☆ 4.7 Article

A survey of research status on the environmental adaptation technologies for marine robots

OCEAN ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Ocean

Effect of the implosion of a deep-sea pressure hull on surrounding structures

Yu Wu et al.

Summary: This study investigates the damage caused to surrounding structures by the implosion of a scaled-down submersible pressure hull model in an ultra-high-pressure chamber. A numerical method is developed to predict the multiphase coupling interactions between liquid, gaseous, and solid for two deep-sea pressure hulls. The study also examines the effect of the shock wave caused by implosion on the nearby pressure hull and analyzes the variation in strain energy of the surrounding hull under implosion.

APPLIED OCEAN RESEARCH (2023)

添加到收藏夹

Article Engineering, Marine

An underwater bionic crab soft robot with multidirectional controllable motion ability

Qingzhong Li et al.

Summary: In this paper, an underwater bionic crab soft robot based on dielectric elastomer (DE) is developed, which has high adaptability and seamless interaction with human beings. Through regulation of the power supply and frequency, it can achieve multidirectional movement and obstacle avoidance capability in water. The fastest ascent speed of the bionic soft robot in water is 37.5 mm/s. The hydrodynamic theoretical model and computational fluid dynamics simulations are used to optimize the swimming efficiency. Experimental results verify the correctness of the theoretical models and numerical simulations. Compared with other underwater soft robots, bionic soft robots have outstanding advantages such as fast speed, high efficiency, multiple modes of motion and excellent underwater adaptability.

OCEAN ENGINEERING (2023)

添加到收藏夹

Article Engineering, Mechanical

A failure analysis of the cylinder and connection bolts in a buoyancy regulator of an underwater glider

Chiye Yang et al.

Summary: This paper uses a finite element method to study the failures of the cylinder and connection bolts in the buoyancy regulator. The effect of ovality on cylinder sealing and scratching failures is analyzed, and suggestions for improving the cylinder design are introduced. The specific reasons for the failures of the connection bolts are also investigated and methods for optimization design are provided. This paper provides a failure analysis and structural optimization method for buoyancy regulators.

ENGINEERING FAILURE ANALYSIS (2023)

添加到收藏夹

Article Engineering, Marine

Influence of ambient pressure on sealing performance of O-ring in deep-sea hydraulic system

Jia-Bin Wu et al.

Summary: This paper investigates the impact of ambient pressure on the sealing performance of O-ring seals in deep-sea hydraulic systems. Through analysis and simulation, a nonlinear model of the O-ring seal is established to evaluate its performance. The findings provide reference and support for the design and optimization of O-ring seals in deep-sea conditions.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Ocean

Smart anomaly detection for Slocum underwater gliders with a variational autoencoder with long short-term memory networks

Zachary Bedja-Johnson et al.

Summary: This article proposes an online anomaly detection system for underwater gliders based on a data-driven approach. With the use of a novel LSTM-VAE model, the system is able to accurately detect wing loss and biofouling, showcasing its generality to different platforms and types of anomalies.

APPLIED OCEAN RESEARCH (2022)

添加到收藏夹

Article Engineering, Marine

Data-driven optimization design of a novel pressure hull for AUV

Ming Yang et al.

Summary: This paper presents a novel design of a ring-stiffened arched cylindrical (RAC) hull for autonomous underwater vehicles (AUVs), and proposes a data-driven approach for efficiently designing pressure hulls with irregular structures. The optimization design of the RAC structure for AUV is performed, and pressure tests are carried out to verify the proposed approach.

OCEAN ENGINEERING (2022)

添加到收藏夹

Review Environmental Sciences

Science and Dissemination for the UN Ocean Decade Outcomes: Current Trends and Future Perspectives

Francesco Caruso et al.

Summary: The Ocean Decade is a United Nations initiative that focuses on ocean science for sustainable development. It aims to strengthen the sustainable management of oceans and coasts and bring benefits for future generations. The Ocean Decade establishes a common strategy to achieve the objectives of the 2030 Agenda for Sustainable Development and other international agreements. Marine research plays a crucial role in addressing complex challenges and revolutionizing our interaction with the ocean.

FRONTIERS IN MARINE SCIENCE (2022)

添加到收藏夹

Article Automation & Control Systems

Reversible fuel cell enabled underwater buoyancy control

Alicia Li Jen Keow et al.

Summary: A variable buoyancy system operated by a reversible fuel cell with feedback depth control has been developed. The system changes its buoyancy by inflating or deflating a bladder using gases produced by electrolysis or consumed through fuel cells. It offers advantages in energy efficiency, noiselessness, and compactness, making it suitable for integration with other underwater robots. The system is equipped with a PDA feedback controller to regulate the electrochemical process for positioning and stabilizing the device at a certain depth. The results from experiments confirm the effectiveness of the controller in tracking references and achieving fine depth control.

MECHATRONICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Multi-environment robotic transitions through adaptive morphogenesis

Robert Baines et al.

Summary: The proliferation of mobile robots in various applications presents a challenge for traditional design strategies. This study introduces adaptive morphogenesis as a design strategy to achieve specialized multi-environment locomotion using a combination of rigid components and soft materials.

NATURE (2022)

添加到收藏夹

Article Engineering, Marine

Study of pressure-balanced oil-filled (PBOF) technology

Wentao Song et al.

Summary: This paper presents a detailed investigation of PBOF technology and the development of a resilient bladder for underwater wet-mateable connectors (WMCs). Through theoretical derivation and finite element analysis, a novel resilient bladder with a simple structure has been developed, and its performance has been tested.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation and theoretical evaluation on the leakage mechanisms of seawater hydraulic axial piston pump under sea depth circumstance

Kai Ma et al.

Summary: This paper designs and establishes a testing system for the SHAPP in a deep-sea environment, studies the leakage mechanisms of the SHAPP, and finds that the piston and piston bush produce micron deformation under sea depth circumstance, and the compaction coefficient of the plane pair decreases gradually with the increase of sea depth, leading to an increase in leakage.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Civil

A semi-analytical analysis of strength and critical buckling behavior of underwater ring-stiffened cylindrical shells

Yang Yang et al.

Summary: This paper investigates the strength and buckling behavior analysis of a ring-stiffened cylindrical shell for sightseeing submersibles under mechanical and thermal loads. It shows that external load has the most significant influence on the shell's strength, while shell thickness has the most obvious effect on its buckling load.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Autosub Long Range 6000: A Multiple-Month Endurance AUV for Deep-Ocean Monitoring and Survey

Daniel Roper et al.

Summary: Autosub Long Range 6000 is an autonomous underwater vehicle capable of long-range deployments, reaching depths of 6000 meters and covering distances of up to 1800 km. Its high endurance is achieved through the use of high energy-density lithium primary cells and energy optimization for all subsystems. The article quantifies power consumption and makes predictions for range and endurance based on theory and initial trial results, while also providing an overview of early science deployments.

IEEE JOURNAL OF OCEANIC ENGINEERING (2021)

添加到收藏夹

Article Engineering, Marine

Study on carbon fiber composite hull for AUV based on response surface model and experiments

Jixin Liu et al.

Summary: This study investigates the strength and stability of a carbon fiber composite cylindrical hull with strengthening ribs for an AUV using FEA and RSM. Critical design parameters are determined based on empirical formulas and test results, with parameter sensitivity analysis and response surface optimization conducted. A response surface quadratic model is established to evaluate the accuracy and determine final parameters for hull strength and stability, which is verified through tests and engineering applications.

OCEAN ENGINEERING (2021)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Soft robot reaches the deepest part of the ocean

Cecilia Laschi et al.

NATURE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Self-powered soft robot in the Mariana Trench

Guorui Li et al.

Summary: The deep sea, with its high pressure, remains a challenge to explore, but certain deep-sea creatures are able to thrive at extreme depths. By integrating electronics in a silicone matrix, we developed an untethered soft robot for deep-sea exploration, showcasing the potential of designing soft, lightweight devices for extreme conditions.

NATURE (2021)

添加到收藏夹

Article Engineering, Marine

Optimal design and strength reliability analysis of pressure shell with grid sandwich structure

Ning Li et al.

Summary: This study focuses on lightweight optimum design of head pressure shell of an autonomous underwater vehicle (AUV) with reliability requirements. A grid sandwich structure is applied and an optimal mathematical model is established, solved by genetic algorithm based on back propagation neural network surrogate model and optimized by particle swarm optimization. Randomness of geometry sizes, material properties and loads are considered for reliability, showing a reduction in weight and successful optimization of the pressure shell design.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Estimation of ultimate strength of ring-stiffened cylindrical shells under external pressure with local shell buckling or torsional buckling of stiffeners

Daisuke Shiomitsu et al.

Summary: This study investigates the influence of initial deflection shape on the ultimate strength of ring-stiffened cylindrical shells through analyzing 432 models. A new slenderness ratio is proposed for estimating strength based on the circumferential stress reaching yield stress, and theoretical formulas for ultimate strength are developed using this ratio.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

Monitoring marine environments with Autonomous Underwater Vehicles: A bibliometric analysis

Fabiana Di Ciaccio et al.

Summary: Sustainable monitoring of the environment is crucial for assessing its current status, especially with the increasing impact of pollutants on marine ecosystems. The use of Autonomous Underwater Vehicles has proven to be more cost-effective and time-efficient for research and monitoring operations. Bibliometric analysis can help identify major research interests and current weaknesses in the field of using AUVs for environmental research.

RESULTS IN ENGINEERING (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Low-power microelectronics embedded in live jellyfish enhance propulsion

Nicole W. Xu et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Engineering, Marine

Buckling Analysis of an AUV Pressure Vessel with Sliding Stiffeners

Artur Siqueira Nobrega de Freitas et al.

JOURNAL OF MARINE SCIENCE AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Marine

Dynamic modeling and endurance enhancement analysis of deep-sea gliders with a hybrid buoyancy regulating system

Hexiong Zhou et al.

OCEAN ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Analytical

Development and Experiments of an Electrothermal Driven Deep-Sea Buoyancy Control Module

Jiaoyi Hou et al.

MICROMACHINES (2020)

添加到收藏夹

Review Energy & Fuels

Ocean thermal energy application technologies for unmanned underwater vehicles: A comprehensive review

Guohui Wang et al.

APPLIED ENERGY (2020)

添加到收藏夹

Review Environmental Sciences

A review of unmanned vehicles for the detection and monitoring of marine fauna

Ursula K. Verfuss et al.

MARINE POLLUTION BULLETIN (2019)

添加到收藏夹

Article Ecology

Morphology and genome of a snailfish from the Mariana Trench provide insights into deep-sea adaptation

Kun Wang et al.

NATURE ECOLOGY & EVOLUTION (2019)

添加到收藏夹

Article Engineering, Marine

Dynamic modeling and motion analysis for a dual-buoyancy-driven full ocean depth glider

Shuxin Wang et al.

OCEAN ENGINEERING (2019)

添加到收藏夹

Article Robotics

Ultragentle manipulation of delicate structures using a soft robotic gripper

Nina R. Sinatra et al.

SCIENCE ROBOTICS (2019)

添加到收藏夹

Review Engineering, Marine

A review on the modeling, materials, and actuators of aquatic unmanned vehicles

R. Salazar et al.

OCEAN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Marine

Non-probabilistic reliability analysis and design optimization for valve-port plate pair of seawater hydraulic pump for underwater apparatus

Fanglong Yin et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Review Engineering, Marine

The potential of low-cost ROV for use in deep-sea mineral, ore prospecting and monitoring

Jonathan Teague et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Robotics

Rotary-actuated folding polyhedrons for midwater investigation of delicate marine organisms

Zhi Ern Teoh et al.

SCIENCE ROBOTICS (2018)

添加到收藏夹

Article Robotics

Exploration of underwater life with an acoustically controlled soft robotic fish

Robert K. Katzschmann et al.

SCIENCE ROBOTICS (2018)

添加到收藏夹

Review Automation & Control Systems

Challenges and future trends in marine robotics

Enrica Zereik et al.

ANNUAL REVIEWS IN CONTROL (2018)

添加到收藏夹

Article Engineering, Marine

Printed pressure housings for underwater applications

K. Breddermann et al.

OCEAN ENGINEERING (2016)

添加到收藏夹

Article Robotics

Soft Robotic Grippers for Biological Sampling on Deep Reefs

Kevin C. Galloway et al.

SOFT ROBOTICS (2016)

添加到收藏夹

Article Mechanics

Initiation of failure at notches in unidirectional fiber composites

Jens L. Wind et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel

Liang Wang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Design optimization of lay-up and composite material system to achieve minimum buoyancy factor for composite elliptical submersible pressure hull

Elsayed Fathallah et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Instruments & Instrumentation

Design and testing of a shape memory alloy buoyancy engine for unmanned underwater vehicles

Alex J. Angilella et al.

SMART MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Characterization & Testing

Novel mechanical characterization method for deep sea buoyancy material under hydrostatic pressure

Maelenn Le Gall et al.

POLYMER TESTING (2014)

添加到收藏夹

Article Materials Science, Composites

Optimization of Composite Material System and Lay-up to Achieve Minimum Weight Pressure Vessel

Haris Hameed Mian et al.

APPLIED COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Business

Accelerating the development of marine energy: Exploring the prospects, benefits and challenges

Henry Jeffrey et al.

TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2013)

添加到收藏夹

Article Automation & Control Systems

Girona 500 AUV: From Survey to Intervention

David Ribas et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2012)

添加到收藏夹

Article Engineering, Civil

Reliability based optimization of laminated composite structures using genetic algorithms and Artificial Neural Networks

Herbert Martins Gomes et al.

STRUCTURAL SAFETY (2011)

添加到收藏夹

Article Engineering, Civil

A variable buoyancy control system for a large AUV

Sekhar Tangirala et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2007)

添加到收藏夹

Article Mechanics

Optimum design of composite laminates for maximum buckling load capacity using simulated annealing

O Erdal et al.

COMPOSITE STRUCTURES (2005)

添加到收藏夹

Article Engineering, Marine

Optimum design of multiple intersecting spheres deep-submerged pressure hull

CC Liang et al.

OCEAN ENGINEERING (2004)

添加到收藏夹

Article Engineering, Civil

SLOCUM: An underwater glider propelled by environmental energy

DC Webb et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2001)

添加到收藏夹

Article Engineering, Civil

The autonomous underwater glider spray

J Sherman et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2001)

添加到收藏夹

Article Engineering, Civil

Seaglider: A long-range autonomous underwater vehicle for oceanographic research

CC Eriksen et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2001)

添加到收藏夹

Article Mechanics

Optimization of fiber reinforced composites

G Duvaut et al.

COMPOSITE STRUCTURES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.