☆ 4.7 Article

Vibration characteristics analysis of flexible helical gear system with multi-tooth spalling fault: Simulation and experimental study

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Vibration characteristics of rotor-bearing system with angular misalignment and cage fracture: Simulation and experiment

Pengfei Wang et al.

Summary: This paper studies the vibration characteristics of cage fracture faults in rolling bearings from both simulation and experimental aspects. It finds that when cage fracture occurs, the system amplitude increases and obvious impact vibration characteristics appear, and the vibration energy gradually concentrates to low-frequency vibration. These results provide important reference for the identification and diagnosis of rolling bearing misalignment and cage fracture.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of static and dynamic misalignment of rolling bearing on nonlinear vibration characteristics of rotor system

Peng-fei Wang et al.

Summary: In this study, a five-degree of freedom nonlinear force model considering bearing misalignment is proposed, and the effects of misalignment on the dynamic contact characteristics of bearing and the vibration characteristics of the rotor system are analyzed. Evaluation indexes for bearing misalignment are given based on the dynamic response. The research provides valuable insights for fault identification of the rotor-bearing system.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2023)

添加到收藏夹

Article Engineering, Mechanical

A new analytical model for evaluating the time-varying mesh stiffness of helical gears in healthy and spalling cases

Xiao Wu et al.

Summary: Accurately evaluating the time-varying mesh stiffness (TVMS) of helical gears with tooth spalls with curved-bottom features is crucial for gear vibration dynamic simulation. The proposed method in this paper corrects foundation stiffness errors and considers the influence of axial mesh forces, showing effectiveness in modeling tooth spalls with curved-bottom features for helical gears.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of spalling fault on dynamic responses of gear system considering three-dimensional line contact elasto-hydrodynamic lubrication

Liming Wang et al.

Summary: Spalling fault is a common issue in gear systems, causing performance degradation and increased downtime risk. Previous studies focused on the mechanism and effects of spalling fault on dynamic characteristics, neglecting the influence on lubrication characteristics. In this paper, a new dynamic modelling method considering 3D line contact elasto-hydrodynamic lubrication is proposed to study the contact characteristics and dynamic responses affected by spalling fault.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Mathematics

Effect of a Novel Tooth Pitting Model on Mesh Stiffness and Vibration Response of Spur Gears

Jingyu Hou et al.

Summary: This study investigates a new pitting model for predicting fluctuation in mesh stiffness, providing dynamic characteristics, and supporting gear condition monitoring and fault diagnosis.

MATHEMATICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic characteristic of spur gear system with spalling fault considering tooth pitch error

Lantao Yang et al.

Summary: This study focuses on the dynamic characteristics of gear faults to improve the accuracy of fault diagnosis methods, proposing a dynamic modeling method considering the combined effect of pitch error and spalling fault. The simulation results show that vibration characteristics caused by early spalling faults are easily affected by pitch errors.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Contact Characteristics Analysis of Deep Groove Ball Bearings Under Combined Angular Misalignments and External Loads

Hongyang Xu et al.

Summary: The paper investigates the issue of angular misalignments in the installation process of deep groove ball bearings. It develops a quasi-static model to analyze the contact characteristics of the bearings and reveals the significant influence of misalignment angles and loads on the performance of the bearings.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of three types of bearing misalignments on dynamic characteristics of planetary gear set-rotor system

Pengfei Wang et al.

Summary: This paper analyzes the effects of axial, radial, and tilt misalignments on the dynamic characteristics of the planetary gear set-rotor system. It proposes a nonlinear restoring force model for ball bearings under different misalignment conditions. The dynamic model of the planetary gear set is established using the lumped parameter method, and the rotor is modeled using the Timoshenko beam element. The results show that misalignments reduce vibration amplitude but increase load-bearing area and contact load. Different types of misalignments also affect the varying compliance frequency amplitude of the bearing. The research provides a theoretical basis for fault diagnosis and identification of bearing misalignment in complex rotating machinery systems.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Analysis of axial and overturning ultimate load-bearing capacities of deep groove ball bearings under combined loads and arbitrary rotation speed

Hongyang Xu et al.

Summary: This article proposes a method for calculating the axial and overturning ultimate load-bearing capacities of deep groove ball bearings based on the quasi-static model. The method uses a Newton-Raphson method with an analytical Jacobian matrix, which reduces the difficulty of selecting initial values. The accuracy of the proposed method is verified through comparison with traditional methods, and the effects of factors such as radial force, bearing geometric parameters, and rotation speed on the ultimate load-bearing capacities are discussed.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear dynamic modeling and analysis of spur gear based on gear compatibility conditions

Haonan Li et al.

Summary: This paper proposes a new dynamic model with a more realistic dynamic mesh force based on gear compatibility conditions, applicable to gear systems with or without tooth modification and verified by the finite element method. Compared to the traditional model, the proposed model shows higher vibration amplitudes and dynamic mesh forces at most speeds, especially in the bifurcation, quasi-periodic, and chaotic regions.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

A new dynamic model of light-weight spur gear transmission system considering the elasticity of the shaft and gear body

Xianlei Guan et al.

Summary: A dynamic model of a light-weight spur gear transmission system (SGTS) is established to study the influence of the elasticity of the gear body on its dynamic characteristics. The results show that the elasticity of the gear body can reduce vibration intensity.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic characteristics of ball bearing-coupling-rotor system with angular misalignment fault

Pengfei Wang et al.

Summary: The rotor misalignment fault is a common fault in rotating machinery systems, which has a significant impact on the dynamic characteristics of the system, especially in the low-speed range. Bearing misalignment should not be ignored and needs to be considered in modeling. Misalignment causes periodic changes in bearing contact angle, radial clearance, and ball rotational speed, as well as increasing the critical speed and axial vibration of the system.

NONLINEAR DYNAMICS (2022)

添加到收藏夹

Article Engineering, Marine

Investigation on crack failure of helical gear system of the gearbox in wind turbine: Mesh stiffness calculation and vibration characteristics recognition

Siyu Wang et al.

Summary: In this study, an improved model is proposed to calculate the mesh stiffness of a helical gear system with cracks, and a dynamic model is established to analyze the vibration response. The results show that cracks can cause a reduction in mesh stiffness and that more severe cracks result in a higher amplitude and more abundant side frequency components in the vibration response.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear dynamic analysis of high-speed gear pair with wear fault and tooth contact temperature for a wind turbine gearbox

Xu Zhang et al.

Summary: This paper investigates the relationship between high-speed gear wear and nonlinear dynamics in a wind turbine gearbox, taking into account tooth contact temperature. The study shows that tooth contact temperature affects the dynamics of the system and increases the extent of gear wear. This research provides a basis for the diagnosis and detection of gear transmission system failures.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

Traveling wave resonance analysis of flexible spur gear system with angular misalignment

Zimeng Liu et al.

Summary: This paper mainly discusses the traveling wave resonance phenomenon of the aero-engine angular misalignment thin rim spur gear system and simulates its dynamic characteristics. The study found that angular misalignment can lead to traveling wave resonance in the gear system, affecting the amplitude and resonance speed.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Vibration characteristics of bearing-rotor systems with inner ring dynamic misalignment

Hongyang Xu et al.

Summary: This study proposes a novel dynamic model of the bearing-rotor system, considering the inner ring dynamic misalignment and incorporating nonlinearity and axial restraint. The accuracy of the model is verified through experimentation, and the effects of misalignment angle, radial clearance, and rotational speed on system dynamic characteristics are analyzed.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of supporting stiffness of deep groove ball bearings with raceway misalignment on vibration behaviors of a gear-rotor system

Hongyang Xu et al.

Summary: The study focused on the impact of raceway misalignment of deep groove ball bearings on the supporting stiffness and vibration behavior of transmission systems, revealing that raceway misalignment enhances the coupling characteristics of bearing stiffness and exacerbates axial vibration of the system.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

A method for calculating radial time-varying stiffness of flexible cylindrical roller bearings with localized defects

Hongyang Xu et al.

Summary: This paper investigates a method for calculating the radial time-varying stiffness of flexible cylindrical roller bearings with localized defects, which utilizes finite element method and analytical contact theory. The proposed method shows higher calculation accuracy and improved computational efficiency compared to classical methods and finite element method. Results indicate that increasing the angle of defect width leads to a gradual increase in stiffness saltation.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A new mesh stiffness model for modified spur gears with coupling tooth and body flexibility effects

Chongyang Xie et al.

Summary: Mesh stiffness calculation is crucial for gear dynamic analysis, and the influence of gear body flexibility and tooth profile error poses a challenge in modeling. A new mesh stiffness model is proposed in this paper to address this issue, which considers both gear body coupling flexibility and the impact of tooth profile error, validated by the finite element method.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Acoustics

A flexible-helical-geared rotor dynamic model based on hybrid beam-shell elements

Yifan Huangfu et al.

Summary: A dynamic model for thin-rimmed helical gears is established considering flexibility of gear foundations and rotational effects, using Timoshenko beam elements and Mindlin-Reissner shell elements. The model is verified through comparison with experimental results and discusses the effects of various factors on dynamic behaviors. The results show differences between traditional and proposed models, emphasizing the importance of flexible body modeling.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Transmission error investigation of gearbox using rigid-flexible coupling dynamic model: Theoretical analysis and experiments

Tiantang Duan et al.

Summary: In this study, a system-level investigation of gearbox transmission error (TE) was conducted by proposing a rigid-flexible coupling dynamic model. The results showed that TE increases with load, but decreases when considering housing flexibility. Properly decreasing the stiffness of the housing and increasing the inner radius of the hollow shaft can reduce system TE.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Chemistry, Physical

Fault Feature Analysis of Gear Tooth Spalling Based on Dynamic Simulation and Experiments

Zhiguo Wan et al.

Summary: The study analyzed gear dynamics using time-varying meshing stiffness, established a bearing statics model and lateral-torsion coupling vibration model of the gear shaft, analyzed the influence of spalling on TMS using the potential energy method, and studied the fault feature of tooth spalling.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

An improved model for meshing characteristics analysis of spur gears considering fractal surface contact and friction

Zhifang Zhao et al.

Summary: The establishment of a fractal contact model for gear pair contact allows for the calculation of contact stiffness and compliance. Numerical simulation results show that contact stiffness increases with fractal dimension, while factors such as changes in fractal parameter and friction coefficient affect mesh characteristics.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Mechanical

A novel tooth surface modification methodology for wide-faced double-helical gear pairs

Bing Yuan et al.

Summary: A novel tooth surface modification methodology was developed to improve meshing quality and reduce vibration in wide-faced double-helical gear pairs. By establishing a multi-point contact analysis model and a multi-objective optimization mathematical model, optimal tooth surface parameters were determined to enhance system performance.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental measurement and finite element simulation of elastic-body vibration in planetary gears

Tristan M. Ericson et al.

Summary: Modal vibration experiments and finite element modeling demonstrate elastic-body continuum vibration in planetary gear components at operational frequencies. Experimental results agree well with established analytical models.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Mechanical

An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth

Zaigang Chen et al.

Summary: This study investigates the impact of gear tooth profile deviations on gear transmissions and how to accurately calculate gear mesh forces. A dynamic model for spur gears considering detailed deformations of individual teeth is proposed, validated, and optimized. Comparison with traditional models offers theoretical guidance for selecting gear dynamic models.

NONLINEAR DYNAMICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study

Yifan Huangfu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Engineering, Mechanical

An efficient three-dimensional dynamic contact model for cylindrical gear pairs with distributed tooth flank errors

Bing Yuan et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Mechanical

Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations

Zaigang Chen et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Mechanical

Dynamic model and load sharing performance of planetary gear system with journal bearing

Chunpeng Zhang et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamic Characteristics of a Gear System with Double-Teeth Spalling Fault and Its Fault Feature Analysis

Luojie Shi et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Mechanical

A shape-independent approach to modelling gear tooth spalls for time varying mesh stiffness evaluation of a spur gear pair

Yang Luo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths

Kangkang Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Aerospace

Rubbing dynamic characteristics of the blisk-casing system with elastic supports

Jin Zeng et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Acoustics

Modular hybrid models to simulate the static and dynamic behaviour of high-speed thin-rimmed gears

B. Guilbert et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Engineering, Mechanical

Rubbing response comparisons between single blade and flexible ring using different rubbing force models

Jin Zeng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

A study of nonlinear excitation modeling of helical gears with Modification: Theoretical analysis and experiments

Jing Wei et al.

MECHANISM AND MACHINE THEORY (2018)

添加到收藏夹

Article Engineering, Mechanical

Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect

Chongyang Xie et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Time-varying mesh stiffness calculation of spur gears with spalling defect

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Mechanical

Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects

Ankur Saxena et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Mechanical

The influence of tooth pitting on the mesh stiffness of a pair of external spur gears

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2016)

添加到收藏夹

Article Engineering, Mechanical

A study of the efficiency of spur gears made of powder metallurgy materials - ground versus super-finished surfaces

Xinmin Li et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Review Engineering, Mechanical

Review on dynamics of cracked gear systems

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2015)

添加到收藏夹

Article Engineering, Mechanical

Dynamic characteristics of helical gears under sliding friction with spalling defect

Hanjun Jiang et al.

ENGINEERING FAILURE ANALYSIS (2014)

添加到收藏夹

Article Acoustics

Research on dynamics and fault mechanism of spur gear pair with spalling defect

Rui Ma et al.

JOURNAL OF SOUND AND VIBRATION (2012)

添加到收藏夹

Article Acoustics

Parametric Instability of Planetary Gears Having Elastic Continuum Ring Gears

Robert G. Parker et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Acoustics

Vibration modes of planetary gears with unequally spaced planets and an elastic ring gear

Robert G. Parker et al.

JOURNAL OF SOUND AND VIBRATION (2010)

添加到收藏夹

Article Mechanics

Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

添加到收藏夹

Article Engineering, Mechanical

Modeling of spur and helical gear planetary drives with flexible ring gears and planet carriers

V. Abousleiman et al.

JOURNAL OF MECHANICAL DESIGN (2007)

添加到收藏夹

Article Engineering, Mechanical

A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analyses of planetary/epicyclic gear sets

V. Abousleiman et al.

MECHANISM AND MACHINE THEORY (2006)

添加到收藏夹

Letter Acoustics

A deformable body dynamic analysis of planetary gears with thin rims

A Kahraman et al.

JOURNAL OF SOUND AND VIBRATION (2003)

添加到收藏夹

Article Engineering, Mechanical

Effect of internal gear flexibility on the quasi-static behavior of a planetary gear set

A Kahraman et al.

JOURNAL OF MECHANICAL DESIGN (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.