions with improved mechanical, thermal, and biocompatibility properties. The addition of modified multi-walled carbon nanotubes was found to enhance tensile strength but decrease Young's modulus of the nanocomposites, while both fillers improved thermal and dimensional stability of polypropylene. These nanocomposites show promise for orthopedic applications, particularly in human subchondral bone and lightweight implant fabrication.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Electrodeposited Hydroxyapatite-Based Biocoatings: Recent Progress and Future Challenges

Mir Saman Safavi et al.

Summary: Hydroxyapatite has become a crucial coating material for bioimplants, requiring controlled surface roughness/porosity, corrosion resistance, and favorable tribological behavior. Electrodeposition offers advantages in controlling thickness and morphology, but there are still technical challenges that require further research.

COATINGS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Investigation on physicochemical properties of graphene oxide/nano-hydroxyapatite composites and its biomedical applications

Zebin Yang et al.

Summary: The GO/nHAP composites synthesized by simultaneous titration method exhibited good microstructure and stable chemical properties. They showed significant effects on cell proliferation and bioactivity, making them promising for bone regeneration and implantation applications.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comparison of tribological properties of nanolubricants containing carbon nanotori and additional additives

Estefany Tovar Sifuentes et al.

Summary: This study demonstrates the significant improvement in tribological properties by adding different inorganic nanoparticles to three types of lubricants, with carbon nanotori particles showing outstanding performance in water-based lubricant. The mechanisms of carbon nanotori provide both rolling/sliding effect under anti-wear conditions and load-bearing effect under extreme pressure conditions.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Review Polymer Science

Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering

Sybele Saska et al.

Summary: 3D printing is valuable in tissue engineering, but the structures produced are static. 4D printing is a new technology that uses smart materials to enable dynamic changes in printed structures, allowing engineered tissues to undergo planned morphological changes.

POLYMERS (2021)

添加到收藏夹

Review Crystallography

Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction

Hui Shi et al.

Summary: Hydroxyapatite is widely used in bone tissue engineering for its bioactivity and biocompatibility, with researchers exploring ways to improve its physical properties and biological functions. Functionalized HA has been prepared using methods such as ion doping and surface modification, and applications in bone tissue engineering have been discussed in this review. The review provides a general understanding of the development of hydroxyapatite-based materials for researchers.

CRYSTALS (2021)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Insights on functionalized carbon nanotubes for cancer theranostics

Lu Tang et al.

Summary: Nanobiotechnology has made significant progress in cancer therapy, with carbon nanotubes showing success in drug delivery for multifunctional cancer treatment and diagnosis. Their abilities in precise drug release, improving solubility, reducing side effects, and targeting tumor cells and microenvironment make them promising for therapeutic applications in cancer.

JOURNAL OF NANOBIOTECHNOLOGY (2021)

添加到收藏夹

Article Geochemistry & Geophysics

A Study of Thermal Stability of Hydroxyapatite

Natalia V. Bulina et al.

Summary: High-temperature powder sintering is crucial in dense ceramic manufacturing process. The research found that the thermal stability of hydroxyapatite is influenced by the Ca/P ratio, and rapid heating can lead to its congruent melting, forming recrystallized oxyhydroxyapatite.

MINERALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Ambient temperature sulfonated carbon fiber reinforced PEEK with hydroxyapatite and reduced graphene oxide hydroxyapatite composite coating

Naomi Addai Asante et al.

Summary: By using a combined surface modification technique, including sulfonation and surface coating with different composites, 30%CFR-PEEK was enhanced with improved hydrophilicity and bioactivity, showing potential for successful application in the orthopedic industry.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Improved nanomechanical and in-vitro biocompatibility of graphene oxide-carbon nanotube hydroxyapatite hybrid composites by synergistic effect

Jeevan Jyoti et al.

Summary: Hydroxyapatite (HAP) is a promising material for bone growth and tissue repair due to its similarity to natural apatite. However, its brittleness and poor mechanical properties have limited its clinical applications. Carbon nanofiller reinforced HAP composites, particularly those with GCNTs, show improved nanomechanical properties and biocompatibility, with potential for bone repair and regeneration.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Comparison between hydroxyapatite/soapstone and hydroxyapatite/ reduced graphene oxide composite coatings: Synthesis and property improvement

Daniel Nilson Nunes Nicomedes et al.

Summary: Talc from soapstone shows promise as a replacement for graphene oxide in reinforcement for hydroxyapatite coatings without compromising properties. The use of electrodeposition on titanium substrate successfully deposited the composite coatings in a low-cost and eco-friendly manner.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Mechanical Properties and Bioactivity of Polyetheretherketone/Hydroxyapatite/Carbon Fiber Composite Prepared by the Mechanofusion Process

In Sung Jeon et al.

Summary: This study aims to overcome the main obstacles in the melt-processing of polyetheretherketone/hydroxyapatite/carbon fiber composites by preparing high-performance composites using two non-melt blending methods. The experimental results showed that the composites prepared by mechanofusion process exhibited better mechanical properties and bioactivity.

POLYMERS (2021)

添加到收藏夹

Article Crystallography

Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Edna X. Figueroa-Rosales et al.

Summary: Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were prepared by the co-precipitation method and characterized using spectroscopic techniques. The composite with functionalized MWCNTs exhibited intense white emission under UV-vis radiation, suggesting potential applications.

CRYSTALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polyacrylonitrile/Carbon Black nanoparticle/Nano-Hydroxyapatite (PAN/nCB/HA) composite nanofibrous matrix as a potential biomaterial scaffold for bone regenerative applications

Md. Kaiser Haider et al.

Summary: The study fabricated composite nanofibrous scaffolds from blends of PAN, nCB, and HA via electrospinning to observe the effect of nCB on membrane properties. The results showed that the addition of nCB reduced the average diameter of nanofibers and improved the mechanical performance of the scaffold. Excellent mineralization and biocompatibility were observed, indicating strong potential for use as bone and hard tissue restoring materials.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphene Oxide/Chitosan/Hydroxyapatite Composite Membranes Enhance Osteoblast Adhesion and Guided Bone Regeneration

Sudan Liu et al.

Summary: Graphene oxide (GO) has good mechanical and hydrophilic properties, but a single GO membrane is not ideal for osteogenic cell adhesion. Composite membranes containing chitosan (CS) and hydroxyapatite (HAP) can simulate the multicomponent structure of an extracellular matrix for enhanced cell adhesion. The addition of HAP improves mechanical strength and cell adhesion, differentiation, and mineralization of osteoblasts, making GO/CS/HAP composite membranes a potential material for guided bone regeneration (GBR).

ACS APPLIED BIO MATERIALS (2021)

添加到收藏夹

Review Materials Science, Biomaterials

Recent advances in magnetic carbon nanotubes: synthesis, challenges and highlighted applications

Jiabei Guo et al.

Summary: Magnetic carbon nanotubes (MCNTs) have unique physical and chemical properties, making them widely used in magnetic solid-phase extraction, sensors, antibacterial agents, imaging system contrast agents, drug delivery, and catalysis. Recent solutions proposed by researchers aim to overcome the drawbacks of MCNTs and provide directions for future research.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

添加到收藏夹

Article Materials Science, Ceramics

Biowaste-derived carbon dots/hydroxyapatite nanocomposite as drug delivery vehicle for acetaminophen

Hui Khee Chung et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

One step synthesis of N-doped carbon dots/hydroxyapatite:Eu,Gd composite with dual-emissive and solid-state photoluminescence

Qing Chang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Environmental

Polymer Nanocomposites Based on Poly(ε-caprolactone), Hydroxyapatite and Graphene Oxide

Gabriela S. Medeiros et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dependence of photocatalytic performance on interfacial reaction in carbon dots/mesoporous hydroxyapatite nanocomposites

Wei Xu et al.

MICRO & NANO LETTERS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation of Tubular Forest-like and Other Carbon Structures Using Distinct Carbon Sources and Catalyst Concentrations

Beatriz O. Garcia et al.

RECENT PATENTS ON NANOTECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Biomedical

Four-dimensional bioprinting: Current developments and applications in bone tissue engineering

Zhuqing Wan et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Article Materials Science, Paper & Wood

Active loading graphite/hydroxyapatite into the stable hydroxyethyl cellulose scaffold nanofibers for artificial cornea application

Davood Kharaghani et al.

CELLULOSE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Corrosion behaviour of plasma sprayed graphene nanoplatelets reinforced hydroxyapatite composite coatings in simulated body fluid

Swarnima Singh et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhanced fracture toughness of three dimensional graphene-hydroxyapatite nanocomposites by employing the Taguchi method

Hassan Nosrati et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Composites

Mechanical, tribological, and biological properties of carbon fiber/hydroxyapatite reinforced hybrid composites

Yasin Akgul et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Engineering, Chemical

Electrodeposition of Hydroxyapatite-Multiwalled Carbon Nanotube Nanocomposite on Ti6Al4V

Thom T. Nguyen et al.

ADVANCES IN POLYMER TECHNOLOGY (2020)

添加到收藏夹

Review Chemistry, Analytical

Carbon Allotrope-Based Optical Fibers for Environmental and Biological Sensing: A Review

Stephanie Hui Kit Yap et al.

SENSORS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesizing surface modified hydroxyapatite embedded in three-dimensional graphene oxide networks for drug loading

Mi Tang et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Carbon fiber reinforced hydroxyapatite composites with excellent mechanical properties and biological activities prepared by spark plasma sintering

Xueni Zhao et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent trends on density functional theory-assisted calculations of structures and properties of metal-organic frameworks and metal-organic frameworks-derived nanocarbons

Oxana V. Kharissova et al.

JOURNAL OF MATERIALS RESEARCH (2020)

添加到收藏夹

Review Chemistry, Analytical

Carbon Nanomaterials as Versatile Platforms for Biosensing Applications

Hye Suk Hwang et al.

MICROMACHINES (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Simultaneous fabrication of carbon nanodots and hydroxyapatite nanoparticles from fish scale for biomedical applications

Jegan Athinarayanan et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Current Challenges and Innovative Developments in Hydroxyapatite-Based Coatings on Metallic Materials for Bone Implantation: A Review

Bilal Beig et al.

COATINGS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Tailoring Cu substituted hydroxyapatite/functionalized multiwalled carbon nanotube composite coating on 316L SS implant for enhanced corrosion resistance, antibacterial and bioactive properties

Durairaj Sivaraj et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Chemistry, Analytical

A nanocomposite optosensor of hydroxyapatite and graphene quantum dots embedded within highly specific polymer for norfloxacin detection

Opas Bunkoed et al.

MICROCHEMICAL JOURNAL (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Catalysis using metal-organic framework-derived nanocarbons: Recent trends

Oxana Kharissova et al.

JOURNAL OF MATERIALS RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polymer-assisted synthesis and applications of hydroxyapatite (HAp) anchored nitrogen-doped 3D graphene foam-based nanostructured ceramic framework

Murugesan Manoj et al.

RSC ADVANCES (2020)

添加到收藏夹

Article Engineering, Chemical

Hydroxyapatite conjugated graphene nanoplatelets vs. multi-walled carbon nanotubes for enhanced dye removal

Vijaykiran N. Narwade et al.

DESALINATION AND WATER TREATMENT (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigating the mechanical behavior of hydroxyapatite-reduced graphene oxide nanocomposite under different loading rates

Hassan Nosrati et al.

NANO EXPRESS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Hemocompatibility of Carbon Nanostructures

Mariangela Fedel

C-JOURNAL OF CARBON RESEARCH (2020)

添加到收藏夹

Article Engineering, Biomedical

Single-walled carbon nanotubes loaded hydroxyapatite-alginate beads with enhanced mechanical properties and sustained drug release ability

L. B. Sukhodub et al.

PROGRESS IN BIOMATERIALS (2020)

添加到收藏夹

Review Engineering, Chemical

Carbon-Carbon Allotropic Hybrids and Composites: Synthesis, Properties, And Applications

Oxana V. Kharissova et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High loads of nano-hydroxyapatite/graphene nanoribbon composites guided bone regeneration using an osteoporotic animal model

Francilio Carvalho Oliveira et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2019)

添加到收藏夹

Article Chemistry, Physical

Novel synthesis of bioactive hydroxyapatite/f-multiwalled carbon nanotube composite coating on 316L SS implant for substantial corrosion resistance and antibacterial activity

D. Sivaraj et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

Carbon-Based Nanomaterials for Biomedical Applications: A Recent Study

Debabrata Maiti et al.

FRONTIERS IN PHARMACOLOGY (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Carbon based nanomaterials for tissue engineering of bone: Building new bone on small black scaffolds: A review

Reza Eivazzadeh-Keihan et al.

JOURNAL OF ADVANCED RESEARCH (2019)

添加到收藏夹

Article Engineering, Biomedical

Effects of the addition of boron nitride nanoplate on the fracture toughness, flexural strength, and Weibull Distribution of hydroxyapatite composites prepared by spark plasma sintering

Trevor G. Aguirre et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Facile synthesis of carbon fiber reinforced polymer-hydroxyapatite ternary composite: A mechanically strong bioactive bone graft

Chandrani Sarkar et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Preparation and properties of carbon nanotube (Fe)/hydroxyapatite composite as magnetic targeted drug delivery carrier

Haipeng Li et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Environmental

Waste Eggshells for the Decoration of Carbon Nanotubes and Graphene Nanosheets with Hydroxyapatite for Preparation of LLDPE Nanocomposites

Bhushan C. Chaudhari et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

被撤回的出版物: Fabrication of Graphene Nanoplatelet-Incorporated Porous Hydroxyapatite Composites: Improved Mechanical and in Vivo Imaging Performances for Emerging Biomedical Applications (Retracted article. See vol. 5, pg. 26956, 2020)

Sunil Kumar et al.

ACS OMEGA (2019)

添加到收藏夹

Article Engineering, Chemical

HYDROXYAPATITE - CARBON NANOTUBE COMPOSITES FOR DRUG DELIVERY APPLICATIONS

Reka Barabas et al.

BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2019)

添加到收藏夹

Review Materials Science, Ceramics

GRAPHENE OXIDE-MODIFIED HYDROXYAPATITE NANOCOMPOSITES IN BIOMEDICAL APPLICATIONS: A REVIEW

Norsuriani Che Hashim et al.

CERAMICS-SILIKATY (2019)

添加到收藏夹

Review Engineering, Chemical

All-Carbon Hybrid Aerogels: Synthesis, Properties, and Applications

Oxana V. Kharissova et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

添加到收藏夹

Article Chemistry, Applied

C60 fullerene loaded hydroxyapatite-chitosan beads as a promising system for prolonged drug release

L. B. Sukhodub et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Biocompatible and photoluminescent carbon dots/hydroxyapatite/PVA dual-network composite hydrogel scaffold and their properties

Yanqin Wang et al.

JOURNAL OF POLYMER RESEARCH (2019)

添加到收藏夹

Review Polymer Science

Review of Polymeric Materials in 4D Printing Biomedical Applications

Ming-You Shie et al.

POLYMERS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Applications of Carbon Nanotubes in Bone Tissue Regeneration and Engineering: Superiority, Concerns, Current Advancements, and Prospects

Baoqing Pei et al.

NANOMATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improvement in Tribological Properties of Plasma-Sprayed Alumina Coating upon Carbon Nanotube Reinforcement

Sudhakar C. Jambagi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Engineering, Biomedical

Mechanical properties of highly porous PEEK bionanocomposites incorporated with carbon and hydroxyapatite nanoparticles for scaffold applications

Md Nizam Uddin et al.

PROGRESS IN BIOMATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chitosan/hydroxyapatite modified carbon/carbon composites: synthesis, characterization and in vitro biocompatibility evaluation

Wenbo Wang et al.

RSC ADVANCES (2019)

添加到收藏夹

Article Polymer Science

Mechanical, pH and Thermal Stability of Mesoporous Hydroxyapatite

Joanna Kamieniak et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Accelerated Bone Regeneration by Nitrogen-Doped Carbon Dots Functionalized with Hydroxyapatite Nanoparticles

Deepak Kumar Khajuria et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of nanodiamond-reinforced hydroxyapatite composite coatings deposited by suspension plasma spraying

Xiuyong Chen et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Applied

One pot synthesis of carbon dots decorated carboxymethyl cellulose-hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing

Chandrani Sarkar et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Electrochemistry

A promising hydroxyapatite/graphene hybrid nanocomposite for methylene blue dye's removal in wastewater treatment

Mohamed A. Hassan et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Plasma-Sprayed Hydroxylapatite Coatings as Biocompatible Intermediaries Between Inorganic Implant Surfaces and Living Tissue

Robert B. Heimann

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)

添加到收藏夹

Review Engineering, Chemical

Solubilization and Dispersion of Carbon Allotropes in Water and Non-aqueous Solvents

Oxana V. Kharissova et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Review Chemistry, Physical

A Review on the Use of Hydroxyapatite-Carbonaceous Structure Composites in Bone Replacement Materials for Strengthening Purposes

Humair A. Siddiqui et al.

MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Self-Assembled Hydroxyapatite-Graphene Scaffold for Photothermal Cancer Therapy and Bone Regeneration

Dejian Li et al.

JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of Nano-Hydroxyapatite Coated Carbon Nanotube Reinforced Hydroxyapatite Composites

Xueni Zhao et al.

COATINGS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development and Characterization of Biomimetic Carbonated Calcium-Deficient Hydroxyapatite Deposited on Carbon Fiber Scaffold

Quentin Picard et al.

C-JOURNAL OF CARBON RESEARCH (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Overview of Hydroxyapatite-Graphene Nanoplatelets Composite as Bone Graft Substitute: Mechanical Behavior and In-vitro Biofunctionality

Wan Jeffrey Basirun et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2018)

添加到收藏夹

Review Engineering, Biomedical

An overview of graphene-based hydroxyapatite composites for orthopedic applications

Ming Li et al.

BIOACTIVE MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bacterial Stress and Osteoblast Responses on Graphene Oxide-Hydroxyapatite Electrodeposited on Titanium Dioxide Nanotube Arrays

Yardnapar Parcharoen et al.

JOURNAL OF NANOMATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

4D printing of polymeric materials for tissue and organ regeneration

Shida Miao et al.

MATERIALS TODAY (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fullerene: biomedical engineers get to revisit an old friend

Saba Goodarzi et al.

MATERIALS TODAY (2017)

添加到收藏夹

Article Acoustics

Fe3O4/hydroxyapatite/graphene quantum dots as a novel nano-sorbent for preconcentration of copper residue in Thai food ingredients: Optimization of ultrasound-assisted magnetic solid phase extraction

Phitchan Sricharoen et al.

ULTRASONICS SONOCHEMISTRY (2017)

添加到收藏夹

Article Medicine, Research & Experimental

Fabrication and Characterization of Carbon Fiber-Reinforced Nano-Hydroxyapatite/Polyamide46 Biocomposite for Bone Substitute

Zhennan Deng et al.

MEDICAL SCIENCE MONITOR (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Preparation and characterization of mechanical properties of carbon nanotube reinforced hydroxyapatite composites consolidated by spark plasma sintering

Ye Meng et al.

2017 2ND INTERNATIONAL SEMINAR ON ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Applied

Hydroxyapatite composites with multiwalled carbon nanotubes

Ewa Skwarek et al.

ADSORPTION SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carbon Nanofiber/Polycaprolactone/Mineralized Hydroxyapatite Nanofibrous Scaffolds for Potential Orthopedic Applications

Shinyjoy Elangomannan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Review Engineering, Biomedical

4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials

Yi-Chen Li et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Chemistry, Applied

Self-assembled high-strength hydroxyapatite/graphene oxide/chitosan composite hydrogel for bone tissue engineering

Peng Yu et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Chemistry, Physical

Fabrication and properties of carbon nanotube-reinforced hydroxyapatite composites by a double in situ synthesis process

Haipeng Li et al.

CARBON (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Magical Allotropes of Carbon: Prospects and Applications

Santosh K. Tiwari et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication and characterization of drug-loaded nano-hydroxyapatite/polyamide 66 scaffolds modified with carbon nanotubes and silk fibroin

Meng-Zhu Yao et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carbon Nanotubes-Hydroxyapatite Nanocomposites for an Improved Osteoblast Cell Response

Sabrina Constanda et al.

JOURNAL OF NANOMATERIALS (2016)

添加到收藏夹

Article Engineering, Biomedical

Enhanced bone regeneration with carbon nanotube reinforced hydroxyapatite in animal model

Susmita Mukherjee et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Hydroxyapatite formation on graphene oxide modified with amino acids: arginine versus glutamic acid

M. Tavafoghi et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydroxyapatite supported N-doped carbon quantum dots for visible-light photocatalysis

Q. Chang et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Materials Science, Biomaterials

Pressureless sintering and mechanical properties of hydroxyapatite/functionalized multi-walled carbon nanotube composite

M. J. Abden et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

添加到收藏夹

Article Materials Science, Biomaterials

Improvement of the fracture toughness of hydroxyapatite (HAp) by incorporation of carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and nylon

S. P. Khanal et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

添加到收藏夹

Article Chemistry, Physical

Biomimetic 4D printing

A. Sydney Gladman et al.

NATURE MATERIALS (2016)

添加到收藏夹

Proceedings Paper Green & Sustainable Science & Technology

Effect of hydroxyapatite reinforced with 45S5 glass on physical, structural and mechanical properties

N. A. Zarifah et al.

5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP) (2016)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and characterization of carboxyl functionalized multiwall carbon nanotubes-hydroxyapatite composites

Reka Barabas et al.

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Materials Science, Composites

Synthesis of carbon nanotubes/hydroxyapatite composites using catalytic methane cracking

Bruna Rego De Vasconcelos et al.

COMPOSITE INTERFACES (2015)

添加到收藏夹

Article Chemistry, Physical

Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid

Ana Jankovic et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis and Characterization of Hydroxyapatite/Fullerenol Nanocomposites

Aleksandar Djordjevic et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graphene and hydroxyapatite self-assemble into homogeneous, free standing nanocomposite hydrogels for bone tissue engineering

Xingyi Xie et al.

NANOSCALE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reduced graphene oxide-coated hydroxyapatite composites stimulate spontaneous osteogenic differentiation of human mesenchymal stem cells

Jong Ho Lee et al.

NANOSCALE (2015)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Calcium hydroxyapatite in hydroxyapatite/graphene oxide/collagen nanohybrids

N. A. Zakharov et al.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced Osteogenesis by Reduced Graphene Oxide/Hydroxyapatite Nanocomposites

Jong Ho Lee et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrochemical synthesis of nanosized hydroxyapatite/graphene composite powder

Vesna Miskovic-Stankovic et al.

CARBON LETTERS (2015)

添加到收藏夹

Article Toxicology

Carbon nanotube-reinforced hydroxyapatite composite and their interaction with human osteoblast in vitro

P. Khalid et al.

HUMAN & EXPERIMENTAL TOXICOLOGY (2015)

添加到收藏夹

Article Chemistry, Physical

Graphene oxide/hydroxyapatite composite coatings fabricated by electrophoretic nanotechnology for biological applications

Ming Li et al.

CARBON (2014)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Efficient capture of strontium from aqueous solutions using graphene oxide-hydroxyapatite nanocomposites

Tao Wen et al.

DALTON TRANSACTIONS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hydroxyapatite-Functionalized Graphene: A New Hybrid Nanomaterial

C. Rodriguez-Gonzalez et al.

JOURNAL OF NANOMATERIALS (2014)

添加到收藏夹

Review Nanoscience & Nanotechnology

A Review on Characterizations and Biocompatibility of Functionalized Carbon Nanotubes in Drug Delivery Design

Julia M. Tan et al.

JOURNAL OF NANOMATERIALS (2014)

添加到收藏夹

Article Biophysics

Characterization of thermal sprayed hydroxyapatite coatings on some biomedical implant materials

Tejinder Pal Singh et al.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

Carbon foam/hydroxyapatite coating for carbon/carbon composites: Microstructure and biocompatibility

Zhang Leilei et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method

D. Gopi et al.

CORROSION SCIENCE (2013)

添加到收藏夹

Article Materials Science, Biomaterials

Synthesis of hydroxyapatite-reduced graphite oxide nanocomposites for biomedical applications: oriented nucleation and epitaxial growth of hydroxyapatite

Yi Liu et al.

JOURNAL OF MATERIALS CHEMISTRY B (2013)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical Properties and Microstructure of Short Carbon Fiber Reinforced Hydroxyapatite Bio-composite

Wang Xinguang et al.

ENERGY, ENVIRONMENT AND BIOLOGICAL MATERIALS (2011)

添加到收藏夹

Article Materials Science, Ceramics

F-substituted hydroxyapatite nanopowders: Thermal stability, sintering behaviour and mechanical properties

Alessandra Bianco et al.

CERAMICS INTERNATIONAL (2010)

添加到收藏夹

Article Polymer Science

Preparation and Properties of Carbon Fiber/Hydroxyapatite-Poly(methyl methacrylate) Biocomposites

Huang Jianfeng et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Biomimetic hydroxyapatite nanocrystals in composites with C60 and Au-DNA nanoparticles: IR-spectral study

Iryna Sporysh et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2010)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

A Review on Less-common Nanostructures

Oxana V. Kharissova et al.

SYNTHESIS AND REACTIVITY IN INORGANIC METAL-ORGANIC AND NANO-METAL CHEMISTRY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of high specific surface area hydroxyapatite for environmental applications

Cedric Verwilghen et al.

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Engineering, Biomedical

Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro

Kantesh Balani et al.

BIOMATERIALS (2007)

添加到收藏夹

Review Materials Science, Ceramics

Hydroxyapatite-carbon nanotube composites for biomedical applications: A review

Ashley A. White et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Manufacturing

Development of carbon nanofiber reinforced hydroxyapatite with enhanced mechanical properties

Satoshi Kobayashi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Apparent solubility of hydroxyapatite in aqueous medium and its influence on the morphology of nanocrystallites with precipitation temperature

K. H. Prakash et al.

LANGMUIR (2006)

添加到收藏夹

Article Chemistry, Physical

The biocompatibility of carbon nanotubes

SK Smart et al.

CARBON (2006)

添加到收藏夹

Review Chemistry, Multidisciplinary

Toxicity and biocompatibility of carbon nanoparticles

S Fiorito et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2006)

添加到收藏夹

Article Physics, Applied

Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite composite coatings

Y Chen et al.

APPLIED PHYSICS LETTERS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.