☆ 4.8 Article

Microfluidic Bioreactor with Fibrous Micromixers for In Vitro mRNA Transcription

NANO LETTERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Improvement in mixing efficiency of microfluidic passive mixers functionalized by microstructures created with proton beam lithography

Emad Nady et al.

Summary: This study designed, simulated, and realized various microfluidic passive mixer devices, using microstructures to improve mixing efficiency. By varying the length and areal density of micro walls in a micro wall array, optimal mixing performance was achieved. Fabricated passive micromixers showed excellent mixing efficiency with more densely distributed and longer micro-walls.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Review Medical Laboratory Technology

Development of mRNA manufacturing for vaccines and therapeutics: mRNA platform requirements and development of a scalable production process to support early phase clinical trials

Jill Whitley et al.

Summary: This article introduces an aqueous-based scalable manufacturing process and the accompanying analytical methods for producing mRNA vaccines and therapeutics. It has been shown that this process can be adapted to clinical and commercial scale production, and the resulting products demonstrate good efficacy and protection in animal models. Furthermore, the article discusses the challenges and potential solutions regarding raw material sourcing, supply, and cold chain requirements for mRNA products.

TRANSLATIONAL RESEARCH (2022)

添加到收藏夹

Article Polymer Science

Fabrication of Microfiber-Templated Microfluidic Chips with Microfibrous Channels for High Throughput and Continuous Production of Nanoscale Droplets

Guk-Young Ahn et al.

Summary: In this study, a polydimethylsiloxane (PDMS) microfluidic chip with well-interconnected microfibrous channels was fabricated using electrospun poly(e-caprolactone) (PCL) microfibrous matrix and 3D-printed patterns as templates. The chip, known as microfiber-templated microfluidic chip (MTMC), demonstrated high throughput and continuous production of nanoscale emulsions and spheres by utilizing mechanisms such as cross-junction dripping and Y-junction splitting. The MTMC allows for controlled size ranges of water-in-oil emulsions and polyethylene glycol-diacrylate (PEG-DA) spheres, and can potentially produce 58 trillion PEG-DA nanospheres per hour without high shear force. Additionally, the MTMC showed higher encapsulation efficiency compared to microspheres fabricated by ultrasonication, making it a powerful platform for large-scale and continuous production of emulsions and spheres.

ACS MACRO LETTERS (2022)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Maximizing mRNA vaccine production with Bayesian optimization

Sara Sousa Rosa et al.

Summary: Messenger RNA (mRNA) vaccines play a prominent role in infectious disease control as a new alternative to conventional vaccines. To improve efficiency and reduce costs, optimization of the in vitro transcription (IVT) reaction is necessary. This study utilizes machine learning approaches to optimize the mRNA IVT reaction, resulting in higher yield and shorter production time.

BIOTECHNOLOGY AND BIOENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

Gram-Scale mRNA Production Using a 250-mL Single-Use Bioreactor

Janja Skok et al.

Summary: The COVID-19 pandemic has led to a rapid growth in the development of mRNA vaccines. However, increasing the production yield of mRNA remains a challenge. In this study, the researchers successfully demonstrated the continuous fed-batch production of mRNA using the Ambr (R) 250 Modular bioreactor system, paving the way for continuous manufacturing of mRNA.

CHEMIE INGENIEUR TECHNIK (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of mixing performance in spiral micromixers based on Dean flows and chaotic advection

Ekta Tripathi et al.

Summary: This study proposes three innovative spiral micromixers and investigates their mixing and pressure drop characteristics under different Reynolds numbers. SE and RS micromixers show better mixing performance and higher mixing index compared to the SS micromixer. The width of the mixers has a greater impact on the mixing index than the depth.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Review Immunology

mRNA vaccines manufacturing: Challenges and bottlenecks

Sara Sousa Rosa et al.

Summary: mRNA vaccines are emerging as a new alternative to conventional vaccines, with their precision, safety profile, and flexible manufacturing. They have been used to combat the Covid-19 pandemic and are being studied for other diseases as well. However, challenges in manufacturing, technology platform, and cost-effective production need to be addressed to fully utilize this new vaccination technology.

VACCINE (2021)

添加到收藏夹

Article Chemistry, Analytical

Toward the Next Generation of Passive Micromixers: A Novel 3-D Design Approach

Mahmut Burak Okuducu et al.

Summary: This article presents a novel 3-D passive micromixer design to improve fluid mixing over a short distance. Computational Fluid Dynamics (CFD) simulations are used to investigate the micromixer's performance numerically. The CSFO geometry is found to develop a large interfacial area between fluid bodies, accelerating fluid mixing in vertical and/or horizontal directions.

MICROMACHINES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D microfluidics in PDMS: manufacturing with 3D molding

Tyler Richmond et al.

Summary: This paper presents a method for rapidly designing and fabricating 3D microfluidic systems in PDMS using 3D molding, without the need for photolithography. The process involves designing a microfluidic system in a CAD program, creating a negative mold through 3D printing, and casting PDMS in the mold to create the final device. The study demonstrates the fabrication of complex geometries that are difficult to achieve with traditional soft lithography methods.

MICROFLUIDICS AND NANOFLUIDICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Pharma 4.0 Continuous mRNA Drug Products Manufacturing

Andreas Ouranidis et al.

Summary: Continuous mRNA drug manufacturing aims to improve flow processes, but faces challenges in cost and technical adaptation. This study successfully demonstrates the feasibility of continuous production, optimizing equipment specifications and operational space while identifying key resource-intensive factors.

PHARMACEUTICS (2021)

添加到收藏夹

Review Chemistry, Analytical

A Review of Passive Micromixers with a Comparative Analysis

Wasim Raza et al.

MICROMACHINES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Phase-controlled field-effect micromixing using AC electroosmosis

Paresa Modarres et al.

MICROSYSTEMS & NANOENGINEERING (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Development of an RNA Expression Platform Controlled by Viral Internal Ribosome Entry Sites

Hae Li Ko et al.

JOURNAL OF MICROBIOLOGY AND BIOTECHNOLOGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Simple Surface Modification of Poly(dimethylsiloxane) via Surface Segregating Smart Polymers for Biomicrofluidics

Aslihan Gokaltun et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Chemistry, Analytical

Mixing Performance of a Cost-effective Split-and-Recombine 3D Micromixer Fabricated by Xurographic Method

Ramezan Ali Taheri et al.

MICROMACHINES (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Mixing performance of split-and-recombine micromixer with offset inlets

Afzal Husain et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Microfluidic device for real-time formulation of reagents and their subsequent encapsulation into double emulsions

Jui-Chia Chang et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Chemistry, Analytical

Mixing Enhancement in Serpentine Micromixers with a Non-Rectangular Cross-Section

Joshua Clark et al.

MICROMACHINES (2018)

添加到收藏夹

Article Materials Science, Composites

Effect of high-shear mixing by twin-screw extruder on the dispersion and homogeneity of polyacrylonitrile/carbon nanotube composite solution

Xuejia Yan et al.

POLYMER COMPOSITES (2017)

添加到收藏夹

Review Chemistry, Analytical

A Review on Micromixers

Gaozhe Cai et al.

MICROMACHINES (2017)

添加到收藏夹

Proceedings Paper Thermodynamics

Numerical analysis of flow resistance and heat transfer in the transitional regime of pipe flow with twisted-tape turbulators

R. Rossi et al.

35TH UIT HEAT TRANSFER CONFERENCE (UIT2017) (2017)

添加到收藏夹

Article Energy & Fuels

Intensification of liquid-liquid mass transfer in micromixer assisted by ultrasound irradiation and Fe3O4 nanoparticles

Masoud Rahimi et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D nanomolding and fluid mixing in micromixers with micro-patterned microchannel walls

Bahador Farshchian et al.

NANO CONVERGENCE (2017)

添加到收藏夹

Article Biochemical Research Methods

Design and fabrication of magnetically functionalized flexible micropillar arrays for rapid and controllable microfluidic mixing

Bingpu Zhou et al.

LAB ON A CHIP (2015)

添加到收藏夹

Article Chemistry, Analytical

Comparative Analysis of Passive Micromixers at a Wide Range of Reynolds Numbers

Vladimir Viktorov et al.

MICROMACHINES (2015)

添加到收藏夹

Article Chemistry, Analytical

Passive Micromixers with Interlocking Semi-Circle and Omega-Shaped Modules: Experiments and Simulations

Ala'aldeen Al-Halhouli et al.

MICROMACHINES (2015)

添加到收藏夹

Article Chemistry, Analytical

Optimized Simulation and Validation of Particle Advection in Asymmetric Staggered Herringbone Type Micromixers

Eszter L. Toth et al.

MICROMACHINES (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

The implementation of a thermal bubble actuated microfluidic chip with microvalve, micropump and micromixer

Chenghan Huang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

添加到收藏夹

Article Chemistry, Analytical

Mixing Analysis of Passive Micromixer with Unbalanced Three-Split Rhombic Sub-Channels

Shakhawat Hossain et al.

MICROMACHINES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A pneumatic micromixer facilitating fluid mixing at a wide range flow rate for the preparation of quantum dots

Wang Xin et al.

SCIENCE CHINA-CHEMISTRY (2013)

添加到收藏夹

Review Biochemistry & Molecular Biology

Developing mRNA-vaccine technologies

Thomas Schlake et al.

RNA BIOLOGY (2012)

添加到收藏夹

Article Engineering, Chemical

The Effects of Mixing, Reaction Rates, and Stoichiometry on Yield for Mixing Sensitive Reactions-Part I: Model Development

Syed Imran A. Shah et al.

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2012)

添加到收藏夹

Article Engineering, Environmental

Design and experiments of a short-mixing-length baffled microreactor and its application to microfluidic synthesis of nanoparticles

C. K. Chung et al.

CHEMICAL ENGINEERING JOURNAL (2011)

添加到收藏夹

Article Biochemical Research Methods

Three-dimensionally crossing manifold micro-mixer for fast mixing in a short channel length

Tae Woo Lim et al.

LAB ON A CHIP (2011)

添加到收藏夹

Article Chemistry, Analytical

Integrated micro/nano-fluidic system for mixing and preconcentration of dissolved proteins

Khalid Anwar et al.

MICROCHIMICA ACTA (2011)

添加到收藏夹

Article Engineering, Environmental

Design and simulation of passive mixing in microfluidic systems with geometric variations

Wonjin Jeon et al.

CHEMICAL ENGINEERING JOURNAL (2009)

添加到收藏夹

Article Mechanics

The growth of a mixing layer in a laminar channel

J Jiménez

JOURNAL OF FLUID MECHANICS (2005)

添加到收藏夹

Review Engineering, Electrical & Electronic

Micromixers - a review

NT Nguyen et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)

添加到收藏夹

Article Multidisciplinary Sciences

Systematic investigation of protein phase behavior with a microfluidic formulator

CL Hansen et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.