相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。
Article
Engineering, Mechanical
Xuefeng Li et al.
Summary: This paper proposes a novel bistable energy harvester coupled with a nonlinear elastic boundary to enhance energy harvesting performance. Experimental results show that the proposed structure outperforms its counterparts in terms of power output and operational bandwidth. Furthermore, bifurcation analyses and basin of attraction calculation are conducted to identify the optimal parameters and investigate the influence of initial conditions, providing practical design guidelines for improving the system's performance.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2023)
Article
Engineering, Mechanical
Gianluca Gatti et al.
Summary: A novel nonlinear isolator is proposed in this paper, which outperforms the classical quasi-zero stiffness nonlinear isolator when subjected to large inputs. The response of the isolator to shock excitation is investigated, and a suspension system with a quasi-static force-deflection curve of sigmoidal shape is designed. Simulations show that the proposed four-spring system achieves higher maximum displacement of a suspended mass compared to the classical three-spring nonlinear configuration when the shock amplitude is relatively large.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2023)
Article
Engineering, Mechanical
Kunming Chen et al.
Summary: This paper proposes a bistable energy harvester with an M-shaped buckled beam aiming to achieve high-performance piezoelectric energy harvesting under low excitation. Compared with the original monostable M-shaped beam, the proposed harvester can easily maintain large-amplitude interwell oscillation and offer a wider operation bandwidth in a lower frequency range. Numerical and experimental results show that the acceleration threshold required for interwell oscillation can be decreased by reducing the buckling level in bistable configurations, which provides higher voltage and wider operation bandwidth in sweep frequency excitation. Additionally, the performance of the monostable configuration with a softening behavior is better than that with a hardening behavior.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2023)
Article
Energy & Fuels
Shitong Fang et al.
Summary: This paper proposes an auxetic centrifugal softening impact energy harvester (ASIEH) to achieve high energy output at ultra-low rotational frequencies. The ASIEH consists of a centrifugal softening driving beam that impacts two rigid auxetic piezoelectric beams to generate electric energy during rotation. Experiments show that the ASIEH can increase the peak power by 200.45% compared to the plain centrifugal softening impact energy harvester (PSIEH) at 3.5 Hz. Parametric studies indicate that the ASIEH has higher peak power and bandwidth than the PSIEH, making it a promising solution for ultra-low-frequency rotational energy harvesting.
Article
Engineering, Multidisciplinary
Masoud Rezaei et al.
Summary: Tri-stable magneto-piezoelastic oscillators show superior performance in terms of resonance frequency and excitation threshold compared to linear and bi-stable systems. By investigating the potential of these oscillators for simultaneous vibration suppression and energy harvesting, this study introduces a tri-stable magnetopiezoelastic absorber. The absorber, utilizing magnetic elements, demonstrates nonlinear restoring forces and is effective in various excitation scenarios.
APPLIED MATHEMATICAL MODELLING
(2022)
Article
Acoustics
Bo Yan et al.
Summary: This study presents a lever-type quasi-zero stiffness vibration isolator (L-QZS-VI) to improve vibration isolation performance. The lever ratio, tip mass of the lever, and nonlinear stiffness of the magnetic spring are analyzed for their effects on the performance. Experimental results show that the vibration isolation performance can be greatly improved by adjusting these parameters.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Engineering, Mechanical
Kan Ye et al.
Summary: In this study, an origami-inspired vibration isolator with quasi-zero-stiffness (QZS) property is proposed using a truss-spring based stack Miura-ori (TS-SMO) structure. The unique structure uses coil spring sets to replace deformable creases, improving physical realization in engineering applications. Nonlinear force response and QZS feature are achieved through geometric nonlinearity and specific Poisson's ratio profile, with isolation performance discussed under variable viscous damping effects.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Xingjian Jing et al.
Summary: This article presents an efficient method for stiffness manipulation using a flexible and compact X-shaped structure. The inherent nonlinearity of such structures can be completely controlled and predicted through mathematical modeling. The advantages of the X-shaped structure allow for easy in-situ adjustability in practical mechanical designs. This approach offers simplicity, efficiency, and low-cost part production, making it a revolutionary or upgrading technology for existing engineering systems.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Acoustics
Yong Song et al.
Summary: The study established a multi-degree-of-freedom vibration isolation platform model, revealing the nonlinear behaviors and resonant phenomena of the system through numerical calculations and analysis. The quasi-periodic motion characteristics were highlighted as predictors of periodic steady-state responses, while the discussion on system energy changes at specific frequencies provides important insights for engineering applications.
JOURNAL OF VIBRATION AND CONTROL
(2022)
Article
Engineering, Mechanical
Rong-Biao Hao et al.
Summary: An orthogonal six-DOFs vibration isolation system with tunable high-static-low-dynamic stiffness characteristics is studied using experimental and analytical methods. The results show that the isolation frequency range is widened with increasing controlled current, and increasing the electromagnetic coefficient and decreasing the onset distance can decrease the isolation start frequency.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2022)
Article
Engineering, Mechanical
Yuyang Chai et al.
Summary: A novel spring arrangement based on the X-shaped anti-vibration structure with tunable contact mechanism (NXSC) is proposed to explore much better low-frequency vibration isolation performance. The proposed NXSC structure is adjustable to different loading requirements and resonant frequencies, and excellent vibration isolation performance can be achieved readily by tuning the contact parameter.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2022)
Article
Engineering, Mechanical
Shitong Fang et al.
Summary: Multistability, the phenomenon of multiple coexistent stable states, has been found in various scientific areas and researchers have identified numerous benefits of it for a wide range of applications. The unique characteristics of multistability, such as rich potential structure and alleviation of input energy, may play different advantageous roles depending on their applications.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Dongmei Huang et al.
Summary: This paper explores the stochastic and deterministic dynamical properties of an asymmetric quad-stable energy harvester to improve energy harvesting performance. The study finds a multi-valued phenomenon in the harvester and discusses the influence of potential well depth on oscillations. It is also discovered that noise can induce the harvester to transition from period motions to chaotic motions.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Lin-Chuan Zhao et al.
Summary: This study proposes a novel dynamically synergistic regulation mechanism for rotation energy harvesting in order to achieve sustainable energy supply for wireless sensor networks. Through experiments and simulations, the effectiveness and efficiency of this mechanism are verified. This research is of great significance for improving the comprehensive performance of rotation energy harvesters.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Yuyang Chai et al.
Summary: A novel 3-degree-of-freedom anti-vibration unit based on an X-shaped mechanism is proposed in this study, which can achieve low-frequency vibration isolation in three directions simultaneously. The unit exhibits beneficial nonlinear stiffness and damping characteristics, and can passively achieve excellent and tunable vibration isolation performance in all three directions.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Guobiao Hu et al.
Summary: This paper presents a rigorous analytical solution to the dynamics of a single-degree-of-freedom piezoelectric energy harvester under combined wind and base excitations using the harmonic balance method. An equivalent circuit model is established to verify the analytical solution, and the power limit of the harvester under combined excitations is analyzed using impedance theory based on a simplified model. The impedance plots obtained from resistance sweeping indicate that impedance matching is not the condition to attain the power limit of the harvester under combined excitations.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Multidisciplinary Sciences
Xin Li et al.
Summary: This paper reviews the existing frequency up-conversion techniques for enhancing energy harvesting from low-frequency vibration sources. The methods are classified into impact-based, plucking-based, and snap-through-based approaches according to their working mechanisms. This overview will guide the better design of future kinetic energy harvesting systems.
Article
Engineering, Mechanical
Youzuo Jin et al.
Summary: This article proposes an apparatus for simultaneous vibration suppression and energy harvesting by placing the damper between the absorber mass and the base. The developed apparatus, consisting of a variant nonlinear energy sink and an electromagnetic energy harvester, exhibits typical characteristics of nonlinear vibration absorbers and shows a best trade-off between vibration suppression and energy harvesting under specific conditions.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Dingxin Leng et al.
Summary: This paper proposes a semi-active X-shaped vibration isolation system with magnetorheological elastomer (MRE) based on its field-controlled variable properties. The system demonstrates the ability to tune its stiffness for effective vibration mitigation in random low-frequency excitations. The theoretical modeling, static analysis, and dynamic equation of the proposed system are presented. The study investigates the influence of key geometrical parameters and field strength on system characteristics and presents tunable frequency-shift properties. Experimental results show a reduction of 22.5% in the displacement of the isolated objective under single frequency harmonic excitations with a field strength of 0.7 T. Furthermore, under double-tone external loading, the semi-active control reduces the displacements of the excited and isolated objectives by 63.95% and 18.77% respectively compared to the passive-off state. The proposed MRE-based XSVI system demonstrates outstanding isolation performances compared to other systems.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Mathematics, Applied
Xingjian Jing
Summary: Nonlinearity plays an important role in engineering systems and cannot be ignored in structural design, dynamic response analysis, and parameter selection. This paper presents a cutting-edge method named the X-structure/mechanism approach, inspired by animal leg/limb skeletons, which can provide adjustable and beneficial nonlinear properties in stiffness, damping, and inertia. The method is flexible, easy to implement, and has potential applications in various fields such as vibration control, energy harvesting, and robotic technology.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
(2022)
Review
Mathematics, Applied
Bo Yan et al.
Summary: This article discusses the application of nonlinear vibration isolation technology in protecting host structures from harmful vibrations. Among them, the three-spring configured quasi-zero-stiffness (QZS) vibration isolator is the most widely studied object, which has negative stiffness and high-static-low-dynamic stiffness characteristics. This review also explores the basic theory, design methodology, nonlinear damping mechanism, and active control of electromagnetic QZS vibration isolators.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
(2022)
Review
Mathematics, Applied
Kai Wang et al.
Summary: This review provides an overview of the research on low-frequency band gaps in metamaterials. It categorizes and details different methods for achieving low-frequency band gaps, summarizes various strategies for tuning them, and briefly lists potential applications of this type of metamaterial.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
(2022)
Article
Mathematics, Applied
Xiaoye Mao et al.
Summary: This paper reviews existing quasi-zero stiffness (QZS) isolators and proposes a novel X-shape QZS isolator combined with the cam-roller-spring mechanism (CRSM). The proposed isolator combines the advantages of oblique springs to enhance negative stiffness and the CRSM to eliminate gravity of the loading mass. It has the lowest beginning isolation frequency and the smallest maximum displacement transmissibility. However, it still has some disadvantages similar to existing QZS isolators.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
(2022)
Article
Engineering, Mechanical
Shihua Zhou et al.
Summary: A bio-inspired embedded X-shaped vibration isolation (BIE-XVI) structure is proposed in this paper to improve the performance of passive vibration isolation system. By considering muscle/tendon contractile functions, joint rotational friction and connecting rod mass, the structure provides better vibration isolation properties. The effects of key parameters on frequency response characteristics and vibration isolation range are thoroughly analyzed, and the structure can achieve quasi-zero-stiffness property for vibration isolation.
NONLINEAR DYNAMICS
(2022)
Article
Engineering, Mechanical
Gianluca Gatti
Summary: This paper introduces an adjustable device using nonlinear stiffness elements to improve the dynamic performance of vibration energy harvesters, vibration isolators, and vibration absorbers. The device can be modified to achieve specific nonlinear force-displacement characteristics by changing its geometric arrangement, and it can adapt to various engineering applications.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Mu-Qing Niu et al.
Summary: This paper proposes a novel bio-inspired isolator with a compliant limb-like structure. The compliant mechanism is used for both the geometric constrained movement and the storage of elastic energy. A systematic investigation is performed on the high-static-low-dynamic-stiffness characteristic and the vibration isolation performance of the proposed isolator.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Mechanical
Xiaoqiang Chong et al.
Summary: A nonlinear X-combined structure is proposed to improve vibration isolation characteristics by avoiding negative stiffness and unstable factors. The structure uses an X-shaped mechanism and inclined springs to achieve high-static and low-dynamic stiffness. The combination of two nonlinear mechanisms is investigated to evaluate the vibration isolation performance. The results show that the proposed structure has positive/quasi-zero/zero stiffness over the entire working range, with better vibration isolation performance compared to existing nonlinear isolators.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Multidisciplinary
Ze-Qi Lu et al.
Summary: An electromagnetic Stewart platform with high static and low dynamic stiffness is explored to reduce vibration in six degrees of freedom (6-DOFs) and harvest energy simultaneously. The use of stiffness nonlinearity improves vibration isolation efficiency, leading to lower frequencies for vibration isolation and considerable power output. Analytical and numerical results both support the extension of vibration isolation frequency band and reduced vibration transmissibility with increased energy harvesting.
APPLIED MATHEMATICAL MODELLING
(2021)
Article
Engineering, Multidisciplinary
Chaoran Liu et al.
Summary: A novel energy harvesting device is proposed in this paper, based on vibration localization to reduce the force transmitted to the base, achieving simultaneous energy harvesting and vibration isolation. The device consists of a quasi-zero stiffness support and piezoelectric cantilever beams, allowing for flexible enhancement of energy harvesting performance by adjusting key parameters.
APPLIED MATHEMATICAL MODELLING
(2021)
Article
Mathematics, Applied
Gianluca Gatti
Summary: This paper presents a strategy for optimizing a nonlinear elastic mechanical system to increase elastic potential energy compared to a linear counterpart. Theoretical insights and asymptotic trends for optimum parameter selection are provided to aid in design. A prototype device is assembled and tested to demonstrate the theoretical discussions.
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION
(2021)
Article
Thermodynamics
Chaoran Liu et al.
Summary: A novel quasi-zero-stiffness (QZS) device is proposed for vibration isolation and energy harvesting by converting vibrational energy into electrical energy and reducing energy transmitted to the vibration receiver. Experimental results demonstrate the device's advantages of low isolation frequency and high energy output.
Article
Engineering, Mechanical
Shitong Fang et al.
Summary: This paper proposes a tuned bistable nonlinear energy sink (TBNES) to simultaneously improve vibration suppression and energy harvesting performance, as well as extend the operating amplitude range to low-level excitations. Through optimization of system parameters, TBNES outperforms the typical bistable nonlinear energy sink (BNES) in both vibration suppression and energy harvesting.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2021)
Review
Mechanics
Ge Yan et al.
Summary: This review provides an overview of recent studies on bio-inspired vibration isolators, categorizing key isolation mechanisms and performance characteristics to guide the design of new bio-inspired isolators for improved vibration isolation performance.
APPLIED MECHANICS REVIEWS
(2021)
Article
Engineering, Mechanical
Jingyu Zhang et al.
Summary: This paper investigates a novel electromagnetic bistable vibration energy harvester with an elastic boundary, BEH_EB, which shows enhanced performance compared to the counterpart BEH without an elastic boundary. The elastic boundary reduces the depth of the potential energy well, making the BEH_EB easier to achieve large-amplitude inter-well responses. The occurrence probability of favorable inter-well responses in the low-frequency band can reach 100% at 2 and 3 Hz.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Engineering, Mechanical
Ke-Fan Xu et al.
Summary: The study integrates giant magnetostrictive material (GMM) into a nonlinear energy sink (NES) to create a device for vibration control and energy harvesting, and experimentally demonstrates its effectiveness in a scaled model of a whole-spacecraft system. The research also develops analytical methods to investigate the vibration reduction and energy harvesting capabilities of the NES-GMM device, with experimental and theoretical results showing promising outcomes.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Engineering, Mechanical
Chengyun Zhang et al.
Summary: The study investigates the vibration response of wake galloping piezoelectric energy harvesters in different configurations, finding significant impacts of parameters such as upstream obstacle cross-section, equivalent diameter ratio, distance between objects' centers, and velocity span. Machine learning models were trained to predict voltage and maximum displacement values, with gradient boosting regression trees performing optimally in predictions within the test range of parameters.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Engineering, Marine
Shanghao Gu et al.
Summary: This study investigates the vortex-induced vibrations of a pair of circular cylinders with identical diameters in tandem and staggered configurations. Machine learning models were trained to predict the amplitudes of the cylinders, with the GBRT model performing optimally. The GBRT model accurately predicts the amplitudes within the test range of key parameters.
Article
Engineering, Mechanical
Kan Ye et al.
Summary: The integrated translational-rotational QZS vibration isolator designed in this paper using the cam-roller mechanism can provide high-static-low-dynamic stiffness in two directions simultaneously, with independent excitations in translational and rotational directions but mutual interaction. The proposed QZS system shows better isolation performance in both translational and rotational directions compared to the linear system without the cam-roller mechanism.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Chemistry, Physical
Kangqi Fan et al.
Summary: The rotational intermittent-contact TENG (IC-TENG) utilizes a slideable rope-driven rotor to efficiently exploit low-frequency vibration energy, achieving high electric stability through the constantly replenished tribo-charges from intermittent sliding contacts.
Review
Engineering, Civil
Nan Wu et al.
Summary: Efficient electrical energy generation is a key topic in engineering research, and this study reviews piezoelectric energy harvesting techniques from a structural design perspective. By increasing the operation frequency and strain level of piezoelectric materials, significant enhancement in power generation can be achieved. Novel ideas and methodologies for high-power piezoelectric harvesters are discussed, showing the potential for higher energy harvesting efficiency in the future.
ENGINEERING STRUCTURES
(2021)
Article
Engineering, Mechanical
Kai Wang et al.
Summary: This paper introduces a novel QZS-TENG by combining a quasi-zero-stiffness mechanism and a triboelectric nanogenerator. The QZS system with a negative stiffness mechanism achieves ultra-low stiffness in a larger displacement region, leading to excellent energy harvesting performance in the ultra-low frequency region. The study provides a new application of a QZS mechanism for harvesting ultralow-frequency vibration energy by integrating with a TENG.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Thermodynamics
Bin Bao et al.
Summary: The proposed structure demonstrated positive coupling effects between internal resonance and nonlinearity, resulting in a three times wider internal resonance bandwidth for energy harvesting in the x-direction compared to traditional systems. Additionally, the structure achieved an additional internal resonant frequency range (3.4 Hz-4.3 Hz) for enhancing energy harvesting performance in the z-direction. Experimental results showed a maximum power output of 0.64 mW at 7.5 Hz in the investigated frequency domain.
ENERGY CONVERSION AND MANAGEMENT
(2021)
Article
Engineering, Mechanical
Zhaoyu Li et al.
Summary: This article evaluates a piezoelectric energy harvester integrated with Nonlinear Energy Sink (NES) technique, coupled with a pure resistive load and standard rectifying circuit. Theoretical analysis is conducted using Equivalent Impedance Method (EIM) and Harmonic Balance Method (HBM), with circuit simulation validation using Equivalent Circuit Model (ECM). Experimentation confirms the conclusions drawn from theoretical and numerical studies.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Acoustics
Gianluca Gatti
Summary: This paper discusses the fundamental characteristics of a suspension system with four linear springs arranged in an X-shaped configuration, focusing on the influence of softening spring geometry on system behavior, and studying the static and dynamic performance. A simple expression linking damping with excitation amplitude is determined to achieve the lowest possible resonance frequency.
SHOCK AND VIBRATION
(2021)
Article
Engineering, Aerospace
Xin Wang et al.
Article
Instruments & Instrumentation
Kai Yang et al.
SMART MATERIALS AND STRUCTURES
(2020)
Article
Engineering, Mechanical
Chaoran Liu et al.
NONLINEAR DYNAMICS
(2020)
Article
Engineering, Mechanical
Honghua Dai et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2020)
Article
Engineering, Mechanical
Jing Bian et al.
NONLINEAR DYNAMICS
(2020)
Article
Acoustics
Yunhua Zhao et al.
JOURNAL OF SOUND AND VIBRATION
(2020)
Article
Engineering, Mechanical
Ming Chu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2020)
Article
Engineering, Mechanical
Tianchang Deng et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2020)
Article
Engineering, Mechanical
Yu Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2019)
Article
Materials Science, Multidisciplinary
Dongxing Cao et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
(2019)
Article
Mechanics
Tao Yang et al.
JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT
(2019)
Article
Acoustics
Gi Woo Kim et al.
Review
Mechanics
Diego Francisco Ledezma-Ramirez et al.
APPLIED MECHANICS REVIEWS
(2019)
Article
Energy & Fuels
Farid Ullah Khan et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2019)
Article
Materials Science, Multidisciplinary
Uchenna Diala et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
(2019)
Article
Engineering, Multidisciplinary
Zhang YeWei et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES
(2019)
Article
Engineering, Civil
Xingjian Jing et al.
ENGINEERING STRUCTURES
(2019)
Article
Acoustics
Shitong Fang et al.
JOURNAL OF SOUND AND VIBRATION
(2019)
Review
Energy & Fuels
Hong-Xiang Zou et al.
Article
Engineering, Mechanical
Yu Wang et al.
NONLINEAR DYNAMICS
(2019)
Article
Robotics
Josep Virgili-Llop et al.
FRONTIERS IN ROBOTICS AND AI
(2019)
Article
Engineering, Mechanical
Honghua Dai et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2018)
Article
Engineering, Mechanical
Honghua Dai et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2018)
Article
Engineering, Mechanical
Kai Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2017)
Article
Acoustics
M. J. Brennan et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME
(2017)
Article
Acoustics
Guobiao Hu et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME
(2017)
Article
Acoustics
Zhijing Wu et al.
JOURNAL OF SOUND AND VIBRATION
(2016)
Article
Engineering, Mechanical
Chunchuan Liu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2016)
Article
Engineering, Mechanical
Xiuting Sun et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2016)
Article
Engineering, Mechanical
Xiuting Sun et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2016)
Article
Engineering, Electrical & Electronic
Seong-Cheol Kwon et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2016)
Article
Physics, Multidisciplinary
D. Tan et al.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS
(2015)
Article
Acoustics
Jiaxi Zhou et al.
JOURNAL OF SOUND AND VIBRATION
(2015)
Article
Engineering, Multidisciplinary
Zhijing Wu et al.
BIOINSPIRATION & BIOMIMETICS
(2015)
Article
Acoustics
Xiuting Sun et al.
JOURNAL OF SOUND AND VIBRATION
(2014)
Article
Engineering, Electrical & Electronic
Guang Yang et al.
IEEE JOURNAL ON EMERGING AND SELECTED TOPICS IN CIRCUITS AND SYSTEMS
(2014)
Article
Acoustics
Daolin Xu et al.
JOURNAL OF SOUND AND VIBRATION
(2013)
Article
Acoustics
A. D. Shaw et al.
JOURNAL OF SOUND AND VIBRATION
(2013)
Article
Instruments & Instrumentation
A. Erturk et al.
SMART MATERIALS AND STRUCTURES
(2009)
Review
Acoustics
R. A. Ibrahim
JOURNAL OF SOUND AND VIBRATION
(2008)
Article
Engineering, Aerospace
Andrew M. Long et al.
JOURNAL OF SPACECRAFT AND ROCKETS
(2007)
