相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Patient-specific Ti-6Al-4V lattice implants for critical-sized load-bearing bone defects reconstruction
Amit Benady et al.
MATERIALS & DESIGN (2023)
Surface engineering of wrought and additive layer manufactured Ti-6Al-4V alloy for enhanced load bearing and bio-tribocorrosion applications
Erfan Abedi Esfahani et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Oliver Bittredge et al.
MATERIALS (2022)
Corrosion behavior of AM-Ti-6Al-4V: a comparison between EBM and SLM
Polina Metalnikov et al.
PROGRESS IN ADDITIVE MANUFACTURING (2022)
Electron beam surface remelting enhanced corrosion resistance of additively manufactured Ti-6Al-4V as a potential in-situ re-finishing technique
Mohammadali Shahsavari et al.
SCIENTIFIC REPORTS (2022)
Application of 3-dimensional printing implants for bone tumors
Jong Woong Park et al.
CLINICAL AND EXPERIMENTAL PEDIATRICS (2022)
Additive Manufacturing of Ti-6Al-4V alloy for Biomedical Applications
Yashwanth Kumar Balasubramanian Gayathri et al.
Journal of Bio- and Tribo-Corrosion (2022)
Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity
Rachael Sharp et al.
MATERIALS (2022)
The role of node fillet, unit-cell size and strut orientation on the fatigue strength of Ti-6Al-4V lattice materials additively manufactured via laser powder bed fusion
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Corrosion Resistance of the CpTi G2 Cellular Lattice with TPMS Architecture for Gas Diffusion Electrodes
Bozena Losiewicz et al.
MATERIALS (2021)
The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants
Dalia Mahmoud et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Corrosion behavior and characteristics of passive films of laser powder bed fusion produced Ti-6Al-4V in dynamic Hank's solution
Liang-Yu Chen et al.
MATERIALS & DESIGN (2021)
Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading
Lei Yang et al.
ADDITIVE MANUFACTURING (2021)
Effect of processing parameters and strut dimensions on the microstructures and hardness of stainless steel 316L lattice-emulating structures made by powder bed fusion
Cole Britt et al.
ADDITIVE MANUFACTURING (2021)
A multiscale optimisation method for bone growth scaffolds based on triply periodic minimal surfaces
E. F. Lehder et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2021)
Evaluating the Prospects of Ti-Base Lattice Infiltrated with Biodegradable Zn-2%Fe Alloy as a Structural Material for Osseointegrated Implants-In Vitro Study
Noa Gabay et al.
MATERIALS (2021)
Study on Corrosion Resistance and Bio-Tribological Behavior of Porous Structure Based on the SLM Manufactured Medical Ti6Al4V
Peipei Lu et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Prediction of anisotropic mechanical properties for lattice structures
Maxwell Munford et al.
ADDITIVE MANUFACTURING (2020)
The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process
Avi Leon et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
From Concept to Counter: A Review of Bringing an Orthopaedic Implant to Market
Donald H. Lee et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2020)
Investigation of electrochemical corrosion behavior of additive manufactured Ti-6Al-4V alloy for medical implants in different electrolytes
Ashutosh Sharma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
A Comprehensive Review on the Corrosion Pathways of Titanium Dental Implants and Their Biological Adverse Effects
Julio C. M. Souza et al.
METALS (2020)
Fatigue crack growth under corrosive environments of Ti-6Al-4V specimens produced by SLM
J. S. Jesus et al.
ENGINEERING FAILURE ANALYSIS (2020)
Non-destructive simulation of node defects in additively manufactured lattice structures
Bill Lozanovski et al.
ADDITIVE MANUFACTURING (2020)
Design of Metallic Lattices for Bone Implants by Additive Manufacturing
Daniel Barba et al.
TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS (2020)
Progression of Bio-Tribocorrosion in Implant Dentistry
Caroline Dini et al.
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2020)
Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation
Bruna C. Costa et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering
Cambre N. Kelly et al.
ACTA BIOMATERIALIA (2019)
Bone loss around oral and orthopedic implants: An immunologically based condition
Tomas Albrektsson et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2019)
Multi-scale mapping for collagen-regulated mineralization in bone remodeling of additive manufacturing porous implants
Pei-I. Tsai et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Effects of Electropolishing on Mechanical Properties and Bio-Corrosion of Ti6Al4V Fabricated by Electron Beam Melting Additive Manufacturing
Yao-Cheng Wu et al.
MATERIALS (2019)
Corrosion behavior of additively manufactured Ti-6Al-4V parts and the effect of post annealing
Ali Hemmasian Ettefagh et al.
ADDITIVE MANUFACTURING (2019)
Corrosion and Corrosion Fatigue Properties of Additively Manufactured Magnesium Alloy WE43 in Comparison to Titanium Alloy Ti-6Al-4V in Physiological Environment
Nils Wegner et al.
MATERIALS (2019)
The design of additively manufactured lattices to increase the functionality of medical implants
Hanna E. Burton et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review
Li Yuan et al.
BIOACTIVE MATERIALS (2019)
Chemical etching as a finishing process for Electron Beam Melting (EBM) Parts
Adrien Dolimont et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Physicochemical Properties and Structure of the Bone Matrix in Simulated Tuberculous Osteitis
V. K. Krut'ko et al.
TECHNICAL PHYSICS (2019)
Additive manufacturing to veterinary practice: recovery of bony defects after the osteosarcoma resection in canines
Vladimir V. Popov et al.
BIOMEDICAL ENGINEERING LETTERS (2019)
Influence of sulfides on the passivation behavior of titanium alloy TA2 in simulated seawater environments
Xiaojia Yang et al.
APPLIED SURFACE SCIENCE (2018)
Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
Tse-Ming Chiu et al.
ELECTROCHIMICA ACTA (2018)
Corrosion fatigue behavior of Ti-6A1-4 V: Chemical and mechanical driving forces
S. Baragetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
Rebecca F. Schaller et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Design and analysis of strut-based lattice structures for vibration isolation
Wahyudin P. Syam et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Angle defines attachment: Switching the biological response to titanium interfaces by modifying the inclination angle during selective laser melting
Avik Sarker et al.
MATERIALS & DESIGN (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
Untitled
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Corrosion behaviour and cell interaction of Ti-6Al-4V alloy prepared by two techniques of 3D printing
Jaroslav Fojt et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Regulating 3D-printed medical products
Laura M. Ricles et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
The influence of laser parameters, scanning strategies and material on the fatigue strength of a stochastic porous structure
Shaaz Ghouse et al.
ADDITIVE MANUFACTURING (2018)
Use of fused deposit modeling for additive manufacturing in hospital facilities: European certification directives
Joel J. Otero et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo
Bingjing Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Stainless steel with tailored porosity using canister-free hot isostatic pressing for improved osseointegration implants
Hany Hassanin et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline
Yun Bai et al.
CORROSION SCIENCE (2017)
Role of surface roughness on corrosion and fretting corrosion behaviour of commercially pure titanium in Ringer's solution for bio-implant application
Bose Sivakumar et al.
APPLIED SURFACE SCIENCE (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
Ross Cunningham et al.
JOM (2016)
Influence of the overall stiffness of a load-bearing porous titanium implant on bone ingrowth in critical-size mandibular bone defects in sheep
T. Schouman et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Biomedical titanium alloys and their additive manufacturing
Yu-Lin Hao et al.
RARE METALS (2016)
Dynamic Behavior of Engineered Lattice Materials
J. A. Hawreliak et al.
SCIENTIFIC REPORTS (2016)
Biomedical titanium alloys with Young's moduli close to that of cortical bone
Mitsuo Niinomi et al.
REGENERATIVE BIOMATERIALS (2016)
A method to design biomimetic scaffolds for bone tissue engineering based on Voronoi lattices
M. Fantini et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Passivity breakdown, pit initiation and propagation of pits in metallic materials - Review
J. Soltis
CORROSION SCIENCE (2015)
The Electrochemical Behavior of the NiTi Alloy in Different Simulated Body Fluids
Alana Witt Hansen et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
Chunze Yan et al.
MATERIALS & DESIGN (2014)
Notch Corrosion Fatigue Behavior of Ti-6Al-4V
Sergio Baragetti
MATERIALS (2014)
Direct Metal Laser Sintering Titanium Dental Implants: A Review of the Current Literature
F. Mangano et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2014)
How smart do biomaterials need to be? A translational science and clinical point of view
Boris Michael Holzapfel et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
Pore Geometry Regulates Early Stage Human Bone Marrow Cell Tissue Formation and Organisation
J. Knychala et al.
ANNALS OF BIOMEDICAL ENGINEERING (2013)
Characterization of AISI 1005 corrosion films grown under cyclic voltammetry of low sulfide ion concentrations
N. Perini et al.
CORROSION SCIENCE (2013)
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Lenders et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
Johan Van der Stok et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Revision surgery of reverse shoulder arthroplasty
Pascal Boileau et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2013)
Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys
G. Q. Wu et al.
MATERIALS & DESIGN (2013)
Diamond like carbon coatings for potential application in biological implants-a review
C. A. Love et al.
TRIBOLOGY INTERNATIONAL (2013)
Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation
Renato Altobelli Antunes et al.
ACTA BIOMATERIALIA (2012)
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
S. Van Bael et al.
ACTA BIOMATERIALIA (2012)
Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting
S. J. Li et al.
ACTA MATERIALIA (2012)
How Linear Tension Converts to Curvature: Geometric Control of Bone Tissue Growth
Cecile M. Bidan et al.
PLOS ONE (2012)
Study of the biotribocorrosion behaviour of titanium biomedical alloys in simulated body fluids by electrochemical techniques
M. K. Dimah et al.
WEAR (2012)
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Lawrence E. Murr et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2012)
Minimal surface scaffold designs for tissue engineering
Sebastian C. Kapfer et al.
BIOMATERIALS (2011)
Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution
T. M. Manhabosco et al.
CORROSION SCIENCE (2011)
Numerical simulations study of the localized corrosion resistance of AISI 316L stainless steel and pure titanium in a simulated body fluid environment
K. Yaya et al.
CORROSION SCIENCE (2011)
Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
I. Cvijovic-Alagic et al.
CORROSION SCIENCE (2011)
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
Digby D. Macdonald
ELECTROCHIMICA ACTA (2011)
Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures
Vaibhav Bagaria et al.
EUROPEAN JOURNAL OF RADIOLOGY (2011)
Failure Modes of 433 Metal-on-Metal Hip Implants: How, Why, and Wear
Edward Ebramzadeh et al.
ORTHOPEDIC CLINICS OF NORTH AMERICA (2011)
Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies-Electron Beam Melting and Laser Beam Melting
Mari Koike et al.
MATERIALS (2011)
Corrosion Behavior of Ti-6Al-4V with Different Thermomechanical Treatments and Microstructures
M. Atapour et al.
CORROSION (2010)
Roles of microstructure in fatigue crack initiation
Kwai S. Chan
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Highly porous titanium scaffolds for orthopaedic applications
Bogdan Dabrowski et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
In-service fatigue failure of engineered products and structures - Case study review
Colin R. Gagg et al.
ENGINEERING FAILURE ANALYSIS (2009)
Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V
L. E. Murr et al.
MATERIALS CHARACTERIZATION (2009)
Triboelectrochemical behaviour of a Si3N4-TiN ceramic composite and a titanium alloy commonly used in biomedical applications
C. Monticelli et al.
WEAR (2009)
Special modes of corrosion under physiological and simulated physiological conditions
S. Virtanen et al.
ACTA BIOMATERIALIA (2008)
Biomedical applications of titanium and its alloys
C. N. Elias et al.
JOM (2008)
Orthopaedic surgeon workforce and volume assessment for total hip and knee replacement in the united states: Preparing for an epidemic
Richard Iorio et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2008)
The FDA process for the evaluation and approval of orthopaedic devices
John S. Kirkpatrick et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2008)
Biomaterials in orthopaedics
M. Navarro et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2008)
Metal-on-metal hip resurfacing - A skeptic's view
Paul F. Lachiewicz
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2007)
Growth and dissipation in biological tissues
D. Ambrosi et al.
CONTINUUM MECHANICS AND THERMODYNAMICS (2007)
Stress-modulated growth
D. Ambrosi et al.
MATHEMATICS AND MECHANICS OF SOLIDS (2007)
Aseptic loosening of total joint replacements: mechanisms underlying osteolysis and potential therapies
Yousef Abu-Amer et al.
ARTHRITIS RESEARCH & THERAPY (2007)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
Changing demographics of patients with total joint replacement
Roy D. Crowninshield et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2006)
The properties of foams and lattices
MF Ashby
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces
J Qu et al.
WEAR (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Electrochemical techniques for studying tribocorrosion processes
P Ponthiaux et al.
WEAR (2004)
Effect of surface finish on the osseointegration of laser-treated titanium alloy implants
HE Götz et al.
BIOMATERIALS (2004)
The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution
M Metikos-Hukovic et al.
BIOMATERIALS (2003)
Sequence of steps in the pitting of aluminum by chloride ions
E McCafferty
CORROSION SCIENCE (2003)
Failure analysis of a commercially pure titanium plate for osteosynthesis
CRF Azevedo
ENGINEERING FAILURE ANALYSIS (2003)
In vitro MC3T3 osteoblast adhesion with respect to surface roughness of Ti6A14V substrates
P Linez-Bataillon et al.
BIOMOLECULAR ENGINEERING (2002)
Effect of friction on anodic polarization properties of metallic biomaterials
Y Okazaki
BIOMATERIALS (2002)
Fatigue of biomaterials: a review
SH Teoh
INTERNATIONAL JOURNAL OF FATIGUE (2000)
Four-year follow-up results of lumbar spine arthrodesis using the Bagby and Kuslich lumbar fusion cage
SD Kuslich et al.
SPINE (2000)
Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy
I Milosev et al.
BIOMATERIALS (2000)
Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments
RA Zavanelli et al.
JOURNAL OF PROSTHETIC DENTISTRY (2000)