4.6 Article

Removal of Heavy Metal Ions from Aqueous Solution Using Biotransformed Lignite

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Green & Sustainable Science & Technology

Heavy metal recovery from electroplating effluent using adsorption by jute waste-derived biochar for soil amendment and plant micro-fertilizer

Lata Ramrakhiani et al.

Summary: Effluent from electroplating industries contains toxic heavy metal ions, such as chromium, nickel, lead, cadmium, copper, and zinc. This study focused on recovery of zinc from electroplating effluent using biochar synthesized from jute industrial wastes. The optimal adsorption capacity of 526.32 mg g(-1) was achieved for Zn(II), and the binding mechanisms included ion exchange, complexation, electrostatic interactions, adsorption, and micro-precipitation. Further analysis revealed that the exhausted Zn(II)-laden biochar could be recycled for micro-fertilizer development, leading to improvements in plant growth and soil fertility.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2022)

Article Engineering, Environmental

Synthesis of coal-analcime composite from coal gangue and its adsorption performance on heavy metal ions

Yuxuan Jin et al.

Summary: A novel coal-analcime composite adsorbent was successfully synthesized from coal gangue, enhancing the adsorption capacity of analcime for heavy metal ions. The modified coal loaded on the surface of analcime significantly improved the chemo-adsorption between heavy metal ions and the composite, with a maximum Pb2+ exchange capacity of 268 mg/g achieved.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Multidisciplinary Sciences

Adsorption behaviors and mechanisms of Cu2+, Zn2+ and Pb2+ by magnetically modified lignite

Junzhen Di et al.

Summary: This study aims to solve the problems of limited capacity and difficult recovery in adsorbing Cu2+, Zn2+, and Pb2+ in acid mine wastewater (AMD) by lignite. Magnetically modified lignite (MML) was prepared by chemical co-precipitation method and its adsorption properties were investigated. The results showed that MML had better adsorption effect compared to lignite. The adsorption processes were more in line with the Langmuir model, and the adsorption of heavy metal ions by lignite obeyed the Quasi first-order kinetic model, while the adsorption of MML followed the Quasi second-order kinetic model. The study also revealed the adsorption mechanisms of Cu2+, Zn2+, and Pb2+ by lignite and MML. The experiments demonstrated that the pH, adsorbent dosage, temperature, initial concentration, and contact time had an influence on the adsorption. SEM, XRD, and FTIR tests confirmed the successful loading of Fe3O4 on the surface of lignite during magnetic modification.

SCIENTIFIC REPORTS (2022)

Article Energy & Fuels

Exploring a new way to generate mesopores in lignite by employing steam explosion

Zhenyong Miao et al.

Summary: The use of steam explosion can significantly increase the pore structure of coal, especially enhancing the generation of mesopores. After the SE treatment, the total volumes of pores and micropores in lignite are greatly increased while most of the polar sites in coal can be maintained.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Energy & Fuels

Bacteria solubilization of shenmu lignite: influence of surfactants and characterization of the biosolubilization products

Hongli Kang et al.

Summary: The biosolubilization experiments of Shenmu lignite were conducted using four types of bacteria, with Pseudomonas fluorescens demonstrating the highest coal biosolubilization rate. Addition of Triton X-100 enhanced the biosolubilization efficiency of Pseudomonas fluorescens. The study also revealed that surfactants can alter the surface properties of coal, impacting the biosolubilization process.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Environmental Sciences

Determination of heavy metals in the territory of contaminated areas of Greece and their restoration through hyperaccumulators

Georgios Charvalas et al.

Summary: This article provides an overview of alternative methods for restoring contaminated soils (phytoremediation), focusing on areas of excessive metallurgical activities in Greece. Two case studies in Northern Greece were selected, one characterized by metal mining and a hot summer Mediterranean climate, and the other involving lignite mining and pollution under subtropical climate.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Environmental Sciences

Use of Lignite as a Low-Cost Material for Cadmium and Copper Removal from Aqueous Solutions: Assessment of Adsorption Characteristics and Exploration of Involved Mechanisms

Salah Jellali et al.

Summary: The study found that increasing initial concentrations, adsorbent dosage, and aqueous pH values improved the removal efficiency of Cd and Cu by lignite. Cd showed rapid adsorption kinetics, with pseudo-second order and Freundlich models fitting well for Cd and Cu, respectively.
Article Energy & Fuels

Switching the hydrophobic Neyveli lignite into hydrophilic type by surface modification and its subsequent use for removing Cr(VI)/F- from artificial pollutant

A. Sakthivel et al.

Summary: This study utilized non-wettable brown coal from Neyveli mines, India to effectively remove Cr(VI) after structural modification, converting it into a wettable form with hydrophilic properties. The chemically modified coal samples were successful in removing heavy metals like Cr(VI) from artificial pollutants, with reactivated coal samples also showing potential for removing fluoride ions from pollutants.
Article Environmental Sciences

Interactive assessment of lignite and bamboo-biochar for geochemical speciation, modulation and uptake of Cu and other heavy metals in the copper mine tailing

Mehr Ahmed Mujtaba Munir et al.

Summary: This study investigates the combined effect of bamboo-biochar and water-washed lignite on the concentration of metals in pore water, their bioavailability, and geochemical speciation at copper mine tailings sites. The results show a significant reduction in Cu concentration and increased Pb and Zn concentration after amendments application. Co-application of BC-LGT effectively reduces the bioavailability of Cu and other metals.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Biotechnology & Applied Microbiology

Adsorption behavior and mechanism of Cd (II) by modified coal-based humin

Ping Wang et al.

Summary: The research demonstrates that modification of SCH using Ca(II) can enhance its adsorption capacity for Cd(II). Through a series of characterization and experimental studies, the adsorption kinetics and thermodynamics of SCH and Ca-SCH to Cd(II) were determined, providing valuable insights for further research and application.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Article Environmental Sciences

First Report of Fungal Strains from Afsin-Elbistan Mine for Microbial Lignite Process

Selma Sezen et al.

GEOMICROBIOLOGY JOURNAL (2020)

Article Environmental Sciences

Lignite Biosolubilization by Bacillus sp. RKB 2 and Characterization of its Products

Nuraly Akimbekov et al.

GEOMICROBIOLOGY JOURNAL (2020)

Article Geochemistry & Geophysics

Synthesis of Zeolites from Greek Fly Ash and Assessment of Their Copper Removal Capacity

Aikaterini Vavouraki et al.

MINERALS (2020)

Article Environmental Sciences

Assessment of the human health risks of heavy metals in nine typical areas

Shiyu Wang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Environmental Sciences

Investigating the potential of synthetic humic-like acid to remove metal ions from contaminated water

Ting Yang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2018)

Article Environmental Sciences

Characterization of biochars produced from oil palm and rice husks and their adsorption capacities for heavy metals

A. W. Samsuri et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2014)

Article Chemistry, Applied

Removal of copper from aqueous solutions by low cost adsorbent-Kolubara lignite

Sonja Milicevic et al.

FUEL PROCESSING TECHNOLOGY (2012)

Article Chemistry, Applied

Removal of metal ions from multi-component mixture using natural lignite

Leos Doskocil et al.

FUEL PROCESSING TECHNOLOGY (2012)

Article Energy & Fuels

Characterisation of lignite as an industrial adsorbent

Ying Qi et al.

Article Engineering, Environmental

Adsorption kinetics and equilibrium of copper from aqueous solutions using hazelnut shell activated carbon

E. Demirbas et al.

CHEMICAL ENGINEERING JOURNAL (2009)

Article Engineering, Environmental

Sorption of metal ions on lignite and the derived humic substances

Martina Havelcova et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Environmental Sciences

Effects of a Copper-Resistant Fungus on Copper Adsorption and Chemical Forms in Soils

Aixue Du et al.

WATER AIR AND SOIL POLLUTION (2009)

Article Engineering, Environmental

Equilibrium and kinetic studies of methyl violet sorption by agricultural waste

B. H. Hameed

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Engineering, Chemical

Kinetics and equilibrium studies of heavy metal ions removal by use of natural zeolite

Sevgi Kocaoba et al.

DESALINATION (2007)

Article Chemistry, Applied

Removal of metal ions using lignite in aqueous solution - Low cost biosorbents

E. Pehlivan et al.

FUEL PROCESSING TECHNOLOGY (2007)

Article Engineering, Environmental

Comparison of adsorption capacity of young brown coals and humic acids prepared from different coal mines in Anatolia

E. Pehlivan et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Article Engineering, Environmental

Removal and recovery of metal ions from acid mine drainage using lignite - A low cost sorbent

Dinesh Mohan et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Review Engineering, Environmental

Review of second-order models for adsorption systems

Yuh-Shan Ho

JOURNAL OF HAZARDOUS MATERIALS (2006)

Article Chemistry, Physical

Adsorption characteristics and the kinetics of the Cr(VI) on the Thuja oriantalis

E Oguz

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)

Article Energy & Fuels

Removal of heavy metals from water by lignite-based sorbents

M Jochová et al.

Article Engineering, Chemical

Batch removal of copper(II) and zinc(II) from aqueous solutions with low-rank Turkish coals

S Karabulut et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2000)