4.5 Article

Control of magnetic dissipation and radiation on an unsteady stagnation point nanofluid flow: A numerical approach

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Multidisciplinary

Impact of gold nanoparticles along with Maxwell velocity and Smoluchowski temperature slip boundary conditions on fluid flow: Sutterby model

Tanveer Sajid et al.

Summary: This paper focuses on the rotating Sutterby fluid flow subjected to a slippery expandable sheet and develops a mathematical model to study the heat transfer and mass transfer effects of gold nanoparticles and thermal radiation. The results show that the presence of gold nanoparticles and thermal radiation parameter can enhance the heat transfer rate and mass transfer. The numerical calculations also investigate the influence of various parameters on surface drag coefficient, heat transfer, and mass transfer.

CHINESE JOURNAL OF PHYSICS (2022)

Article Chemistry, Analytical

Activation Energy Impact on Flow of AA7072-AA7075/Water-Based Hybrid Nanofluid through a Cone, Wedge and Plate

Maaliger B. Rekha et al.

Summary: This study investigates the effect of a heat source/sink on the flow of nanofluid through a cone, wedge, and plate. It was found that the heat transfer is improved when the fluid flows past a plate compared to a cone or wedge.

MICROMACHINES (2022)

Article Engineering, Multidisciplinary

Effectiveness of magnetize flow on nanofluid via unsteady natural convection inside an inclined U-shaped cavity with discrete heating

Hossam A. Nabwey et al.

Summary: This study investigates the unsteady MHD free convection flow and heat transfer in an inclined U-shaped cavity filled with Cu-water nanofluid. The effects of various parameters, such as heat source length, Hartmann number, nanoparticle volume fraction, heat source location, and aspect ratio, on the mean heat transfer rate are examined. The results show that the mean heat transfer rate decreases with heat source length and Hartmann number, but increases with heat source location and nanoparticle volume fraction. Furthermore, the mean heat transfer rate increases with aspect ratio.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Dynamics of ternary-hybrid nanofluid subject to magnetic flux density and heat source or sink on a convectively heated surface

I. L. Animasaun et al.

Summary: The size and intensity of the system of delocalized electrons are reflected in the form of the induced magnetic field. However, the significance of different-shaped metal nanoparticles in stagnant water undergoing convective heating is still unclear. Numerical calculations and analysis reveal that an increase in convective heating of the wall can enhance temperature distribution, regardless of whether it is a heat source or heat sink.

SURFACES AND INTERFACES (2022)

Article Thermodynamics

Dissipative heat for the Casson fluid flow past an expanding cylindrical surface

Pradyumna Kumar Pattnaik et al.

Summary: The study focuses on the flow of non-Newtonian Casson fluid past an expanding cylinder in a porous medium. The impact of various parameters such as the magnetic parameter, permeability, and Casson parameter on the flow phenomena were investigated through graphs and numerically simulated results presented in tables. Important observations include the influence of these parameters on shear rate coefficients and fluid temperature.

HEAT TRANSFER (2022)

Article Physics, Multidisciplinary

Tangent hyperbolic non-Newtonian radiative bioconvection nanofluid flow from a bi-directional stretching surface with electro-magneto-hydrodynamic, Joule heating and modified diffusion effects

J. Prakash et al.

Summary: This paper presents a theoretical study of bioconvection flow of a tangential hyperbolic nanofluid under mutually orthogonal electrical and magnetic fields. Various factors, such as thermal radiation, Joule heating, and heat source/sink effects, are considered. The study also implements non-Fourier and non-Fickian models with thermal and solutal relaxation. The results show the effects of different parameters on the flow properties, such as velocity, density of microorganisms, and temperature.

EUROPEAN PHYSICAL JOURNAL PLUS (2022)

Article Mathematics

Impact of Newtonian heating on the conducting Casson fluid flow past a stretching cylinder

Swarnalata Jena et al.

Summary: A mathematical model is developed and analyzed for the flow of Casson fluid past a cylinder in a permeable medium. The novelty of this study lies in considering the permeability of the medium and the effect of a heat source on the flow behavior. The study is particularly important in the field of physiology, where the flow of blood through arteries is of interest. By transforming governing equations and using numerical techniques, the researchers were able to obtain valuable insights into the flow phenomena and provide numerical simulations of rate coefficients.

JOURNAL OF INTERDISCIPLINARY MATHEMATICS (2022)

Article Engineering, Multidisciplinary

Thermal conductivity performance in hybrid (SWCNTs-CuO/Ehylene glycol) nanofluid flow: Dual solutions

Muhammad Yasir et al.

Summary: The research focuses on studying the flow characteristics and heat transfer of a permeable hybrid nanofluid on a stretching/shrinking surface. Numerical simulations show that the hybrid nanofluid exhibits more efficient heat conduction compared to simple nanofluids due to its enhanced thermal properties. The results also indicate that Eckert number does not affect boundary layer separation, while higher values of the suction parameter may influence heat transfer performance.

AIN SHAMS ENGINEERING JOURNAL (2022)

Article Thermodynamics

Mixed convective flow of Ag-H2O magnetic nanofluid over a curved surface with volumetric heat generation and temperature-dependent viscosity

Alok K. Pandey et al.

Summary: This study investigates the impact of magnetic nanofluid flow over a curved surface in the presence of heat and mass mixed convection, considering various parameters and analyzing the effects of heat and mass transfer.

HEAT TRANSFER (2021)

Article Thermodynamics

Analytical estimation of energy dissipations: Viscous, Joulian, and Darcy of viscoelastic fluid flow phenomena over a deformable surface

D. Bhukta et al.

Summary: This paper presents an analytical estimation of energy dissipations in viscoelastic flow over a deformable surface, focusing on the effects on transport processes and various dissipative energies involved.

HEAT TRANSFER (2021)

Article Thermodynamics

Numerical solution for Sisko nanofluid flow through stretching surface in a Darcy-Forchheimer porous medium with thermal radiation

Himanshu Upreti et al.

Summary: This study investigates heat transfer assessments in a Sisko nanofluid flow over a stretching surface in a Darcy-Forchheimer porous medium with heat generation and thermal radiation. The influence of Forchheimer number, porosity, heat generation, radiation, and material parameters on the heat transfer characteristics is examined. It is found that heat transfer function decreases with an increase in Forchheimer number, while the heat transfer characteristics of Sisko nanofluid increase with heat generation and material parameters.

HEAT TRANSFER (2021)

Article Physics, Multidisciplinary

A comparative description on time-dependent rotating magnetic transport of a water base liquid H2O with hybrid nano-materials Al2O3-Cu and Al2O3-TiO2 over an extending sheet using Buongiorno model: Finite element approach

Bagh Ali et al.

Summary: The study investigates the MHD rotational flow of hybrid-nanofluids over a horizontally elongated plane sheet to enhance thermal transportation. Implementing finite element method and various nanofluid models revealed differences in velocity components, temperature, and nanoparticle concentration between Al2O3-Cu and Al2O3-TiO2 hybrid-nanofluids. The effects of physical parameters on skin friction coefficients and heat transfer characteristics were also analyzed.

CHINESE JOURNAL OF PHYSICS (2021)

Article Mathematics, Interdisciplinary Applications

Solar energy aspects of gyrotactic mixed bioconvection flow of nanofluid past a vertical thin moving needle influenced by variable Prandtl number

Ying-Qing Song et al.

Summary: The study focuses on nanofluid flow over a vertical thin needle with gyrotactic microorganisms, considering the presence of a magnetic field in the incompressible electrically conductive liquid. The model includes the effects of thermophoresis and Brownian motion. The results show that increasing magnetic and buoyancy ratio parameters lead to a reduction in velocity gradient, while higher Biot number and radiation parameter enhance heat transfer. The density of motile microorganisms increases with Lewis number and decreases with Peclet number.

CHAOS SOLITONS & FRACTALS (2021)

Article Physics, Multidisciplinary

Radiative swirl motion of hydromagnetic Casson nanofluid flow over rotary cylinder using Joule dissipation impact

Arshad Khan et al.

Summary: This article investigates heat transfer in spinning flow of Casson nanofluid, analyzing flow characteristics under different temperature conditions and the impact of Casson nanofluid. The study reveals that flow characteristics decrease with increasing Reynolds number and magnetic parameter, temperature profiles are affected, and fluid concentration decreases with increasing Prandtl and Lewis numbers.

PHYSICA SCRIPTA (2021)

Article Engineering, Chemical

Finite element investigation of Dufour and Soret impacts on MHD rotating flow of Oldroyd-B nanofluid over a stretching sheet with double diffusion Cattaneo Christov heat flux model

Bagh Ali et al.

Summary: This study investigates the magnetohydrodynamic effects on the transient rotational flow of Oldroyd-B nanofluids, revealing the impact of parameters like magnetic force and Deborah number on flow characteristics and temperature distribution through numerical simulations.

POWDER TECHNOLOGY (2021)

Article Multidisciplinary Sciences

Role of Cattaneo-Christov heat flux in an MHD Micropolar dusty nanofluid flow with zero mass flux condition

Muhammad Ramzan et al.

Summary: This study examines the thermal conductivity of dusty Micropolar nanoliquid with MHD and Cattaneo-Christov heat flux flow over an elongated sheet, considering various factors such as heat source/sink, chemical reaction, and convective heat. Results show that the thermal profile and velocity field increase with higher liquid particle interaction parameter in the case of the dust phase, while the magnetic parameter and Schmidt number also affect the thermal profile and mass transfer rate respectively. Speed slip parameter has an impact on both boundary layer thickness and fluid velocity, while thermal boundary layer thickness decreases with increasing thermal relaxation time in both dust and liquid phases.

SCIENTIFIC REPORTS (2021)

Article Thermodynamics

Irreversibility process characteristics of variant viscosity and conductivity on hybrid nanofluid flow through Poiseuille microchannel: A special case study

Suriya Uma Devi Sathyanarayanan et al.

Summary: The study is based on the flow of hybrid nanofluid within a micro channel, considering the variations in viscosity and thermal conductivity. Through numerical simulations and experimental data, the physical behaviors of flow phenomena and entropy/Bejan number are presented.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Features of entropy optimization on viscous second grade nanofluid streamed with thermal radiation: A Tiwari and Das model

Wasim Jamshed et al.

Summary: This study investigated the heat transfer characteristics of Second grade fluid model in nanofluid flow using a single-phase model. The addition of nanoparticle volume fraction can affect the fluid temperature and entropy values. The heavier density of copper nanoparticles impedes the flow profile while also increasing the fluid temperature.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Physics, Multidisciplinary

Features of 3D magneto-convective nonlinear radiative Williamson nanofluid flow with activation energy, multiple slips and Hall effect

Susmay Nandi et al.

Summary: This article analyzes the impacts of Hall current and Arrhenius activation energy on three-dimensional hydromagnetic flow of Williamson nanofluid past a slendering stretching sheet, considering multiple slips, viscous dissipation, Joule heating, and binary chemical reaction. The study also includes nonlinear thermal radiation and nonlinear mixed convection. The numerical solutions show the sensitivity to controlling parameters and are validated by comparison with previously published results.

PHYSICA SCRIPTA (2021)

Article Physics, Multidisciplinary

Flow and heat transfer investigation of bio-convective hybrid nanofluid with triple stratification effects

Muhammad Naveed Khan et al.

Summary: The study investigated the bio-convective stagnation point flow of hybrid nanofluid using the Cattaneo-Christove theory, viscous dissipation, and activation energy. The addition of nanoparticles in the base liquid was shown to enhance thermal conductivity, leading to improved heat and mass transfer rates. Mathematical modeling and graphical illustrations were utilized to analyze the thermal properties of the hybrid nanofluid.

PHYSICA SCRIPTA (2021)

Article Physics, Applied

Physical impact of thermo-diffusion and diffusion-thermo on Marangoni convective flow of hybrid nanofluid (MnZiFe2O4-NiZnFe2O4-H2O) with nonlinear heat source/sink and radiative heat flux

Ying-Qing Song et al.

Summary: This study investigates the influences of various factors on heat, concentration, and entropy generation in magnetohydrodynamics flow of nanofluids, using numerical analysis. Results indicate a significant impact of thermal gradient on heat transfer, with an increase in Brinkman number and Marangoni ratio leading to higher entropy production. Additionally, an escalation in Marangoni ratio and Dufour number enhances heat transfer rate.

MODERN PHYSICS LETTERS B (2021)

Article Materials Science, Multidisciplinary

Thermal expansion optimization in solar aircraft using tangent hyperbolic hybrid nanofluid: a solar thermal application

Wasim Jamshed et al.

Summary: This study focuses on the thermal efficiency of solar aircraft wings, utilizing hybrid nanofluid to enhance heat transfer efficiency. The results show that hybrid nanofluid is a more ideal heat transfer source compared to traditional nanofluid.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Engineering, Aerospace

Numerical solution of micropolar fluid flow via stretchable surface with chemical reaction and melting heat transfer using Keller-Box method

Khilap Singh et al.

Summary: The main theme of this research is to find numerical results of stagnation point flow of micropolar fluid over a porous stretchable surface accounting for physical effects of internal heat generation/absorption, melting heat transfer and chemical reaction using Keller-Box method. The study shows that heat and mass transfer rate decreases at the fluid-solid interface with increasing stretching parameter, and also decreases with an increasing internal heat source/sink parameter.

PROPULSION AND POWER RESEARCH (2021)

Article Thermodynamics

Unsteady squeezing flow of magnetic hybrid nanofluids within parallel plates and entropy generation

Himanshu Upreti et al.

Summary: The study focuses on the significance of hybrid nanofluids in thermal applications, as well as the relationship between entropy generation and heat transfer. The volume fraction of carbon nanotubes and water-ethylene glycol mixtures affects the thermal conductivity of the fluid.

HEAT TRANSFER (2021)

Article Computer Science, Interdisciplinary Applications

Magneto rotating flow of hybrid nanofluid with entropy generation

M. Ijaz Khan et al.

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2020)

Article Materials Science, Multidisciplinary

3D flow and heat transfer of micropolar fluid suspended with mixture of nanoparticles (Ag-CuO/H2O) driven by an exponentially stretching surface

S. Manjunatha et al.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2020)

Article Engineering, Chemical

Second law analysis of a hybrid nanofluid in tubes equipped with double twisted tape inserts

Mehdi Bahiraei et al.

POWDER TECHNOLOGY (2019)

Article Chemistry, Physical

Stagnation point flow of Maxwell nanofluid over a permeable rotating Chock for disk with heat source/sink

Jawad Ahmed et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Article Thermodynamics

Cu-water and Cu-kerosene micropolar nanofluid flow over a permeable stretching sheet

Deepak Kumar Mohapatra et al.

HEAT TRANSFER-ASIAN RESEARCH (2019)

Article Materials Science, Multidisciplinary

Viscous dissipation effects on unsteady mixed convective stagnation point flow using Tiwari-Das nanofluid model

F. Mabood et al.

RESULTS IN PHYSICS (2017)

Article Materials Science, Multidisciplinary

On squeezed flow of couple stress nanofluid between two parallel plates

Tasawar Hayat et al.

RESULTS IN PHYSICS (2017)

Article Engineering, Multidisciplinary

Boundary layer flow and heat transfer analysis on Cu-water nanofluid flow over a stretching cylinder with slip

Alok Kumar Pandey et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

Article Thermodynamics

Homotopy analysis method for unsteady mixed convective stagnation-point flow of a nanofluid using Tiwari-Das nanofluid model

Saeed Dinarvand et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2016)

Article Engineering, Multidisciplinary

Effect of viscous dissipation and suction/injection on MHD nanofluid flow over a wedge with porous medium and slip

Alok Kumar Pandey et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Article Chemistry, Physical

Nanofluid flow and heat transfer in a rotating system in the presence of a magnetic field

M. Sheikholeslami et al.

JOURNAL OF MOLECULAR LIQUIDS (2014)

Article Thermodynamics

Entropy generation in steady MHD flow due to a rotating porous disk in a nanofluid

M. M. Rashidi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

Boundary layer flow of a nanofluid past a stretching sheet with a convective boundary condition

O. D. Makinde et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)

Article Thermodynamics

Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluids

Raj Kamal Tiwari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)